Cv Value & Flow Rate Calculator｜Product & Technical Support
Product Information
【Explanation of symbols】 QL [m3/h] : Liquid flow rate（h : hours） Qg [m3/h (normal) ] : Gas flow rate in standard conditions (15℃ 0.1013 MPa abs) P1 [MPa abs] : Primary absolute pressure ※3 P2 [MPa abs] : Secondary absolute pressure ※3 t [℃] : Fluid temperature GL : Liquid relative density（Water = 1） Gg : Gas relative density（Air = 1） 【Notes on use】 ※1 Please handle the calculation result as reference value. It is a standard for selection of valves, depending on the specific piping conditions and conditions of use, there is a possibility that actual results may differ from calculation results. ※2 Calculation of viscosity correction is necessary when the fluid is liquid and the kinematic viscosity is 20 mPa・s or more and the calculated Cv value is 0.01 or less. Please contact us if the fluid specification requires viscosity correction. ※3 For P1 and P2, please use pressure close to the valve. If calculation is made using the pressure at the point away from the valve, large errors may occur in the calculation results due to pressure loss etc. of piping. Return to Product & Technical Support Inquiries
- HOME
- Product & Technical Support
- Cv Value & Flow Rate Calculator
What is Cv value?
The valve flow coefficient according to the JIS standard, represents the flow capacity in US gallons/minute of 60° F pure water when it is flowing through the valve with a pressure difference of 1 psi at the specified travel (operation range).
Cv value and flow rate calculation
Calculating the flow rate from the Cv value requires complex calculations. We have created a Cv value and flow rate calculator, so please utilize it.
If you want to calculate the Cv value and flow rate outside of the specified units, please contact us.
| 1 | Select calculation method | Cv value | Flow rate |
|---|---|---|---|
| 2 | Select fluid type | Liquid | Gas |
| Enter specific gravity | |||
| 3 | Enter flow rateSelect unit | Select unit | |
| 4 | Select pressure With both gas and liquid vacuum (negative pressure), enter the absolute pressure | Gaugepressure | Absolutepressure |
| Select pressure unit | Select pressure unit kPa MPa mbar bar psi mmH2O mmHG atm kgf/cm2 | ||
| Enter pressure | |||
| Differential pressure | |||
| Reference Cv value00.00 ※ Depends on the following formulas. | |||
【Explanation of symbols】 QL [m3/h] : Liquid flow rate（h : hours） Qg [m3/h (normal) ] : Gas flow rate in standard conditions (15℃ 0.1013 MPa abs) P1 [MPa abs] : Primary absolute pressure ※3 P2 [MPa abs] : Secondary absolute pressure ※3 t [℃] : Fluid temperature GL : Liquid relative density（Water = 1） Gg : Gas relative density（Air = 1） 【Notes on use】 ※1 Please handle the calculation result as reference value. It is a standard for selection of valves, depending on the specific piping conditions and conditions of use, there is a possibility that actual results may differ from calculation results. ※2 Calculation of viscosity correction is necessary when the fluid is liquid and the kinematic viscosity is 20 mPa・s or more and the calculated Cv value is 0.01 or less. Please contact us if the fluid specification requires viscosity correction. ※3 For P1 and P2, please use pressure close to the valve. If calculation is made using the pressure at the point away from the valve, large errors may occur in the calculation results due to pressure loss etc. of piping. Return to Product & Technical Support Inquiries Từ khóa » Cv M3
-
Cv Calculator - Swagelok
-
Volgen CV-M3/CV-M3-A Power Supply - EBay
-
ESDEN CV-M3/CV-M3-A POWER SUPPLY - EBay
-
Control Valve Relation Between Cv And Kv | Cv = 1.156Kv - Inst Tools
-
Calorific Value (CV) | National Grid Gas
-
Cv And Kv Relationship - Instrumentation Applications
-
CVM3 Series Valve Mounted Cylinder, Single Acting, Spring Return ...
-
ESDEN CV-M3/CV-M3-A POWER SUPPLY – Jordan Anwar Est.
-
M3 Driveshaft Shop
-
A CV Curves Of M3//AC At Various Potential Windows From 0.8 To 1.6 V ...
-
New CV Axle Assembly For M3 - Ubuy Singapore
-
Motopompe Essence 5.5CV Tsurumi TE3 80 HA (66 M3/h)
-
Driveshaft CV Joint Gasket - E46 M3, Z4M - Turner Motorsport