CX-Q 2K4

  1. Slide 1
  2. Slide 2

Q-SYS CX-Q Series network amplifiers combine a legacy of robust power amplifiers, advancements in high-efficiency output devices and native network transport, control and monitoring capabilities. CX-Q 2K4 features four channels, capable of delivering customized power output loading and a total maximum power of up to 2000 W. Low-Z, 70 V or 100 V direct drive are available on all channels.

Works with Google Meet badge
Certified for Microsoft Teams badge

User Manual

Specifications

Software

Model Transition Chart

Resources

  • Documents
    • User Manual - CX-Q Series Network Amplifiers
    • User Manual - CX-Q Series Network Amplifiers - German
    • User Manual - CX-Q Series Network Amplifiers - French
    • User Manual - CX-Q Series Network Amplifiers - Spanish
    • User Manual - CX-Q Series Network Amplifiers - Russian
    • User Manual - CX-Q Series Network Amplifiers - Chinese
    • User Manual - CX-Q Series Network Amplifiers - Arabic
    • User Manual - CX-Q Series Network Amplifiers - Japanese
    • CX-Q 4-Channel Specification Sheet
    • CX-Q 4-Channel Specification Sheet - De
    • CX-Q 4-Channel Specification Sheet - French
    • CX-Q 4-Channel Specification Sheet - Spanish
    • CX-Q 4-Channel Specification Sheet - Chinese
    • AC Current Draw
    • Heat Loss
    • Q-SYS™ Technical Note - Troubleshooting Networking & SIP
    • Architect and Engineering Specifications - CX-Q 2K4
    • Architectural and Engineering Specifications - CX-Q 2K4 (German)
  • Compliance Documents
    • Declaration of Conformity (DoC)
  • Drawings
    • 2D dxf - Front & Rear Panel Detail
    • 2D dxf
    • Revit
  • Q-SYS Training
  • Image Gallery
    • Front Left
    • Front Right
    • Rear

Image Gallery

Close 1 of 3 Front Left CX-Q 2K4 - Front Right Rear Previous Slide Next Slide
  1. Slide 1
  2. Slide 2
  3. Slide 3
Title Owner
q_amp_cxqseries_usermanual.pdfq_amp_cxqseries_usermanual.pdf
User Manual - CX-Q Series Network Amplifiers User Manual for the CX-Q Series Network Amplifiers, including the CX-Q 2K4, CX-Q 4K4, CX-Q 8K4, CX-Q 4K8, and CX-Q 8K8.

Available for download in Arabic | Chinese (Simplified) | French | German | Japanese | Russian | Spanish

Title
q_rep_specs_cxq_4ch.pdfq_rep_specs_cxq_4ch.pdf
CX-Q Series (4-channel) Network Amplifiers for the Q-SYSPlatform Specification Sheet Specification sheet for the CX-Q 4-channel amplifiers

Available for download in Chinese (Simplified) | French | German | Spanish

Current Slide: 1 / 1 Q-SYS Reflect logo banner

Connect to Q-SYS Reflect

This Q-SYS Product can be connected to our powerful monitoring and management solution.

Start your free trial today!

Features and Benefits

Build for Q-SYS – Simple drag-and-drop integration into your Q-SYS design, enabling network routing, advanced processing and control.

Legacy of power redefined – These network amplifiers are built with a 5th generation high-efficiency, Class-D hybrid powertrain design built upon the dependable PL380 PowerLight™ amplifier platform.

Flexible & efficient channel power distribution – CX-Q Series network amplifiers feature FlexAmp™ and FAST (Flexible Amplifier Summing Technology™), which combine to provide extreme flexibility in output deployment.

Routable input options – Four channels of mic/line inputs (with +12 V phantom power) for additional on-ramps into Q-SYS.

Additional Features

  • PowerLight universal switchmode power supply with PFC for highest efficiency, improved audio performance and low weight
  • Touch-proof Euroblock loudspeaker connections
  • Eight bi-directional GPIO connections for further control and integration of third-party peripherals within Q-SYS
  • Automatic energy saving modes ensure that the amplifier will draw the minimum amount of AC power while still providing outstanding audio quality

General Specifications

Note: All native Q-SYS peripherals and end points, including CX-Q Series, require a connected Q-SYS Core to configure and operate.

