Chống Sét Van Siemens, Chống Sét Van 45kV 10kA Sử Dụng Trong ...

Chống sét Van Siemens, Chống sét van 45kV 10kA sử dụng trong lưới điện 35kV (38,5kV upto 40,5kV) trung tính cách ly

Download catalogue chống sét van cho mạng lưới phân phối điện trung thế Siemens

Download catalogue chống sét van cho mạng lưới phân phối điện trung thế Siemens

Download catalogue chống sét van cho mạng lưới phân phối điện trung thế Siemens

Download catalogue chống sét van cho mạng lưới phân phối điện trung thế Siemens

1.  home  
2. Offerings   
3. Power Transmission   
4. Transmission Products   
5. Surge arresters   
6. Medium-voltage arresters for distribution networks

Medium-voltage arresters for distribution networks

Our surge arresters for medium-voltage applications offer reliable overvoltage protection for medium-voltage distribution networks and components for applications up to 72.5 kV.

Contact the customer service

Product overview

Overview of our medium-voltage arresters for distribution networks

We offer a wide range of product families for all types of requirements.

It is important to choose the surge arrester based on the application and equipment to be protected:Surge arresters for distribution networksSiemens 3EK distribution class surge arresters are ideally suited for the reliable protection of transformers, circuit breakers, medium-voltage switchgear and distribution lines.

Surge arresters with high energy absorption capabilitiesIn addition to typical distribution class surge arresters, Siemens offers the 3EJ surge arrester product family with higher energy absorption capabilities in combination with a low protection level. The 3EJ medium-voltage surge arresters protect generators, motors, arc furnaces, dry-type transformers, airfield lighting systems, cable sheathing and converters for drives from overvoltage.Special applicationsSiemens offers the 3EQ0 product series for applications that require a surge arrester with a silicone rubber housing and directional pressure relief. 

Siemens also offers the 3EP-G porcelain housed surge arresters with short-circuit current capability up to 300 kA for the overvoltage protection of generators and motors.

Product families

SURGE ARRESTERS FOR DISTRIBUTION NETWORKS

3EK4 and 3EK7 silicone rubber surge arresters with Cage Design™ de 1 of 1

Siemens 3EK4 and 3EK7 silicone rubber surge arresters with cage design effectively protect medium-voltage distribution networks from overvoltage.

Siemens 3EK4 and 3EK7 cage design surge arresters are ideally suited to provide reliable protection for:

• Transformers
• Circuit breakers
• Medium-voltage switchgear
• Medium-voltage distribution networks

The cage, made of fiberglass-reinforced plastic (FRP) rods, provides a rigid, reinforced structure ensuring high mechanical strength.

The silicone rubber housing is directly molded onto the metal oxide (MO) blocks and the surrounding cage made of FRP rods. This creates a reliable seal that prevents moisture ingress and partial discharges.The MO resistors are not surrounded by a rigid mechanical coating, which is why no critical increases in pressure can occur in the surge arrester in the extremely rare event of an overload. The arc can escape directly through the soft silicone housing without damaging the mechanical structure. No internal parts are ejected in the process. The innovative Siemens cage design is very secure.The silicone rubber is highly hydrophobic. This keeps any conductive moisture from forming on the surface, and dirt deposits are rendered harmless as a result of the hydrophobic transfer. Silicone is highly fire-retardant and self-extinguishing in the event of fire. These properties ensure the reliable, maintenance-free operation of 3EK surge arresters.Siemens offers two types of products for use in distribution networks that differ in terms of mechanical strength:

• 3EK4 – for rated voltages up to 36 kV, high mechanical strength
• 3EK7 – for rated voltages up to 60 kV, very high mechanical strength

The proven type 3EK7 surge arrester is also available for indoor use. The 3EK7 surge arrester for indoor use is a cage design surge arrester that offers the same features as the version for outdoor use.

Technical data

Slide 1 of 1

•  Download table in PDF format

3EK8 silicone surge arresters with wrap design Slide 1 of 1

Siemens 3EK8 silicone rubber surge arresters with wrap design effectively protect medium-voltage distribution networks from overvoltage.

Siemens 3EK8 wrap design surge arresters are ideally suited to provide reliable protection for:

• Transformers
• Circuit breakers
• Medium-voltage switchgear
• Medium-voltage distribution networks

The silicone rubber housing is directly molded onto the metal oxide (MO) blocks. This creates a reliable seal that prevents moisture ingress and partial discharges.

In the extremely rare event of an overload, arcing cannot result in a buildup of critical internal pressure, since the MO resistors are not enclosed in a sealed rigid mechanical shell. The arc can escape directly through the fiberglass wrap and the soft silicone housing without damaging the mechanical structure. No internal parts are ejected in the process.

