Cleaning And Maintenance; Warranty And Repair - Airpress H 215-6 ...

× Lesezeichen wurde hinzugefügt × Zu meinen Handbüchern hinzugefügt

1. Anleitungen
2. Marken
3. Airpress Anleitungen
4. Kompressoren
5. H 215-6
6. Betriebsanleitung (übersetzung der originalanleitung

Cleaning And Maintenance; Warranty And Repair - Airpress H 215-6 Betriebsanleitung (Übersetzung Der Originalanleitung Oil free air compressor Vorschau ausblenden 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

• Seite von 16 Vorwärts / 16
• Inhalt
• Inhaltsverzeichnis
• Lesezeichen

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

• DE
• EN
• FR
• NL
• PL
• RU
• Mehr

Verfügbare Sprachen

• DEUTSCH, seite 8
• ENGLISH, page 4
• FRANÇAIS, page 6
• DUTCH, pagina 10
• POLSKI, strona 12
• РУССКИЙ, страница 14

EN Instruction manual for owner's use (Translation of the original instructions) of the pneumatic tool to be used are compatible with the pressure set on the pressure regulator and with the amount of air supplied by the compressor. • Always pull out the plug and drain the receiver once you have completed your work.

4. CLEANING AND MAINTENANCE

WARNING! Pull the power plug before doing any cleaning and maintenance work on the appliance. WARNING! Wait until the compressor has completely cooled down. Risk of burns! WARNING! Always depressurize the tank before carrying out any cleaning and mainte- nance work. Never clean the machine and its components with solvents, flammable or toxic liquids. Us only a damp cloth making sure you have unplugged the compressor from the current outlet. After approx. 2 hours of use, the condensate that has formed must be drained from the receiver. First of all, vent all the air using the accessory connected, as described above. The condensation water must be drained off each day by opening the drain valve (ref. 11 - Fig. 9) (on the bottom of the pressure vessel). WARNING! If the water that condenses is not drained, it may corrode the receiver, reducing its capacity and impairing safety. As it is a contaminating product, condensate must be DISPOSED of in accordan- ce with laws on protection of the environment and current legislation. 5. STORAGE Pull the mains plug out of the socket and ventilate the appliance and all connec- ted pneumatic tools. Switch off the compressor and make sure that it is secured in such a way that it cannot be started up again by any unauthorized person. 6. DISPOSAL The compressor must be disposed in conformity with the methods provided for by local regulations.

7. WARRANTY AND REPAIR

In the event of defective goods or requirements for spare parts, kindly contact the sales point where you made your purchase. 8. POSSIBLE FAULTS AND RELATED PERMITTED REMEDIES FAULT Reduction of performance. Excessive performance Frequent start-up. request, check for any Low pressure values. leaks from the couplings and/or pipes. Intake filter may be clogged. The compressor stops and Tripping of the thermal restarts automatically after a cutout due to overheating of few minutes. the motor. After a few attempts to Tripping of the thermal cuto- restart, the compressor ut due to overheating of the stops. motor (removal of the plug with the compressor running, low power voltage). The compressor does not Irregular functioning of the stop and the safety valve is compressor or breakage of tripped. the pressure switch. Any other type of operation must be carried out by authorized Service Centers, requesting original parts. Tampering with the machine may impair its safety and in any case make the warranty null and void. CAUSE REMEDY Replace the seals of the fitting, clean or replace the filter. Clean the air ducts in the conveyor. Ventilate the work area. Activate the on/off switch. Ventilate the work area. Wait a few minutes. The compres- sor will restart independen- tly. Remove any power cable extensions. Remove the plug and contact the Service Center. 5 Inhaltsverzeichnis Vorherige Seite Nächste Seite

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9

Werbung

Inhaltsverzeichnis

Verwandte Anleitungen für Airpress H 215-6

• Kompressoren Airpress LMVO 40-250 Betriebsanleitung (21 Seiten)
• Kompressoren Airpress LM 100-400 Bedienungsanleitung (7 Seiten)

• Kompressoren Airpress L6-95 SILENT Gebrauchsanleitung (18 Seiten)
• Kompressoren Airpress 12V30 Gebrauchsanleitung (25 Seiten)

Verwandte Inhalte für Airpress H 215-6

L6-95 SILENT Maintenance Airpress L6-95 SILENT

Inhaltsverzeichnis

Drucken

Seite 5 drucken Dokument drucken (16 Seiten)

Lesezeichen umbenennen

Abbrechen

Lesezeichen löschen?

Abbrechen Löschen

Möchten Sie es aus Ihren Handbüchern löschen?

Abbrechen Löschen

Anmelden

Anmelden ODER Mit Facebook anmelden Mit Google anmelden Noch keinen Account? Registrieren Sie sich jetzt! Passwort vergessen?

Anleitung hochladen

Von PC hochladen Von URL hochladen Vielen Dank für Ihre Hilfe!