CES-AR-C01-CH-SA (Order No. 098942) - Euchner
HomeProductsTransponder-coded safety switches without guard lockingCES-AR safety switchCES-AR-C01-CH-SA CES-AR-C01-CH-SA (Order no. 098942) Choose content Description Choose content Technical data Components Accessories Choose content Ordering data Download as PDF Safety switch CES-AR-C01-..., RFID, plug connector(s) M12
- Multicode
- Monitoring output door position OUT
- Plug connector M12, 8-pin
Description Technical data Accessories Downloads CAD/eCAD Ordering data Description
Approach direction and installation position
1 active face, adjustable in 5 directions
Multicode evaluation
The system checks whether the actuator type is one that can be recognized by the system (multicode evaluation). The system has a low coding level. Every suitable actuator is recognized by the switch.
Safety characteristics
Thanks to two redundant safety outputs (semiconductor outputs) with internal monitoring, the device is suitable for:
- Category 4 /PL e according to EN 13849-1
- SIL 3 according to EN IEC 62061 Table 4
The OSSD outputs used check their function for short circuits and short circuits with test pulses.
LED indicator
STATE | Status LED |
DIA | Diagnostics LED |
Typical actuating ranges
With actuators CES-A-BBA and CES-A-BCA
For a side approach direction for the actuator and safety switch, a minimum distance of s = 4 mm must be maintained so that the actuating range of the side lobes is not entered.
With actuator CES-A-BPA
For a side approach direction for the actuator and safety switch, a minimum distance of s = 6 mm must be maintained so that the actuating range of the side lobes is not entered.
Attention:
The actuating range may vary depending on the actuator, substrate material and installation situation. Further actuating ranges can be found in the operating instructions.
Plug connector(s) adjusted C01
Plug connector(s) adjustable in 6 orientations.
Terminal assignment
| Plug connector (view of connection side) | Pin | Designation | Function | Connecting cable conductor coloring |
|---|---|---|---|---|
 | 1 | IB | Enable input, channel B | WH |
| 2 | UB | Electronics operating voltage, 24 V DC | BN | |
| 3 | OA | Safety output, channel A | GN | |
| 4 | OB | Safety output, channel B | YE | |
| 5 | OUT | Monitoring output | GY | |
| 6 | IA | Enable input for channel A | PK | |
| 7 | 0 V | Weight 0 V DC | BU | |
| 8 | RST | Reset input | RD |
Accessories required
Actuator is not included.
Connection examples
Technical data
Approvals
Workspace
| Repeat accuracy R | |
| according to EN 60947-5-2 | 10 % |
Electrical connection values
| Fuse | |
| external (operating voltage) | 0.25 ... 8 A |
| Rated insulation voltage Ui | 75 V (Tested up to 75 V by employers' liability insurance association) |
| Rated impulse voltage Uimp | 1.5 kV |
| Operating voltage DC | |
| UB | 24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple
Từ khóa » Ch Sa
Copyright © 2022 | Thiết Kế Truyền Hình Cáp Sông Thu |