BUI QUOC BAO | Faculty Of Civil Engineering

1. Educations and works

From 9/2016           Associate Professor at Faculty of Civil Engineering, Ton Duc Thang University, Vietnam

From7-2018            Director of Foundation for Science & Technology Development (FOSTECT), Ton Duc Thang University,Vietnam

9/2011-8/2016        Associate Professor at Polytech Annecy-Chambery, UniversitySavoie Mont Blanc, France

11/2008-08/2011     Postdoc and Assisstant Professor in dynamic of structures and non-conventional materials, at National School of CivilEngineeringLyon, (Ecole Nationale des Travaux Publics de l’Etat - ENTPE), Lyon, France.

10/2005-11/2008     PhD thesis, Ecole Nationale des Travaux Publics de l’Etat (ENTPE), Lyon.

                                  10/2004-9/2005       Master, ENTPE Lyon (France).

9/1999-02/2004       Engineer student, Department of Civil Engineering, Polytechnic School of Ho Chi Minh City (Vietnam)

2. Teaching experiences

From 9/2016:          Associate Professor at Ton Duc Thang University, Vietnam. Courses: Reinforced concrete structures, Construction materials, Plasticity, Steel structures, construction projects.

9/2011-8/2016:        Associate professor at Polytech Annecy-Chambéry (University Savoie Mont-Blanc). Courses:Reinforced concrete structures, Concrete material, Structural analysis, Scheduling in construction, Geotechnique.

2008-2011:             Assistant professor at ENTPE, Lyon. Courses:Structural analysis, Reinforced concrete structures

 

Visiting Professor:

§  12/2015:Universitas Indonesia, Jakarta, Indonesia (1 week): Design of Reinforced Concrete Structures to Eurocodes (Eurocodes 2 and 8).

§  7/2015: Indian Institute of Sciences, Bangalore, India (2 weeks): masonry and non-conventional materials.

 

3. Research fields

§  Dynamic of structures: vibrational measurements, in-situ non-destructive tests, earthquake behavior.

§  Reinforced concrete frame structures: beam-column joints

§  Non-conventional materials: sustainable development, rammed-earth material, non-conventional concrete,unburnt bricks, mechanical-thermal-hyricbehavior.

§  Numerical simulation: finite element method, discrete element method.

 

 

4. Publications

4.1. Articles in international journals

[1]        Bui QB, Limam A, Bui TT, “Dynamic discrete element modelling for seismic assessment of rammed earth walls”, Engineering Structures, 175 (2018) 690–699,(Corresponding author: Bui QB). ISSN: 0141-0296

 

[2]        El-Nabouch R, Bui Q B, Plé O, Perrotin P“Characterizing the shear parameters of rammed earth material by using a full-scale direct shear box”, Construction and Building Materials,Elsevier,Vol. 171, 20 May 2018, pp. 414–420.(Corresponding author: Bui QB).ISSN: 0950-0618

 

[3]        Bui QB, Nguyen DM, Nguyen TML, Kwac LK, Kim HG, Ko SC, Jeong H. “Free-standing Three Dimensional Graphene Incorporated with Gold Nanoparticles as Novel Binder-free Electrochemical Sensor for Enhanced Glucose Detection”, Journal of Electrochemical Science and Technology 2018, 9(X), 1-10, (ISSN: 20938551, 22889221)

 

[4]        NguyenD M, GrilletA-C, Bui Q-B, DiepT M H, WoloszynM, Building bio-insulation materials based on bamboo powder and bio-binders, Construction and Building Materials, 186 (2018) pp. 686–698, ISSN: 09500618, Elsevier,

 

[5]        Tran M-T, Bui Q-B, Sentosa B, Nguyen N-T, Duong T-H,  Plé O.“Sustainable RC Beam-Column Connections with Headed Bars: A Formula for Shear Strength Evaluation”,Sustainability, (2018),10(2), 401,MDPI. (Corresponding author: Bui Q-B)ISSN: 2071-1050.