 

High-temperature vulcanized (HTV) silicone rubber is highly hydrophobic. This keeps any conductive moisture from forming on the surface, and dirt deposits are rendered harmless as a result of the hydrophobic transfer. Silicone is highly fire-retardant and self-extinguishing in the event of fire. These properties ensure the reliable, maintenance-free operation of 3EK8 surge arresters.

 

3EK8 surge arresters can be delivered with the same accessories like 3EK7 surge arresters.

Slide 1 of 1 Play Video

Technical data

 

		3EK8
Nominal system voltae	kV	40.5
Maximum rated voltage	kV	36
Maximum continuous operating voltage	kV	29
Designation (IEEE)		A
Nominal discharge current	kA	10
Thermal charge transfer rating	C	0.4
Charge transfer rating	C	3.0
Rated short-circuit current	kA	20
High current impulse	kA	100

  Arc Protection System (APS) Slide 1 of 1

If excess voltage exceeds the energy absorption capacity of a surge arrester, the metal oxide blocks can be damaged and cause the surge arrester to fail. This causes fault current, and an arc forms at both end fittings of the surge arrester. Melted metal can fall to the ground and cause a fire.

This is why type 3EK medium-voltage arresters for distribution networks can be equipped with an Arc Protection System (APS), which is installed at both ends of the surge arrester. The APS consists of electrodes nested within each other, which create the power to rotate the arc around the surge arrester housing. This reduces the formation of molten material at the end fittings, dramatically decreasing the risk of forest fires.

The APS is available for type 3EK4 and 3EK7 surge arresters. We recommend using surge arresters with APS in especially hot and dry regions with an increased risk of forest fires – like the western United States and South Australia.The surge arresters can also be equipped with a visible failure message. A red display appears at the bottom end of the surge arrester in the event of a malfunction.Siemens medium-voltage arresters for distribution networks with APS meet all of the requirements of the Cal Fire Power Line Fire Prevention Field Guide (2008), and have successfully passed all necessary tests. Siemens surge arresters with APS also have a much lower rate of sparks than surge arresters without APS.

Download product overview

SURGE ARRESTERS WITH HIGH ENERGY ABSORPTION CAPABILITIES

Siemens 3EJ silicone rubber surge arresters with Cage Design™

Siemens 3EJ silicone surge arresters with cage design are ideally suited for reliable protection against overvoltages in medium-voltage distribution networks.Siemens 3EJ cage design surge arresters are ideally suited to provide reliable protection for:

• Generators
• Motors
• Arc furnaces
• Dry-type transformers
• Airfield lighting systems
• Cable sheathing
• Capacitors and capacitor banks
• Converters for drives

The cage, made of fiberglass-reinforced plastic (FRP) rods, provides a rigid, reinforced structure ensuring high mechanical strength.The silicone rubber housing is directly molded onto the metal oxide (MO) blocks and the surrounding cage made of FRP rods. This creates a reliable seal that prevents moisture ingress and partial discharges.

 

The MO resistors are not surrounded by a rigid mechanical coating, which is why no critical increases in pressure can occur in the surge arrester in the extremely rare event of an overload. The arc can escape directly through the soft silicone housing without damaging the mechanical structure. No internal parts are ejected in the process. The innovative Siemens cage design is very secure.

The silicone rubber is highly hydrophobic. This keeps any conductive moisture from forming on the surface, and dirt deposits are rendered harmless as a result of the hydrophobic transfer. Silicone is highly fire-retardant and self-extinguishing in the event of fire.  These properties ensure the reliable, maintenance-free operation of 3EJ surge arresters.

Siemens offers five product types for applications with high energy absorption capacities that vary in terms of the protection level:

• 3EJ2 – for rated voltages up to 54 kV, medium energy absorption capability
• 3EJ3 – for rated voltages up to 54 kV, high energy absorption capability
• 3EJ4 – for rated voltages up to 54 kV, very high energy absorption capability
• 3EJ0 – for rated voltages up to 15 kV, very low protection level, for protection against overvoltages
• 3EJ9 – for rated voltages up to 15 kV, very low residual voltage, for protection against overvoltages

The proven type 3EJ4 surge arrester is also available for indoor use. The 3EJ4 surge arrester for indoor use is a cage design surge arrester that offers the same features as the version for outdoor use.The 3EJ0 and 3EJ9 surge arresters are optimized with an extremely low protection level for protection against overvoltages. The type 3EJ0 is used in cable networks with up to 15 kV. Type 3EJ9 surge arresters should be used for power plants and extensive cable networks. These have a higher energy absorption capacity and a better protection level.

Technical data

Slide 1 of 1

•  Download table in PDF format

Download product overview

SPECIAL APPLICATIONS

3EQ0 surge arresters with silicone housing, composite hollow core design Slide 1 of 1