BXC² - Aereco

Có thể bạn quan tâm

BXC²

DEMAND CONTROLLED EXHAUST UNIT FOR MEV

A multifunctional exhaust unit to optimise indoor air quality and energy efficiency in MEV applications

The BXC gets a makeover and becomes the BXC2: new design, same features. It incorporates all of the functions one could want in an air exhaust unit: various activation modes, such as humidity sensitive, presence detection and switch are available to adapt the ventilation to occupants’ needs. The exhaust airflow is automatically modulated, in silent operation. The range of variable airflows can be set at installation to meet special needs, or to compensate for a lack of pressure; commissioning is also facilitated by the presence of a pressure plug, which allows measurement and easy calculation of the airflow.

Aereco has developed the BXC2 hps, a humidity sensitive exhaust unit that indicates to the occupant the operating status of the ventilation system. In addition to modulating the airflow according to humidity, this exhaust unit indicates whether the ventilation is operating correctly or not.

The BXC2 hps, is especially adapted to satisfy Section 1.2.2.10 of the Technical Guidance Documents (TGD) Part F 2019 of the new Building Regulations in Ireland.

Distribution of the BXC will be phased out and only the BXC2 will be supplied.

Home
Products
Exhaust units
BXC²

CONTACT-US

Humidity sensitive, presence detector and switch versions: modulates the airflow according to the various needs of the dwelling.

Airflow “+”: possibility of setting the airflow levels at installation up to + 50 m³/h on the max. airflow.

Advanced special versions: CO2, VOC, and remote control versions.

Silent working: quiet auxiliary airflow activation.

Battery indicator: buzzer to indicate low battery level.

Pressure plug: allows pressure measurement to determine the airflow.

Easy to maintain: removable shutter case and front cover for easy cleaning.

Description Characteristics Schematic Accessories Gallery Documents Description Characteristics Schematic Accessories Gallery Documents

Adjustable airflow at installation

The BXC2 extract grille offers a range of possible airflow settings to meet specific needs, or regulatory requirements. The fixed shutter can be set at one of six positions, with an average step between each setting of + 10 m3/h (maximum = + 50 m3/h). This can be very useful to compensate for a lack of pressure.

Pressure plug to help commissioning

The built-in pressure plug makes it easy to measure the pressure using a manometer, then calculate airflow using a table in the installation instructions.

Advanced special versions

The BXC was the first exhaust unit in the world offering the possibility of having built-in CO2 and VOC sensors, for example. These innovations are especially well suited to applications in schools, offices, gymnasiums, mobile homes, etc. A remote control version is also available.

Exhaust unit		BXC2 h	BXC2 p	BXC2 hi	BXC2 hp	BXC2 pd	BXC2 hpd	BXC2 hps
BXC² standard codes (* = in stock)	∅100 ∅125	BXC1900* BXC1907*	BXC1902 BXC1909	BXC1901* BXC1904*	BXC1906	BXC1905* BXC1915*	BXC1903* BXC1908*	BXC1898* BXC1899*
BXC standard codes	∅100 ∅125	BXC211 BXC273	BXC213 BXC276	BXC212 BXC215	BXC272	BXC216 BXC299	BXC214 BXC275	BXC1842/1876
Airflow characteristics
Humidity sensitive		■	–	■	■	–	■	■
Boost airflow		–	■	■	■	■	■	–
Boost airflow activated by switch		–	–	■	–	–	–	–
Boost airflow activated by presence detection		–	■	–	■	■	■	–
Other activation mode		–	–	–	–	–	–	–
Airflow @ 100 Pa (min. – max.) (1)		12 – 80	12 – 80	12 – 80	12 – 80	12 – 80	12 – 80	12 – 80
Airflow ‘+’ – max. available airflow @ 100 Pa (2)	m3/h	130	130	130	130	130	130	130
Airflow @ 100 Pa (min. – max.) 100 diameter	–	–	–	–	–	–	–	■
Acoustics
Sound pressure level Lp @ 2 m, 100 Pa, 80 m3/h, min. airflow ‘+’ setting	dB(A)	28.3
Dn,e,w (C, Ctr) acoustic insulation, RH = 65 %, min. airflow ‘+’ setting	dB	57 (-2 ; -4)	–	57 (-2 ; -4)	57 (-2 ; -4)	–	57 (-2 ; -4)
Power supply
2 x 1.5 V AAA LR03 batteries (not supplied)		–	◊	◊	◊	◊	◊	◊
Buzzer (low battery charge)		–	■	■	■	■	■	■
12 VAC supply with specific transformer (ref. CAL261)		–	◊	◊	◊	◊	◊	◊
230 VAC supply with specific transformer (ref. CAL1228)		–	◊	◊	◊	◊	◊	◊
Characteristics
Colour		white	white	white	white	white	white	white
Material (main)		PS / ABS	PS / ABS	PS / ABS	PS / ABS	PS / ABS	PS / ABS	PS / ABS
Installation
Round air duct compatibility with integrated spigot	mm	ø100	ø100	ø100	ø100	ø100	ø100	ø100
Round air duct compatibility with accessory spigot (3)	mm	ø125	ø125	ø125	ø125	ø125	ø125	ø125
Round air duct compatibility – bracket version (min. – max.)	mm	ø85 – ø90	ø85 – ø90	ø85 – ø90	ø85 – ø90	ø85 – ø90	ø85 – ø90	–
Rectangular air duct compatibility – bracket version (min. – max.)	mm	67 x 60 – 67 – 66	67 x 60 – 67 – 66	67 x 60 – 67 – 66	67 x 60 – 67 – 66	67 x 60 – 67 – 66	67 x 60 – 67 – 66	–
Other functions
60’’delay to activate the presence boost airflow		–	–	–	–	■	■	–
Pressure plug		■	■	■	■	■	■	■