 

[6]        Nguyen TKN, Kim HG, Kwac LK, Bui Q B, Nguyen D M, Jeong H, “Titanium dioxide-benzophenone hybrid as an effective catalyst for enhanced photochemical degradation of low density polyethylene”, e-Polymers, 2018, 2018-08-20 | DOI: https://doi.org/10.1515/epoly-2018-0078,De Gruyter.

 

[7]        El-Nabouch R, Pastore J, Bui Q B, Plé O,“Limit Analysis, rammedearthmaterial and Casagrande test”, ComptesrendusMecanique,Elsevier,Vol. 346, Issue 2, February 2018, pp. 98-109.

 

[8]        El-Nabouch R, Bui Q B, Perrotin P,Plé O, “Shear parameters of rammed earth material: results from different approaches”, Advances in Materials Science and Engineering (2018), Article ID 8214604, 9p,Hindawi, (Corresponding author: Bui QB) ISSN: 1687-8434.

 

[9]        Nguyen D-M, Grillet A-C, Woloszyn M, Bui Q B. “Influence of thermo-pressing conditions on insulation materials from bamboo fibers andproteins based bone glue”, Industrial Crops and Products, Elsevier,Vol. 111, January 2018, pp. 834-845.

 

[10]     El-Nabouch R, Bui Q B, Plé O, Perrotin P“Assessing the in-plane seismic performance of rammed earth walls by using horizontal loading tests”, Engineering Structures,Vol. 145, 15 August 2017, pp. 153–161, Elsevier, (Corresponding author: Bui Q-B). ISSN: 0141-0296.

 

[11]     Le D-H, Sheen Y-N, Bui Q B “An assessment on volume stabilization of mortar with stainless steel slag sand”, Construction and Building Materials, Volume 155, 30 November 2017, Pages 200-208, Elsevier.ISSN: 0950-0618

 

[12]     Bui Q-B“Assessing the rebound hammer test for rammed earth material”, Sustainability, (2017), 9, 1904,MDPI. (Corresponding author: Bui Q-B)ISSN: 2071-1050

 

[13]     BuiT.T., Limam A., Nana W.S.A, Ferrier E., Bost M., BuiQ.B. “Evaluation of one-way shear behavior of reinforced concrete slabs: Experimental and Numerical Analysis”, European Journal of Environmental and Civil Engineering, 3 Sep. 2017,Pages 1-27, Taylor & Francis, ISSN: 2116-7214.

 

[14]     Bui Q-B, Grillet A-C,Tran H-D “A Bamboo Treatment Procedure: Effects on the Durability and Mechanical Performance”, Sustainability, (2017)9(9), 1444, MDPI. (Corresponding author: Bui Q-B)ISSN: 2071-1050

 

[15]     Bui T T, Bui Q B, Limam A, Morel J C, “Modeling rammed earth wall using discrete element method”, Continuum Mechanics and Thermodynamics, March 2016, Volume 28, Issue 1, pp 523–538 Springer. (Corresponding author: Bui QB) ISSN: 0935-1175.

 

[16]     Bui Q B, Bui T T, Limam A“Seismic assessment of rammed earth walls using pushover tests”, Cogent Engineering,3: 1200835, Taylor & Francis(2016) (Corresponding author: Bui QB)ISSN: 2331-1916

 

[17]     Bui QB, Morel JC, Tran VH, Hans S, Oggero M. “How to use in-situ soils as building materials”, Procedia Engineering 145 (2016) 1119 – 1126 Elsevier. (Corresponding author: Bui QB)ISSN: 1877-7058.

 

[18]     Nabouch R, Bui Q B, Plé O, Perrotin P, Poinard C, Goldin T, PlassiardJP. “Seismic assessment of rammed earth walls using pushover tests”, Procedia Engineering, Elsevier (2016). (Corresponding author: Bui QB)ISSN: 1877-7058.

