Comparison | SilentStepStick - Watterott Electronic

Trang chủ » Tmc2208 Vs Tmc2209 Vs Tmc2225 » Comparison | SilentStepStick - Watterott Electronic

Có thể bạn quan tâm

DeutschEnglishFrançais
  • Knowledge-Base
  • Arduino
  • Arduino Shields
  • Raspberry Pi
  • Raspberry Pi HATs
  • Boards / Breakouts
  • Bee-Modules
  • Sensors
  • 3D-Printer
  • FabScan
  • Learn to Solder
  • senseBox
  • SilentStepStick
    • Comparison
    • Getting Started
    • Frequently Asked Questions
    • Pinout + Powering
    • Protector
    • Heat Sink
    • Configurator for TMC220x
    • Tester
    • Reviews + Tests
  • PV / Solar
  • Retired Products
Home> SilentStepStick> ComparisonComparison
SilentStepStickTMC2100 5VTMC2100TMC2130TMC2208TMC2209TMC5160
SilentStepStick (bottom view)SSSSSSSSSSSSSSSSSS
InterfaceStep/DirStep/DirStep/Dir or SPIStep/DirStep/DirStep/Dir or SPI
ConfigurationCFG PinsCFG PinsCFG Pins or SPICFG Pins or UARTCFG Pins or UARTSPI 1
Native Microsteps 2up to 1/16up to 1/16up to 1/256up to 1/256up to 1/256up to 1/256
microPlyer Microsteps1/2561/2561/2561/2561/2561/256
Logic Supply Voltage (VIO)5V3 - 5V3 - 5V3 - 5V3 - 5V3 - 5V
Motor Supply Voltage (VM)4.75 - 46V5.5 - 46V5.5 - 46V5.5 - 35V5.5 - 28V10 - 35V (HV 50V)
Phase Current max (RMS) 31.2A1.2A1.2A1.2A1.7A3.0A
RDSon0.5 Ohm0.5 Ohm0.5 Ohm0.3 Ohm0.2 Ohm0.1 Ohm (HV 0.2 Ohm)
Rsense110 mOhm110 mOhm110 mOhm110 mOhm110 mOhm75 mOhm
Internal V-Regulator 4disabledenabledenabledenabledenabledenabled
Standby current reductionyesyesyesyesyesyes
stealthChopyesyesyesyesyesyes
spreadCycleyesyesyesyesyesyes
coolStep--yes-yesyes
stallGuard--yes-yesyes
dcStep--yes--yes

Notes / Hints

  • The TMC22xx and TMC516x drivers have an improved stealthChop mode (stealthChop2), which works better on higher accelerations.
  • The resistance of the TMC22xx output drivers (RDSon) are a bit lower compared to the TMC21xx, which gives a lower power dissipation.
  • The TMC2209 drivers with UART interface have a few more features, which can be used for motor current setting via software or sensorless homing when the driver is connected via UART to the mainboard.
  • The TMC2130 and TMC516x drivers with SPI interface have a few more features, which can be used for motor current setting via software or sensorless homing when the driver is connected via SPI to the mainboard.
  • If the power up/down sequences for SilentStepSticks with variable logic voltage (3-5V) can not be ensured, then we strongly recommend the SilentStepStick Protector.

  1. no standalone mode ↩︎

  2. without interpolation (microPlyer) ↩︎

  3. maximum motor phase current only possible with a heat sink and active cooling (no heat sink for TMC5160) ↩︎

  4. Motor Supply Voltage (VM) is always needed, when the internal voltage regulator is enabled/used ↩︎

Từ khóa » Tmc2208 Vs Tmc2209 Vs Tmc2225