C63000 Alloy

Trang chủ » C63000 » C63000 Alloy

Có thể bạn quan tâm

  • Home
  • Resources
  • Alloy Properties & Uses
Find suppliers for this alloy C63000 C63000 Aluminum Bronze Wrought BRONZES Copper-Aluminum Alloys (Aluminum Bronzes) true true https://api.copper.org/alloys.xhtml/C63000 Chemical Composition
Elements
Cu(1,2) Sn Zn Fe Ni(3) Al Mn Si
(1) Cu + Sum of Named Elements 99.5% min. (2) Cu value includes Ag. (3) Ni value includes Co.
Min (%) 2.0 4.0 9.0
Max (%) Rem 0.20 0.30 4.0 5.5 11.0 1.5 0.25
Mechanical Properties *
Form Temper Temper Code Tensile Strength(ksi) YS-0.5% Ext(ksi) Elongation(%) Rockwell B scale Shear Strength(ksi) Torsion Modulus(ksi) Izod(ft-lbs) Compressive Strength .1 in. set/in.(ksi) Fatigue Strength**(ksi) Section Size(in) Cold Work(%)
* Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106.
Bar As Hot Extruded M30 90 Typ 50 Typ 15 Typ 96 Typ 3
Drawn and Stress Relieved HR50 100 Typ 60 Typ 15 Typ 96 Typ 2 10
Drawn and Stress Relieved HR50 110 Typ 62 Typ 15 Typ 97 Typ 6.4 Typ 150 Typ 37 Typ 1 10
Rod As Hot Extruded M30 100 Typ 60 Typ 15 Typ 96 Typ 62 Typ 36 Typ 4
Drawn and Stress Relieved HR50 118 Typ 75 Typ 15 Typ 98 Typ 70 Typ 37 Typ 1 10
Drawn and Stress Relieved HR50 115 Typ 65 Typ 18 Typ 96 Typ 69 Typ 38 Typ 2 10
Drawn and Stress Relieved HR50 112 Typ 62 Typ 20 Typ 96 Typ 65 Typ 37 Typ 3 10
Physical Properties
Melting Point - Liquidus°F 1930
Melting Point - Solidus°F 1895
Densitylb/cu in. at 68°F 0.274
Specific Gravity 7.58
Electrical Conductivity% IACS at 68°F 7
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F 22.6
Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) 9
Specific Heat CapacityBtu/ lb /°F at 68°F 0.09
Modulus of Elasticity in Tensionksi 17500
Modulus of Rigidityksi 6400
Fabrication Properties
Technique Suitability
Soldering Not Recommended
Brazing Fair
Oxyacetylene Welding Not Recommended
Gas Shielded Arc Welding Good
Coated Metal Arc Welding Good
Spot Weld Good
Seam Weld Good
Butt Weld Good
Capacity for Being Cold Worked Poor
Capacity for Being Hot Formed Good
Forgeability Rating 75
Machinability Rating 30
Common Fabrication Processes
  • Forging
  • Hot Forming
Thermal Properties
Treatment Minimum* Maximum*
* Temperature is measured in Fahrenheit.