 

[19]     Bui Q B, Morel J-C. “First exploratory study on the ageing of rammed earth material”, Materials, (2015), 8, 1-15,MDPI.(Corresponding author: Bui QB)ISSN: 1996-1944

 

[20]     Bui Q B, Mommessin M, Perrotin P, Plassiard J P, Plé O. “Assessing local-scale damage in reinforced concrete frame structures using dynamic measurements”, Engineering Structures, (2014), pp. 22-31, Elsevier.(Corresponding author: Bui QB)ISSN: 0141-0296.

 

[21]     Bui Q B, Morel J C, Hans S, Walker P.“Effect of moisture content on the mechanical characteristics of rammed earth”, Construction and Building Materials, (2014)54, 163–169, Elsevier.(Corresponding author: Bui QB)ISSN: 0950-0618.

 

[22]     Bui T-T, Bui Q B, Limam A, Maximilien S.“Failure of rammed earth walls: from observations to quantifications”, Construction and Building Materials(2014), Volume 51, Pages 295–302, Elsevier.(Corresponding author: Bui QB), ISSN: 0950-0618.

 

[23]     Bui T-T, Limam A, Bui QB. “Characterization of vibration and damage in masonry structures: experimental and numerical analysis”, European Journal of Environmental and Civil Engineering(5 Feb. 2014), Taylor & Francis, ISSN: 2116-7214.

 

[24]     Bui Q B, Hans S., Boutin C. “Dynamic behaviour of an asymmetric building: experimental and numerical studies”,   Case Studies in Nondestructive Testing and Evaluation, Volume 2, October 2014, Pages 38–48, Elsevier.(Corresponding author: Bui QB), ISSN: 2214-6571

 

[25]     BuiQ B, MommessinM, PerrotinP, PlassiardJ-P, PléO. “Evaluation des endommagements à l’échelle locale des portiques en béton armé par mesures dynamiques”, Annales du bâtiment et des travaux publics, janvier-mars 2014.(Correspondingauthor: Bui QB)

 

[26]     Bui Q B, Hans S, Morel J-C, Do A-P.“First exploratory study on dynamic characteristics of rammed earth buildings”, Engineering Structures,(2011)vol. 33 (12), 3690–3695, Elsevier, ISSN: 0141-0296.

 

[27]     Bui Q B, Morel J C. “Assessing the anisotropy of rammed earth”, Construction and Building Materials, (2009)23: 3005-3011, Elsevier, ISSN: 0950-0618.

 

[28]     Bui Q B, Morel J C, Hans S, Meunier N.“Compression behaviour of nonindustrial materials in civil engineering by three scale experiments: the case of rammed earth”, Materials and Structures, (2009)vol. 42, N° 8: 1101-1116, Springer, ISSN: 1359-5997 (Print) 1871-6873 (Online).

 

[29]     Bui Q B, Morel J C, Reddy B V V, Ghayad W. “Durability of rammed earth walls exposed for 20 years to natural weathering”, Building and Environment, (2009)vol.44 (5): 912-919, Elsevier, ISSN: 0360-1323.

 

4.2. Books

[1]   Morel J C, Bui Q B, Hamard H. “Chapter 11: Weathering and durability”, pages 282–303, in: Modern earth buildings - Materials, engineering, construction and applications, Editors: Hall M, Lindsay R, Krayenhoff M, Woodhead Publishing, Cambridge (2012), ISBN-13: 978-0857090263, 810p.

 

[2]   Bui Q B, Thiếtkếkếtcấubêtôngcốtthéptheotiêuchuẩn Eurocode – Cơsởlýthuyếtvàvídụápdụng (Design of reinforced concrete structures following Eurocode 2), NXB Xây Dựng (1/2018), ISBN: 978-604-82-2335-9, 212p.

 

[3]   Bui Q B, Woloszyn M, Wets G, Cajka R, Guest Editor of the Special Issue "Sustainability in Civil Engineering: from Sustainable Materials to Sustainable Cities", Sustainability (ISSN 2071-1050), 2018.

