Brass Rods - Baylanmetal

Trang chủ » Cw602n 4ms » Brass Rods - Baylanmetal

Có thể bạn quan tâm

  • MAIN PAGE
  • CORPORATE
  • PRODUCTS
    • HOT FORGING
    • CASTING
  • QUALITY
  • CONTACT
Hot Forging

Brass rods are produced according to EN12165 and UBA standards, these type of brass rods are suitable for hot forging and good machinablity. Our products meets the requirements of ROHS and REACH diretives.

Brass Rods Billets
STANDARD ALLOYS
ALLOY Cu Pb Sn Fe Ni Al Mn As Si P Zn Others Design & ref to normative
CW617N UBA Min Max 57,0 59,0 1,6 2,2 - 0,3 - 0,3 - 0,1 - 0,05 - - - - - 0,03 - - Rest - - 0,2 CuZn40Pb2 DIN 50936-6
Standard alloy for hot forging. Included in 4MS "Positive List.
CW617N Min Max 57,0 59,0 2,0 2,5 - 0,3 - 0,3 - 0,3 - 0,05 - - - - - - - - Rest - - 0,2 CuZn40Pb2 EN12165
Standard alloy for hot forging with lead < 2%. Included in 4MS "Positive List.
CW612N UBA Min Max 59,0 60,0 1,6 2,2 - 0,3 - 0,3 - 0,1 - 0,05 - - - - - 0,03 - - Rest - - 0,2 CuZn39Pb2 DIN 50930-6
High copper content alloy for hot forging. Included in 4MS "Positive List.
ALLOYS RESISTANT TO CORROSION
ALLOY Cu Pb Sn fe Ni Al Mn As Si P Zn Others Design & ref to normative
CW602N Min Max 61,0 63,0 1,7 2,8 - 0,1 - 0,1 - 0,3 - 0,05 - 0,1 0,02 0,15 - - - - Rest - - 0,2 CuZn36Pb2As
Standard anti-dezincification alloy for hot forging.
Casting

Baylan uses modern casting technologies to cast ingots according to EN1982 and UBA standards. Ingots can be produced by continues casting or die casting depending on the custumer’s choice. Each Ingot weight is approximately 10-12 kg.

Brass Ingots
STANDARD ALLOYS
ALLOY Cu Pb Sn Fe Ni Al Mn As Si P Zn Others Design & ref to normative
CC770S UBA Min Max 62,0 64,0 0,2 1,6 - 0,3 - 0,3 - 0,2 0,5 0,7 - 0,1 0,04 0,14 - 0,02 - - Rest - - 0,2 CuZn36Pb-C
Included in 4MS "Positive List.
CC757S UBA Min Max 58,0 63,0 0,2 1,4 - 0,5 - 0,3 - 0,2 0,3 0,9 - 0,05 - - - 0,05 - - Rest - - 0,2 CuZn39Pb1Al-C
Included in 4MS "Positive List.
CC752S Min Max 61,0 63,0 1,4 1,6 - 0,3 - 0,3 - 0,2 0,5 0,7 - 0,1 0,09 0,13 - 0,02 - - Rest - - 0,2 CuZn35Pb2Al-C DIN50930-6
CC752S Min Max 61,5 64,5 1,5 2,2 - 0,3 - 0,3 - 0,2 0,3 0,7 - 0,1 0,04 0,14 - 0,02 - - Rest - - 0,2 CuZn35Pb2Al-C EN 1982
CC754S Min Max 58,0 60,0 0,5 2,5 - 0,8 0,4 0,7 - 1,0 0,4 0,8 - 0,5 - - - 0,05 - 0,02 Rest - - 0,2 CuZn39Pb1Al-C EN 1982
CC753S Min Max 58,0 60,0 1,8 2,5 - 0,8 0,5 0,8 - 0,1 0,4 0,8 - 0,1 - - - 0,05 - - Rest - - 0,2 CuZn37Pb2Ni1AlFe-C EN 1982
Raw materials
  • Casting
  • Extruded Products
Quality
  • What is Quality?
  • Workplace Health & Safety
Products
  • Hot Forgiıng
  • Casting
Copyright © All Rights Reserved | Design By Baylan Baylan

Từ khóa » Cw602n 4ms