Annealing 1100 1300
Hot Working Temperature 1450 1700
Typical uses
Product Category Product Reason Category Reason
Industrial Aircraft Parts Corrosion Resistance Corrosion Resistance
Aircraft Parts Friction & Wear Properties Wear Resistance
Aircraft Parts Impact Resistance Impact Resistant
Aircraft Parts Mechanical Properties High Strength
Balls Corrosion Resistance Corrosion Resistance
Balls Corrosion Resistance Corrosion Resistance to Chemicals
Balls Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Balls Corrosion Resistance Corrosion Resistance to Numerous Environments
Balls Corrosion Resistance Corrosion Resistance to Salt Water
Balls Friction & Wear Properties Galling Resistance
Balls Friction & Wear Properties Wear Resistance
Balls Mechanical Properties High Strength
Bearings Corrosion Resistance Corrosion Resistance
Bearings Friction & Wear Properties Resistant to Abrasive Wear
Bearings Friction & Wear Properties Resistant to Adhesive Wear Toughness
Bearings Mechanical Properties Heavy Load Strength
Bushings Corrosion Resistance Corrosion Resistance
Bushings Friction & Wear Properties Resistant to Abrasive Wear
Bushings Friction & Wear Properties Resistant to Adhesive Wear Toughness
Bushings Mechanical Properties Heavy Load Strength
Cams Corrosion Resistance Corrosion Resistance
Cams Corrosion Resistance Corrosion Resistance to Chemicals
Cams Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Cams Corrosion Resistance Corrosion Resistance to Numerous Environments
Cams Corrosion Resistance Corrosion Resistance to Salt Water
Cams Friction & Wear Properties Galling Resistance
Cams Friction & Wear Properties Wear Resistance
Cams Mechanical Properties High Strength
Condenser Tube for Power Stations and Desalting Units Corrosion Resistance Corrosion Resistance
Condenser Tube for Power Stations and Desalting Units Corrosion Resistance Corrosion Resistance to Chemicals
Condenser Tube for Power Stations and Desalting Units Corrosion Resistance Corrosion Resistance to Fresh Water
Condenser Tube for Power Stations and Desalting Units Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Condenser Tube for Power Stations and Desalting Units Corrosion Resistance Corrosion Resistance to Numerous Environments
Condenser Tube for Power Stations and Desalting Units Corrosion Resistance Corrosion Resistance to Salt Water
Condenser Tube for Power Stations and Desalting Units Friction & Wear Properties Wear Resistance
Condenser Tube for Power Stations and Desalting Units Mechanical Properties High Strength
Corrosion Resistant Articles Corrosion Resistance Corrosion Resistance
Corrosion Resistant Articles Corrosion Resistance Corrosion Resistance to Chemicals
Corrosion Resistant Articles Corrosion Resistance Corrosion Resistance to Fresh Water
Corrosion Resistant Articles Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Corrosion Resistant Articles Corrosion Resistance Corrosion Resistance to Numerous Environments
Corrosion Resistant Articles Corrosion Resistance Corrosion Resistance to Salt Water
Corrosion Resistant Articles Mechanical Properties High Strength
Gears Corrosion Resistance Corrosion Resistance
Gears Corrosion Resistance Corrosion Resistance to Chemicals
Gears Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Gears Corrosion Resistance Corrosion Resistance to Numerous Environments
Gears Corrosion Resistance Corrosion Resistance to Salt Water
Gears Friction & Wear Properties Galling Resistance
Gears Friction & Wear Properties Wear Resistance
Gears Mechanical Properties High Strength
Heat Exchanger Flanges Conductivity (Thermal) Thermal Conductivity
Heat Exchanger Flanges Corrosion Resistance Corrosion Resistance
Heat Exchanger Flanges Welding Characteristics Weldability
Heat Exchanger Headers Conductivity (Thermal) Thermal Conductivity
Heat Exchanger Headers Corrosion Resistance Corrosion Resistance
Heat Exchanger Headers Welding Characteristics Weldability
Hydraulic Bushings for Earth Moving Equipment Corrosion Resistance Corrosion Resistance
