3D Models GadgetsPhoto & Video Bird Watching Case for Raspberry Pi HQ Camera 3 reviews 15gimpelginster @gimpelginster FollowFollowing This is a remote controlled camera setup. I use it for bird watching. It contains a RPi Pi 4b and the RPi HQ camera. 16h 20m 2× print file 0.20 mm 0.40 mm PLA 160.00 g Prusa MINI / MINI+ Download LikeShareIn the contest Cameras And Accessories 49 168 3 1909 updated June 21, 2024
Description
PDF
MATERIAL
Raspberry Pi 4b
Raspberry HQ Camera
C-mount lens. In my case a 100mm telephoto lens.
Cooling housing for RPi 4b (total height below 24mm)
Anker 2000PD or Anker 325 Powerbank
USB-A to -C cable
Threaded inserts for tripod mount. I used this one: ¼" x 21,7mm
4x M2,5*10mm screws
4x M2,5*20mm screws
SOFTWARE
I'm using RPi Cam Control which lets me see the video stream and take photos from my laptop or phone via wifi.
PRINT INSTRUCTIONS
This model does not require any supports when printed standing upright and is just compact enough to fit into the Prusa Mini's build-volume. I printed it in PLA but other materials should also be fine.
ASSEMBLY
Melt the insert into the bottom of the “body” part. Follow the instructions for doing so carefully.
Attach the HQ camera to the "body" part using the M2,5*10mm screws
Put the Raspberry with the cooling housing into the recess.
Connect the camera to the raspberry pi with a ribbon cable. Make sure not to damage the ribbon cable. In my case it worked best to lead it underneath the raspberry.
Place the power bank inside the compartment above the Raspberry pi.
Click in the lid and power the setup via the USB C to USB A cable.
Tags
cameraraspberryremoteraspberrypirpi + more
Model origin
The author marked this model as their own original creation.
15 gimpelginster @gimpelginster Follow Following This is a remote controlled camera setup. I use it for bird watching. It contains a RPi Pi 4b and the RPi HQ camera. 16h 20m 2× print file 0.20 mm 0.40 mm PLA 160.00 g Prusa MINI / MINI+ Download Like Share In the contest Cameras And Accessories 49 168 3 1909 updated June 21, 2024 
███████ 
█████ 
███████ 
██████