 

[4]   Bui Q B, Cajka R, Tran M-T, Wets G, Woloszyn M, EditorofCUTE 2018 conference proceeding,IOP Conf. Series: Earth and Environmental Science 143 (2018)

 

4.3. Articles in conference proceedings

[1]        Nabouch R, Bui Q B, Plé O, Perrotin P.“Proposing limit states for in-plane seismic behavior of rammed earth walls”, 10th International Masonry Conference, Milano, 9-11 July 2018, International Masonry Society.

 

[2]        Bui Q-B, Phan T-A-Vu, Tran M-T, Le D-H. “Tentative to use wastes from thermal power plants for construction building materials”, CUTE 2018, IOP Conf. Series: Earth and Environmental Science 143 (2018) 012041.

 

[3]        Bui T T, Tran H V, Limam A, Bost M, Bui Q B, Robit P.“A new concept of precast concrete retaining wall: from laboratory model to the in-situ tests”, CUTE 2018, IOP Conf. Series: Earth and Environmental Science 143 (2018) 012001.

 

[4]        El-Nabouch R, Bui Q-B, Plé O, Perrotin P. “Proposing limit states for in-plane seismic assessment of rammed earth walls”, 10th International Masonry Conference, Milan, Italy, July 9-11, 2018.(Corresponding author: Bui QB).

 

[5]        Bui Q-B, El-Nabouch R, Perrotin P, Plé O.“Assessing a nondestructive method to determine the Young’s modulus of rammed earth material”, 6th BIOT Conference on Poromechanics, Paris, July 10-13, 2017, American Society of Civil Engineering. (Corresponding author: Bui QB).

 

[6]        El-Nabouch R, Bui Q-B, Perrotin P,Plé O.“Experimental and numerical studies on cohesion and friction angle of rammed earth material”, 6th BIOT Conference on Poromechanics, Paris, July 10-13, 2017, American Society of Civil Engineering. (Corresponding author: Bui QB).

 

[7]        BuiQ.-B., PrudhommeE., GrilletA.-C., Prime N. “An exploratory study on earthen materials stabilized by alkaline activator”, 2nd ICBBM&1st EcoGRAFI, Clermont-Ferrand, June 21- 23, 2017, RILEM.(Corresponding author: Bui QB).

 

[8]        TranH-D, BuiQ.-B., Grillet A.-C. “Assessing a method of bamboo treatment and its effects on the durability and mechanical performance”, 2nd ICBBM&1st EcoGRAFI, Clermont-Ferrand, June 21- 23, 2017, RILEM. (Corresponding author: Bui QB).

 

[9]        Bui Q.-B. “Nondestructive vibrational tests and analytical solutions to determine the Young’s modulus of rammed earth material”ACOME 2017 August 02 - 04, Phu Quoc, Vietnam, Lecture Notes in Mechanical Engineering,Springer (Corresponding author: Bui QB).

 

[10]     Bui Q-B, Tran M-T, Le D-H,“Using wastes from thermal power plants for manufacturing of low strength construction materials”, CIGOS 2017, October 26-27, 2017, Ho Chi Minh City, Lecture Notes in Civil Engineering,p. 617-626, Springer.

 

[11]     Bui Q-B, Prud’homme E, Grillet A-C, Prime N, “An experimental study on earthen materials stabilized by Geopolymer”, CIGOS 2017, October 26-27, 2017, Ho Chi Minh City, Lecture Notes in Civil Engineering, p. 319-328, Springer.

 

[12]     Nguyen M-T, Tran M-T, Bui Q-B,“A new formula for the shear strength of exterior RC beam-column joints using headed bars”, CIGOS 2017, October 26-27, 2017, Ho Chi Minh City, Lecture Notes in Civil Engineering, Springer.(Corresponding author: Bui QB).