Hydraulic Bushings for Earth Moving Equipment Friction & Wear Properties Resistant to Abrasive Wear
Hydraulic Bushings for Earth Moving Equipment Impact Resistance Impact Resistant
Hydraulic Bushings for Earth Moving Equipment Mechanical Properties High Strength
Plunger Tips Corrosion Resistance Corrosion Resistance
Plunger Tips Corrosion Resistance Corrosion Resistance to Chemicals
Plunger Tips Corrosion Resistance Corrosion Resistance to Fresh Water
Plunger Tips Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Plunger Tips Corrosion Resistance Corrosion Resistance to Numerous Environments
Plunger Tips Corrosion Resistance Corrosion Resistance to Salt Water
Plunger Tips Friction & Wear Properties Wear Resistance
Plunger Tips Mechanical Properties High Strength
Pump Parts Corrosion Resistance Corrosion Resistance
Pump Parts Corrosion Resistance Corrosion Resistance to Chemicals
Pump Parts Corrosion Resistance Corrosion Resistance to Fresh Water
Pump Parts Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Pump Parts Corrosion Resistance Corrosion Resistance to Numerous Environments
Pump Parts Friction & Wear Properties Wear Resistance
Pump Parts Mechanical Properties High Strength
Pump Shafts Corrosion Resistance Corrosion Resistance
Pump Shafts Corrosion Resistance Corrosion Resistance to Chemicals
Pump Shafts Corrosion Resistance Corrosion Resistance to Fresh Water
Pump Shafts Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Pump Shafts Corrosion Resistance Corrosion Resistance to Numerous Environments
Pump Shafts Corrosion Resistance Corrosion Resistance to Salt Water
Pump Shafts Friction & Wear Properties Wear Resistance
Pump Shafts Mechanical Properties High Strength
Shafting Corrosion Resistance Corrosion Resistance
Shafting Corrosion Resistance Corrosion Resistance to Chemicals
Shafting Corrosion Resistance Corrosion Resistance to Fresh Water
Shafting Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Shafting Corrosion Resistance Corrosion Resistance to Numerous Environments
Shafting Corrosion Resistance Corrosion Resistance to Salt Water
Shafting Friction & Wear Properties Wear Resistance
Shafting Mechanical Properties High Strength
Structural Members Corrosion Resistance Corrosion Resistance
Structural Members Corrosion Resistance Corrosion Resistance to Chemicals
Structural Members Corrosion Resistance Corrosion Resistance to Fresh Water
Structural Members Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Structural Members Corrosion Resistance Corrosion Resistance to Numerous Environments
Structural Members Corrosion Resistance Corrosion Resistance to Salt Water
Structural Members Mechanical Properties High Strength
Tanks Conductivity (Electrical) Electrical Conductivity
Tanks Corrosion Resistance Corrosion Resistance to Chemicals
Tanks Mechanical Properties High Strength
Tanks Welding Characteristics Weldability
Valve Balls Corrosion Resistance Cavitation Corrosion Resistance
Valve Balls Corrosion Resistance Erosion Corrosion Resistance
Valve Balls Corrosion Resistance Pitting Corrosion Resistance
Valve Balls Corrosion Resistance Resistance to Corrosion by a broad variety of Corrosive Media
Valve Balls Finishing Characteristics Retains Surface Finish
Valve Balls Friction & Wear Properties Wear Resistance
Valve Guides Corrosion Resistance Corrosion Resistance
Valve Guides Corrosion Resistance Corrosion Resistance to Chemicals
Valve Guides Corrosion Resistance Corrosion Resistance to Fresh Water
Valve Guides Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Valve Guides Corrosion Resistance Corrosion Resistance to Numerous Environments
Valve Guides Corrosion Resistance Corrosion Resistance to Salt Water
Valve Guides Friction & Wear Properties Wear Resistance
Valve Guides Mechanical Properties High Strength
Valve Seats Corrosion Resistance Corrosion Resistance
Valve Seats Corrosion Resistance Corrosion Resistance to Chemicals
Valve Seats Corrosion Resistance Corrosion Resistance to Fresh Water