CX-Q 2K4 CX-Q 4K4 CX-Q 8K4
Typical distortion
0.02 - 0.05%
0.04 - 0.1%
Maximum distortion 4Ω - 8Ω 1.0%
Frequency response 20 Hz - 20 kHz +0.2 dB / -0.7 dB
Noise
Unweighted output muted > 102 dB
Weighted output muted > 106 dB
Gain (1.2V setting) 33 dB 35 dB 38 dB
Damping factor > 100
Input impedance > 8k balanced and > 4k unbalanced
Amplifier and load protection Short circuit, open circuit, over current, over voltage, thermal, RF, DC fault shutdown, active inrush limiting, on/off muting
AC power input Universal power supply 100 - 240 VAC, 50 - 60 Hz
Agency approvals UL, CE, RoHS/WEEE compliant, FCC Class B (conducted and radiated emissions)
Carton contents IEC cable, quick start guide, Euro (green) connectors

Power Specifications

CX-Q 2K4 CX-Q 4K4 CX-Q 8K4
Max Power Max Power Max Power
4 Independent Channels A, B, C, D 70V 700 W 1000 W 1250 W
100V 700 W 1000 W 1250 W
16Ω 350 W 500 W 625 W
700 W 1000 W 1250 W
800 W 1500 W 2400 W
600 W 800 W 2750 W
2 Channel BTL Bridged A+B or C+D Doubles Voltage 140V 1500 W 2000 W 2400 W
200V 1500 W 2000 W 2400 W
1500 W 3000 W 4000 W
1400 W 1700 W 5000 W
NR* NR* 3000 W
2 Channels Parallel AB or CD Doubles Current 70V 1400 W 2000 W 2400 W
100V 1400 W 2000 W 2400 W
800 W 1000 W 1250 W
1250 W 2000 W 2400 W
1500 W 2500 W 4000 W
3 Channels Combined in Parallel ABC Triples Current 800 W 1000 W 1250 W
1250 W 2000 W 2400 W
1500 W 3000 W 4500 W
1 Channel Bridged/Parallel AB+CD Doubles Current and Voltage 2500 W 3500 W 4200 W
3000 W 4000 W 7000 W
NR* NR* 8000 W
4 Channels Combined in Parallel ABCD Quadruples Current 800 W 1000 W 1250 W
1250 W 2000 W 2500 W
1700 W 4000 W 5000 W
2500 W 4000 W 7000 W

NR* = Not Recommended due to excessive current draw

Controls, Indicators and Connections

CX-Q 2K4 CX-Q 4K4 CX-Q 8K4
Controls and indicators (front) Power • Channel MUTE buttons • Channel SELECT buttons • Channel Input Signal and CLIP LED Indicators Channel Output and LIMIT LED meters • NEXT, PREV, ID buttons • Control knob
Controls and indicators (rear) AC Power Disconnect (IEC C-14)
Input connectors "Q" models - 3-pin Euro (green) and Q-LAN Network connectivity
Output connectors 8-pin Euro (green)

Weights and Dimensions

CX-Q 2K4 CX-Q 4K4 CX-Q 8K4
Dimensions (H×W×D) mm 89 × 482 × 406 89 × 482 × 406 89 × 482 × 406
Dimensions (H×W×D) in 3.5 × 19 × 16 3.5 × 19 × 16 3.5 × 19 × 16
Weight net 10.4 kg / 23 lb 11.3 kg / 25 lb 11.8 kg / 26 lb
Weight shipping 12. 2 kg / 27 lb 13.2 kg / 29 lb 13.6 kg / 30 lb

All specifications are subject to change without notice.

  • Product Registration
  • Support Portal
  • Software & Firmware
  • Training (Opens in new window)
  • Document Library
  1. Warranty / Registration
  2. Support Portal
  3. Software & Firmware
  4. Training
  5. Document Library

Từ khóa » Cx Qc 2k4