 

[13]     BuiQ.-B., SentosaB., Duong T.-H. “A numerical modeling of RC beam-column joints compared to experimental results” CIGOS 2017, October 26-27, 2017, Ho Chi Minh City, Chapter 5, Lecture Notes in Civil Engineering,59-67,Springer.(Corresponding author: Bui QB).

 

[14]     SentosaB., BuiQ.-B., PlassiardJ.-P., PléO., PerrotinP., Purnomo H. “Redistribution of moment at beam-column joints in RC structures: comparison between an experimental study and Eurocode 2”, CIGOS 2017, October 26-27, 2017, Ho Chi Minh City, Lecture Notes in Civil Engineering,233- 242,Springer. (Corresponding author: Bui QB).

 

[15]     Bui Q B, Morel JC, Tran VH, Hans S, Oggero M. “How to use in-situ soils as building materials”, International Conference on Sustainable Design, Engineering and Construction, Tempe, USA, Elsevier, May 18-20, 2016, paper 312.(Corresponding author: Bui QB).

 

[16]     Nabouch R, Bui Q B, Plé O, Perrotin P, Poinard C, Goldin T, PlassiardJP. “Seismic assessment of rammed earth walls using pushover tests”, International Conference on Sustainable Design, Engineering and Construction, Tempe, USA, Elsevier, May 18-20, 2016, paper 326.(Corresponding author: Bui QB).

 

[17]     El-Nabouch R, Bui Q-B, Prime N, Perrotin P, Plé O, Poinard C, Goldin T, Plassiard J-P, Jaffré M, Teytu L. “Comportement de murs en pisé sous poussée progressive : études expérimentales et numériques ”, 34èmes Rencontres de l’AUGC, Liège, Belgique, 25-27 mai 2016.(Corresponding author: Bui QB).

 

[18]     Nabouch R, Bui Q B, Perrotin P, Plé O, Plassiard J-P. “Numerical modeling of rammed earth constructions: analysis and recommendations”, 1st International  Conference  on  Bio-based  Building  Materials, Clermont Ferrand (France), RILEM,June 21-24, 2015.(Corresponding author: Bui QB).

[18]

[19]     TranVH, BuiQB, MorelJC, HansS, Oggero M.“Sustainable building with local material: a case study”, 1st International  Conference  on  Bio-based  Building  Materials, Clermont Ferrand (France),RILEM, June 21-24, 2015.(Corresponding author: Bui QB).

 

[20]     Eymard M, Bui Q B, Plassiard J P, Perrotin P, Plé O.“Influence d’un enduit d’isolation thermique sur le comportement parasismique des murs en maçonnerie non-renforcée”, AFPS2015 : 9ème Colloque National - Anticiper, limiter et gérer les effets des séismes dans les territoires, 30 nov - 2 dec2015 Champs-sur-Marne (France).(Corresponding author: Bui QB).

 

[21]     El NabouchR, BuiQ B, PerrotinP, PléO, PlassiardJP. “Modélisation numérique de structures en pisé: analyses et recommandations”, RUGC15, 27-29 mai 2015, Pau, France.(Corresponding author: Bui QB).

 

[22]     Sentosa B O B, Bui Q B, Plassiard J P, O Plé, Perrotin P.“Evaluation des endommagements dans les structures BA à partir de mesures vibratoires: études expérimentales et numériques”, RUGC15, 27-29 mai 2015, Pau, France.(Corresponding author: Bui QB).

 

[23]     Sentosa B O B, Bui Q B, Plassiard J P, O Plé, Perrotin P. “Assessing the column-beam connection’s damages by vibrational tests: experimental and analytical studies”, CIGOS 2015, May 11-12, 2015, Cachan, France.(Corresponding author: Bui QB).

 

[24]     BuiQ B, Morel J C.“The creep of rammed earth material”, in: Rammed Earth Construction – Cutting-Edge Research on Traditional and Modern Rammed Earth, 11-13 Feb. 2015, Perth, Australia, CRC Press, Taylor & Francis, ISBN: 978-1-138-02770-1. (Corresponding author: Bui QB).

