CDS SPS51-187/CMK-R - JST

Trang chủ » Cmk 187 » CDS SPS51-187/CMK-R - JST

Có thể bạn quan tâm

  • Product Catalogue
    • PCB Connectors / Tabs
      • Board to Board Connectors
      • Card Edge Connectors
      • FFC/FPC Connectors
      • PC/Memory Card Connectors
      • Ribbon Cable Connectors
      • Wire to Board Connectors (Crimp Type)
      • Wire to Board Connectors (IDC Type)
      • Memory Card Connectors
      • Headers, Pins and Wrap Posts
      • Jumper Connectors
      • Compression & Battery Type Connectors
      • Antenna and Miniature Co-axial Connectors
      • PCB Tab Terminals
    • Application Tooling
      • Extraction / Insertion Tools
      • Fully Automatic Crimping Machines
      • Fully Automatic IDC Machines
      • Hand Press (For ID Connectors)
      • Wire Processing Accessories
      • Hand Tools (For Crimp Contacts)
      • Hydraulic Tools (For Closed Barrel Terminals)
      • Pneumatic Press (For ID Connectors)
      • Pneumatic Tools (For Closed Barrel Terminals)
      • Crimping Press (For JST standard applicators)
      • Applicators (JST Standard)
      • Pneumatic Press (For TOR Terminals)
      • Applicators (Industry Standard)
      • Hand Tools (For ID Connectors)
      • Hand Tools (For Non-Insulated Terminals)
      • Hand Tools (For Insulated Terminals)
      • Hand Tools (For Chain Terminals)
      • Applicators (For ID Connectors)
    • Crimp Terminals/Splices
      • Bullet Terminal
      • Button Contact
      • Cluster Pin Terminal
      • Cluster Socket
      • Fork Tongue Terminal
      • Ignition Connector
      • Magnet Wire Connector
      • Splice Terminal (Piercing Type)
      • Positive Lock Connector
      • Ring Tongue Terminal
      • Splice Terminal
      • Splice (For Heater Wires)
      • TAB-IN Terminal
      • TAB-IN-TAB Terminal
      • TAB-ON Terminal (Flag)
      • TAB-ON Terminal (Piggyback)
      • TAB-ON Terminal (Straight)
      • TAB-ON-TAB Terminal
      • Microswitch Connector
      • RAST Connector System
    • DIN Solderless Terminals/Splices
      • A - Ring Tongue Terminal
      • B - Spade Tongue Terminal
      • C - Parallel Splice
      • D - Butt Splice
      • E - Pin Terminal
      • F - Insulated Disconnect Terminal
    • I/O Connectors
      • D Subminiature Connectors
      • I/O (Input/Output) Connectors
      • Mini-DIN Connectors
      • USB Connectors
      • IEEE 1394 Connectors
      • Combination Connectors
      • Modular Jack Connectors
      • AV Connectors
    • Solderless Splices
      • Butt Splice
      • Parallel Splice
      • Butt (Window Type) Splice
      • Oval Type Splice
      • Copper Tubular Splice
      • Closed-End Splice
    • Solderless Terminals
      • Ring Terminals
      • Fork Tongue Terminal
      • Fork Tongue (Hook) Terminal
      • Spade Tongue Terminal
      • Locking Spade Terminal
      • Flanged Spade Tongue Terminal
      • Bullet Terminal
      • Copper Tubular Lug Terminal
      • Knife Disconnect Terminal
      • Lipped Blade Terminal
      • Pin Terminal
      • Quick Disconnect Terminal
      • Ring Tongue (Double Hole) Terminal
      • Ring Tongue (Flag) Terminal
      • Blade Terminal
      • Wire End Ferrules
    • Wire to Wire Connectors
      • Waterproof Connectors
      • Panel Mounted Connectors
      • High Frequency Connectors
      • Hybrid (I/O) Type Connectors
      • General Form Connectors
    • Earth Straps
      • A - Shunt Wires (1 Hole Terminal)
      • B - Shunt Wires (2 Hole Terminal)
      • C - Shunt Wires (4 Hole Terminal)
      • D - Shunt Wires (6 Hole Terminal)
      • E - Shunt Wires (9 Hole Terminal)
      • F - Shunt Wires (5 Hole Terminal)
    • Tape-on Terminals/Splices
      • A - Ring Tongue Terminal
      • B - Spade Tongue Terminal
      • C - Flanged Spade Tongue Terminal
      • D - Closed-End Splice
      • E - Quick Disconnect Terminal
    • Automotive Connectors
      • Wire to Board Crimp style Connectors
      • FFC/FPC Connectors
      • Wire to Wire Connectors
      • High Frequency Connectors
      • Waterproof Connectors
      • Squib Connectors
      • Interface Connectors
      • Board to Board Connectors
      • High Voltage Connector
    • Factory Automation Connectors
      • Wire to Board Connectors (Crimp Type)
      • Wire to Wire Connectors
      • I/O (Input/Output) Connectors
    • Insulation Sleeves - OBSOLETE
      • Soft Insulation Sleeves - OBSOLETE
    • Domestic Appliance
      • Bullet Terminal
      • Button Contact
      • Cluster Pin Terminal
      • Cluster Socket
      • Fork Tongue Terminal
      • Ignition Connector
      • Magnet Wire Connector
      • Microswitch Connector
      • Positive Lock Connector
      • RAST Connector System
      • Ring Tongue Terminal
      • Splice (For Heater Wires)
      • Splice Terminal
      • Splice Terminal (Piercing Type)
      • TAB-IN Terminal
      • TAB-IN-TAB Terminal
      • TAB-ON Terminal (Flag)
      • TAB-ON Terminal (Piggyback)
      • TAB-ON Terminal (Straight)
      • TAB-ON-TAB Terminal
      • General Form Connectors
      • Panel Mounted Connectors
      • Waterproof Connectors
  • Services
    • Sales Support
    • Product Technical Support
    • Design and Development
    • Tooling Technical Support
    • Laboratory and Testing
    • Warehouse and Logistics
  • About
    • Our Branches worldwide
    • Job Opportunities
  • Contact

