Dual Channel 25MSPS 16-bit A/D for D.Module2 DSP/FPGA Systems October 20, 2022
CAN FD USB adapter for embedded computers now available August 5, 2022
CAN Software Kits for Windows Updated to v5.10 – New PCIe support / drivers March 21, 2022
CAN-FD USB Adapter now available February 4, 2022
Cascading 8-Channel CAN Bus Star Repeater now available February 4, 2022
Blog Categories
Categories
Traquair Blog
CAN Blog
DSP & Data Acquisition Blog
The D.Module2.C6747 is based on the Texas Instruments processor TMS320C6747. It is characterized by low power requirements and a broad range of data acquisition and communication interfaces. In the D.Module2 family it can be used independently or in conjunction with vertically stacking data acquisition and FPGA modules.
Key Features
TMS320C6747 floating point DSP
100MBit Ethernet, USB2.0
64 Mbytes RAM
versatile peripheral interfaces
2xUART, I2C, SPI, GPIO
low power
stand-alone operation
Applications
The D.Module2.C6657 is a perfect choice for industrial control and measurement. The large number of serial McASP channels for example facilitates building multi-channel, high resolution, synchronously sampled data acquisition systems, as used in vibration monitoring and analysis. A host PC can be connected via USB or Ethernet.
Specifications
DSP
TMS320C6747
300, 375, or 456 MHz floating-point DSP, 2400, 3000, or 3648 MMACS
Memory
DSP-internal
32K bytes data cache, 32K bytes program cache, 256K bytes direct mapped or level-2 cache, 128K bytes shared RAM
quadrature and direction/count mode,Index and Strobe inputs, 32 bit counter registers
PWM
3
16-Bit Time-Base Counter, 6 Single Edge, 6 Dual Edge Symmetric or 3 Dual Edge Asymmetric Outputs, Dead-Band, PWM Chopping, Trip Zone
Capture Timer
3
up to 4 events per channel, also configurable as auxillary PWM
System Supervisor
voltage and watchdog
Emulation Interface
JTAG
I/O Level
LVTTL / LVCMOS
all signals except ETH and USB: high level min. 2V, max. 3.5V, low level min. -0.2V, max. 0.8V, output drive: external bus interface:± 12 mA, all others ± 4 mA
Power Supply
3.3V
single supply, 750mA typ.
Firmware
D.Module2.BIOS
bootloader, board initialization, board configuration, flash memory programming, UART and USB I/O
Setup Utility
program and data file uploads to the flash memory via USB or UART
Config File
user- configurable text file with program and initialization parameters
Temperature Range
0 – 70°C
Connectors
BUS1, BUS2, COM, EXP
Molex 71436-2164
JTAG
14-pin, 2.54mm pitch
Mechanics
86.8 x 58.4 mm, overall height: 16mm
ROHS
compliant
Note: pin multiplexing on the TMS320C6747 DSP imposes some restrictions on the simultaneous use of peripherals. Please refer to the D.Module2.C6747 data sheet for detailed information.
Ordering Information
D.Module2.C6747
standard module
DK.C6747
C6747 development kit including D.Module2.C6747, XDS100 JTAG in-circuit emulator, D2.Base.P base board, power supply, RS232 and USB cable, support software, user’s guide, and free support via Email or phone
DK.C6747-FMC
C6747 and FPGA development kit including D.Module2.C6747, D.Module2.6SLX45T, XDS100 JTAG in-circuit emulator, D2.Base-FMC base board, power supply, USB cable, DSP support software, FPGA interface examples in VHDL, user’s guides, and free support via Email or phone
DS.TCP/IP-C6747
Ethernet software development kit including libraries, sample programs, documentation, and evaluation license for the D.SignT TCP/IP stack
Peripheral Daughter Cards
D.Module2.6SLX45T
D.Module2.ADDA500K16
D.Module.ADDA12MUX (mit D2.Base + SON.DM2-DM)
D.Module.ADDA16 (mit D2.Base + SON.DM2-DM)
D.Module.AD7722 (mit D2.Base + SON.DM2-DM)
D.Module.PCM3003 (mit D2.Base + SON.DM2-DM)
Development Tools
Emulators
XDS200
XDS220
XDS220ISO
XDS560V2 System Trace
XDS560V2 LC Traveler
XDS560V2 STM Traveler
Compiler
Code Composer Studio
Prototyping Boards
D2.Base.I
D2.Base.P
D2.Base-FMC (with D.Module2.6SLX45T)
TCP/IP Stack
DS.TCPIP-DM6657
D.Module2.C6747 Datasheet
1 file(s) 984.58 KB Download Request a quotation Shopping Cart Manage Cookie Consent We use cookies to optimize our website and our service. FunctionalFunctional Always active The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.PreferencesPreferencesThe technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.StatisticsStatisticsThe technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.MarketingMarketingThe technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes. Manage options Manage services Manage {vendor_count} vendors Read more about these purposes Accept Deny Preferences Save preferences Preferences {title} {title} {title}Manage consent