 

[25]     BuiQ B, BuiT T, LimamA, MorelJC. “Discreteelement modeling of rammed earth walls”, in: Rammed Earth Construction – Cutting-Edge Research on Traditional and Modern Rammed Earth, 11-13 Feb. 2015, Perth, Australia, CRC Press, Taylor & Francis, ISBN: 978-1-138-02770-1.(Corresponding author: Bui QB).

 

[26]     BuiQ B, MommessinM, PerrotinP, PlassiardJ-P, PléO. “Evaluation des endommagements à l’échelle locale des portiques en béton armé par mesures dynamiques”, Congrès Diagnobéton 2014, Toulouse, France, 9 et 20 mars 2014.(Corresponding author: Bui QB).

 

[27]     BuiT T, LimamA, BuiQ B. “Vibration et caractérisation du dommage de structures maçonnées: Analyse expérimentale et numérique”, AUGC 2013,29-31 mai, 2013, Cachan, France.

 

[28]     HansS, BoutinC, ChesnaisC, RalluA, BuiQ B.“From ambient mechanical noise to the structural functioning of regular buildings”, 15th World Conference on Earthquake Engineering 1530, 24-28 Sept. 2012, Lisbon, Portugal.

 

[29]     Bui Q B, Plassiard J-P, Mommessin M, Perrotin P.“Evaluation par des mesures dynamiques de l’endommagement à l’échelle locale de portiques en béton armé”, AUGC-IBPSA 2012,6-8 juin, 2012, Chambéry, France.

 

[30]     Bui Q B, Hans S, Morel J C, Mollion V. “Influence of water on the mechanical characteristics of rammed-earth material”, 12th International Conference on Structural Repairs and Maintenance of Heritage Architecture, 5-7 Sept. 2011, Tuscany, Italy, ISBN: 978-1-84564-526-7.

 

[31]     Bui Q B, Hans S, Boutin C.“Dynamic investigations on an asymmetric building: experimental and modeling studies”, Conférence des Immeubles de Grande Hauteur et des Ouvrages Souterrains,Nov. 18-19, 2010, Paris, France.(Corresponding author: Bui QB).

 

[32]     Bui Q B, Morel J C. “Assessing the Anisotropy of Rammed Earth”, 11th International Conference on Non-conventional Materials and Technologies, Theme: Materials for sustainable and affordable construction, Sept. 6-9, 2009, Bath, UK.

 

[33]     Bui Q B, Morel J C, Hans S.“Compression behaviour of rammed-earth material”, AdobeUSA 2009, p. 215-222,May 15-17, 2009, El Rito, New Mexico, USA.

 

[34]     Kouakou C H, Bui Q B, Morel J C.“Mechanical performance of unstabilised adobes”,  AdobeUSA 2009, p. 167-174,May 15-17, 2009, El Rito, New Mexico, USA.

 

[35]     Marcom A, Floissac L,Colas A S, Bui Q B, Morel J C.“How to assess the sustainability of building construction process”, “Fifth Urban Research Symposium - Cities and Climate Change: Responding to an Urgent Agenda”, June 28-30, 2009, Marseille, France.

 

[36]     Bui Q B, Hans S, Morel J C.“Assessing parameters used to seismic design of rammed earth buildings”, Archaeoseismicity and improvement of European old constructions in a lasting development culture, 12- 2008, Manosque,France.

 

[37]     Bui Q B, Morel J C. “Durability of rammed earth walls exposed for 20 years to natural weathering”. International Symposium on Earthen Structures, Bangalore 08 - 2007, India, p. 113-120.

 

[38]     Bui Q B, Hans S, Morel J C. “The compressive strength and pseudo elastic modulus of rammed earth”. International Symposium on Earthen Structures, Bangalore 08 - 2007, India, p. 217-223.

 

5. Supervisions

5.1.                 PhD these

 

1. PhD thesis 1

Thesis title: « Mechanical behavior of rammed earth walls under pushover tests».