■: standard / included ◊: compatible Note: airflow given for a ø100 duct (1) Default setting. (2) Airflow ‘+’: the airflow can be increased from+10 m3/h to +50 m3/h (6 positions available). This function can be used to adapt to lower pressure or to specific regulations imposing higher airflows. Standard is position 0 (minimum airflow = 12 m3/h @ 100 Pa). (3) Delivered in specific versions or available as accessory (ref. AEA317).

Exhaust unit		BXC2 hrc	BXC2 rc	BFX2	BXC2 s
BXC² standard codes (* = in stock)	∅100 ∅125	BXC1921	BXC1920	BFX1929 BFX1930 *	BXC1919
BXC standard codes	∅100 ∅125	BXC406	BXC404	BXC369 BXC371 *	BXC403
Airflow characteristics
Humidity sensitive		■	–	–	–
Boost airflow		■	■	–	■
Boost airflow activated by switch		–	–	–	◊
Boost airflow activated by presence detection		–	–	–	–
Other activation modes		remote control	remote control	–	BXC co2or voc
Airflow @ 100 Pa (min. – max.) (1)	m3/h	12-80	12-80	12 / 130 (4)	12-80
Airflow ‘+’ – maximum available airflow @ 100 Pa (2)	m3/h	130	130	130	130
Acoustics
Sound pressure level Lp @ 2 m, 100 Pa, 80 m3/h, min. airflow ‘+’ setting	dB(A)	28.3
Dn,e,w (C, Ctr) Acoustic insulation, RH = 65 %, min. airflow ‘+’ setting	dB	57 (-2 ; -4)	–	–	–
Power supply
2 x 1.5 V AAA LR03 batteries (not supplied)		◊	◊	–	■
Buzzer (low battery charge)		■	■	–	■
12 VAC supply with integrated specific transformer (ref. CAL261)		◊	◊	–	■
230 VAC supply with specific transformer (ref. CAL1228)		◊	◊	–	◊
Characteristics
Colour		white	white	white	white
Material (main)		PS / ABS	PS / ABS	PS / ABS	PS / ABS
Installation
Round air duct compatibility with integrated spigot	mm	ø100	ø100	ø100	ø100
Round air duct compatibility with accessory spigot (3)	mm	ø125	ø125	ø125	ø125
Round air duct compatibility – bracket version (min.-max.)	mm	ø85 – ø90	ø85 – ø90	ø85 – ø90	ø85 – ø90
Rectangular air duct compatibility bracket version (min.-max.)	mm	67 x 60 – 67 x 66	67 x 60 – 67 x 66	67 x 60 – 67 x 66	67 x 60 – 67 x 66
Other functions
Other activation code (system indicator)		–	–	–	■
60’’delay to activate the presence boost airflow		–	–	–	–
Fault Indicator		–	–	–	■

AIRFLOW / DIMENSIONS IN MM

airflow dimensions bxc2 exhaust unit mev

IMAGE	CODE	DESIGNATION
	CAF	CAF Stops the propagation of fire cold smokes through ventilation ducts
	CAL261	CAL261 Supply device 12 VAC / 3 VDC (mandatory for BXC connected to 12 VAC supply)
	CAL1228	CAL1228 Supply device 230 VAC / 3 VDC (mandatory for BXC connected to 230 VAC supply)
	33007AL	33007AL Trident plastic sleeve ø125 mm – L 125 mm
	85343AL	85343AL Trident plastic sleeve ø125 mm – ø80 mm – L 125 mm
	FBE475	FBE Aluminium filter box with washable filter for exhaust units
	19429AL	19429AL Phonic ring for exhaust units – ø125 mm
	AEA317	AEA317 Plastic adapter ø125 mm, black, with joint
	BHM429	Phonic plate for exhaust units ø125 mm
	AEA478	Remote control for boost airflox activation
	BXCFS30	Metal fire collar

Previous Next Aereco BXChps Troubleshooting BXC2

Product booklet - FLY727IE_V1

BXC2 hps

Maintenance Instruction_D7205_B

BXC2 hps

Installation instructions _D7204_B

BXCFS30

Metal fire collar - FLY695

Full Scale Metal Web Joist Floor Fire Test BXC

Product booklet – FLY475_V5

BXC

Installation instruction of the CAL1228 - D6106_C

BXC2

Maintenance instruction D4192_B

BXC

Maintenance instruction D4192_B

BXC

Installation instruction D4271_F

BXC

Features, versions and applications booklet – FLY447_V5

BXC

Installation instructions for BFX – D6140_A

CAL 12V for BXC

Installation instructions for CAL 12V for BXC – D4331_E

BXC

Maintenance instructions for BXC with CO2-VOC detection / remote control – D4588_B

BXC

Installation instructions for BXC with CO2-VOC detection / remote control – D4587_C

Compatible ventilation systems:

Mechanical exhaust ventilation – MEV – individual treatment

Mechanical exhaust ventilation – MEV – collective treatment