Quality Management

We have an organisational structure that is accredited to IATF16949 ‘Quality Management System’. Find out more Search Log in / register GB INBEZA JST - The Quality Connection Log in register Sample Cart Home » Products » Application Tooling » Applicators (Industry Standard) CMK-R-1_79 CDS SPS51-187/CMK-R Industry Standard (Semi Automatic) Applicator for SPS-51T-187 Enquire about this product
  • Features
  • Downloads

The JST Industry standard applicators have been designed to fit into most Industry standard presses.When installed in a press they provide the most efficient method of applying chain terminals to a pre-stripped wire.Due to the high quality durable design, in addition to being used on semi-automatic machinery these applicators are also suitable for high volume operation on fully automatic machines.

Specifications:

  • Compatible with most Industry Standard Presses
  • Available to suit all JST strip terminals
  • Standard applicator mounting positions
  • Quick crimp height adjustment for conductor and insulation barrels, using dials
  • Heavy duty and durable design
  • Post-feed or pre-feed cams available

Dimensions:

  • Weight: 6Kg
  • Shut Height 135.78mm
  • 40mm stroke

Other:

  • Additional spare parts available for immediate dispatch
  • Free training available on request

JST offer a complete range of applicators to suit all JST strip terminal products for rental or outright purchase, for rental terms and conditions please contact our Technical Services Dept.

Full Technical Drawings

If you require full technical drawings or any other in-depth information about this product series, please contact us using the link below.

Contact Us

Additional Information

This product series has some additional information related to it that you can download from the list below.

CMK-R Operation Manual Need help? +44(0)1986874131 [email protected] JST Home Product Catalogue Service About Contact Tweets by @JSTConnectors © 2015 JST Sitemap Terms & Conditions Privacy Policy

Từ khóa » Cmk 187