BG-3300.1D BRUTUS GAMMA 3300 Watt Amplifier - Hifonics

Amplifier

Hifonics

BRUTUS GAMMA

Mobile

New

Bright Silver Hairline Anodized Finish

BXX-3000.1D

1 Year

Universal

Super D-Class®

1

3300

1 x 3300

1 x 1650

1 x 825

Variable Electronic 12dB Per Octave

30Hz-250Hz

Built-in Bass Control

0-10dB

15Hz-35Hz

0-180 Degrees

0.2-9V

10Hz-500Hz

< 0.1%

Yes

2 AWG

12 AWG

External

Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.

Nickel-plated RCA jacks create the most efficient High/Low Level audio connection and resist corrosion.

Mono only

Variable electronic crossovers allow for complete control of the sound.

Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers.

Super D-Class™ designs which employ high-speed microprocessors with proprietary D/A conversion algorithms to efficiently control the current consumption. At very high listening levels, Hifonics amplifiers with Super D-Class circuitry result in lower distortion, higher current efficiencies and less heat than conventional D-Class amplifier designs.

Pro-Fi™ Output Device Technology: The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion.

Classic aluminum Hifonics design to minimize heat build up on the Ultra-Fi™ output devices.

Simpatico Coil Design: The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices.

High temperature impact resistant nickel plated connectors with allen head set screws which allow for secure termination of wire and creates an erosion resistant seal.

Secure molded connection terminal for all Power, Ground and Speaker connections. Angled for ease of access while creating a clean wire mangement profile.

Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel.

Wired Bass Remote allows adjustments to bass frequencies from the control which can be mounted anywhere in the vehicle.

Phase 0-180°: Bass drum attack, snap requires phase between deep frequency subwoofers and upper midbass speakers.

Power Strapping allows the installer to Sync the input signal and output power to double the rated output of a mono amplifier which will drive a single subwoofer or group of subwoofers. Driving subwoofers with this method doubles the available power to the overall bass system, while insuring each subwoofer receives the exact same power level (output voltage). CONSULT PROFESSIONAL INSTALLER.

Hifonics BRUTUS GAMMA Amplifierss (BG) Quick Start Guide (Rev1)