PhD candidate: Ranime EL NABOUCH, defended: 08/06/2017

Supervisors:  Olivier PLE, Quoc-Bao BUI, Pascal PERROTIN

 

2. PhD thesis 2:

Thesis title: « Assessing the structural elements of reinforced concrete building using dynamic measurements »

PhD candidate: Bastian SENTOSA, defended 27/09/2018.

Supervisors: Olivier PLE, Quoc-Bao BUI, Jean-Patrick PLASSIARD

 

 

5.2.                 Master these:

1. Masterthesis 1:

Title : « Mise au point d’une méthode de calcul des flèches de dalles allégées U-boot» (in French)

Master student: Anthony LABERTHONIERE(2014)

Supevisor:  Quoc-Bao BUI

 

2. Master thesis 2:

Title : « Expérimentations en vue de l’optimisation mécanique des matériaux locaux pour la construction » (in French)

Master student: Van-Huong TRAN (2010)

 

3. Master thesis 3:

Title : « Construction en terre:Mesure de succions sur éprouvettes de terre damées »(in French)

Master student: Huy-Viet PHAM (2010)

 

 

6. Responsibilities

§  Since 7/2017: LEAR (Legal Entity Appointed Representative) of a European H2020 project (H2020-MSCA-RISE-2017), project TRAC (2018-2022). Total amount: 450 000 euros.

§  Main Editor of the Special Issue "Sustainability in Civil Engineering: from Sustainable Materials to Sustainable Cities", Sustainability (ISSN 2071-1050), 2018.

§  Manager of aNAFOSTED project (funded by the VietnameseNational Foundation for Science & Technology Development). Total amount: 600 000 000VND (2018-2020).

§  Manager of the task 3 (amount187 000 euros)of the French national project ANR Primaterre (funded by the French National Research Agency). Total amount: 870 000 euros (2013-2017).

§  Since 3/2016: Member of a RILEM committee for the redaction of an International Standard on a non-conventional material (TC TCE, Cluster A).Manager of a section.

§  1/2014-8/2016 : Administrator of “Scientific board” of the Laboratoire Optimisation de la Conception et Ingénierie de l'Environnement (LOCIE).

§  9/2013-8/2016: Elected member of the Strategic Orientation Committee (COS) of Polytech.

 

7. Member of scientific and organization committees of international conferences

§  Member of Scientific Committee of CIGOS 2019, November 2019, Hanoi, Vietnam.

§  Member of Scientific Committee of the 11th International Conference on Structural Analysis of Historical Constructions(SAHC2018), 11-13 September 2018, Peru.

§  Member of Scientific Committee of the International Symposium on Earthen Structures(ISES2018), 22-24 August 2018, Bangalore, India.

§  Member of Scientific Committee of CUTE 2018, 17-19 April 2018, Ho Chi Minh City, Vietnam.

§  Member of Scientific Committee of CIGOS 2017, 26-27 October 2017, Ho Chi Minh City, Vietnam.

§  Chairmanof the national conference“Constructions en terre crue: avancées scientifiques”, March 17-18,2016 in Chambery.

§  Member of the organization committee of the AUGC conference (French Civil Engineering academic association), June 2011.

 

8. Reviewer for international journals

§  “Construction and Building Materials”, Elsevier (10 articles),

§  “Engineering Structures”, Elsevier (6 articles)

§  “Earthquake Engineering and Engineering Vibration”,Springer (4 articles),

§  “Materials and Structures”, Springer (1 article)

§  “Journal of Materials in Civil Engineering”, ASCE (1 article)

§  “European Journal of Environmental and Civil Engineering”, Taylor & Francis(1 article)

§  “Cultural Heritage”, Elsevier (1 article)

§  “Sustainability”, MDPI (3 articles).

§  “Advances in Structural Engineering”,Taylor & Francis(1 article).

§  “Cogent engineering”, Cogent (1 article).