Valve Seats Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Valve Seats Corrosion Resistance Corrosion Resistance to Numerous Environments
Valve Seats Corrosion Resistance Corrosion Resistance to Salt Water
Valve Seats Friction & Wear Properties Wear Resistance
Valve Seats Mechanical Properties High Strength
Welded Piping Systems Corrosion Resistance Corrosion Resistance
Welded Piping Systems Mechanical Properties High Strength
Welded Piping Systems Welding Characteristics Weldability
Marine Bolts Corrosion Resistance Corrosion Resistance
Bolts Corrosion Resistance Corrosion Resistance to Fresh Water
Bolts Corrosion Resistance Corrosion Resistance to Numerous Environments
Bolts Corrosion Resistance Corrosion Resistance to Salt Water
Bolts Impact Resistance Impact Resistant
Bolts Mechanical Properties High Strength
Nuts Corrosion Resistance Corrosion Resistance
Nuts Corrosion Resistance Corrosion Resistance to Fresh Water
Nuts Corrosion Resistance Corrosion Resistance to Numerous Environments
Nuts Corrosion Resistance Corrosion Resistance to Salt Water
Nuts Mechanical Properties High Strength
Propellers Corrosion Resistance Corrosion Resistance
Propellers Corrosion Resistance Corrosion Resistance to Salt Water
Propellers Friction & Wear Properties Wear Resistance
Propellers Mechanical Properties High Strength
Pump Parts Corrosion Resistance Corrosion Resistance
Pump Parts Corrosion Resistance Corrosion Resistance to Salt Water
Pump Parts Friction & Wear Properties Wear Resistance
Pump Parts Mechanical Properties High Strength
Ship Propellers Corrosion Resistance Cavitation Corrosion Resistance
Ship Propellers Corrosion Resistance Corrosion Resistance to Salt Water
Ship Propellers Mechanical Properties High Strength
Ship Propellers Welding Characteristics Weldability
Plumbing Faucets Corrosion Resistance Corrosion Resistance
Faucets Mechanical Properties High Strength
Applicable Specifications
Form Specific Sub-Form Application System Standard Description
Bar SAE J461 WROUGHT AND CAST COPPER ALLOYS
SAE J463 WROUGHT COPPER AND COPPER ALLOYS
ASTM B124/B124M COPPER AND COPPER-ALLOY FORGING ROD, BAR AND SHAPES
AMS 4640 ALUMINUM BRONZE BARS, RODS, SHAPES, TUBES, AND FORGINGS
FEDERAL QQ-C-450 COPPER-ALUMINUM ALLOY (ALUMINUM BRONZE, PLATE, SHEET, STRIP, AND BAR)
Bolts ASTM F468 NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE
Die Forgings AMS 4640 ALUMINUM BRONZE BARS, RODS, SHAPES, TUBES, AND FORGINGS
Forgings MILITARY MIL-B-16166 BRONZE, ALUMINUM, FORGINGS, HEAT TREATED
Forgings, Die (Hot Pressed) ASME SB283 COPPER AND COPPER ALLOY DIE FORGINGS (HOT PRESSED)
ASTM B283/B283M COPPER AND COPPER ALLOY DIE FORGINGS (HOT PRESSED)
Nuts ASTM F467 NONFERROUS NUTS FOR GENERAL USE
Plate FEDERAL QQ-C-450 COPPER-ALUMINUM ALLOY (ALUMINUM BRONZE, PLATE, SHEET, STRIP, AND BAR)
Plate & Sheet for Pressure Vessels, Condensers & Heat Exchangers ASTM B171/B171M COPPER ALLOY CONDENSER TUBE PLATES
for Pressure Vessels, Condensers & Heat Exchangers Condenser Tube ASME SB171 COPPER ALLOY CONDENSER TUBE PLATES
Rod AMS 4640 ALUMINUM BRONZE BARS, RODS, SHAPES, TUBES, AND FORGINGS
SAE J463 WROUGHT COPPER AND COPPER ALLOYS
Forgings ASTM B124/B124M COPPER AND COPPER-ALLOY FORGING ROD, BAR AND SHAPES
SAE J461 WROUGHT AND CAST COPPER ALLOYS
Rod, Bar & Shapes Aluminum Bronze ASTM B150/B150M ALUMINUM BRONZE ROD, BAR AND SHAPES
Aluminum Bronze ASME SB150 ALUMINUM BRONZE ROD, BAR, AND SHAPES
Screws ASTM F468 NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE
Shapes SAE J463 WROUGHT COPPER AND COPPER ALLOYS
SAE J461 WROUGHT AND CAST COPPER ALLOYS
ASTM B124/B124M COPPER AND COPPER-ALLOY FORGING ROD, BAR AND SHAPES
AMS 4640 ALUMINUM BRONZE BARS, RODS, SHAPES, TUBES, AND FORGINGS
Sheet FEDERAL QQ-C-450 COPPER-ALUMINUM ALLOY (ALUMINUM BRONZE, PLATE, SHEET, STRIP, AND BAR)
Strip FEDERAL QQ-C-450 COPPER-ALUMINUM ALLOY (ALUMINUM BRONZE, PLATE, SHEET, STRIP, AND BAR)
Tube AMS 4640 ALUMINUM BRONZE BARS, RODS, SHAPES, TUBES, AND FORGINGS
Corrosion Properties

No Corrosion Properties Available.

Từ khóa » C63000