Plate heat exchanger, high heat transfer efficiency.
The panels are designed to be assembled with large through-through clearances, making it easy to clean all heat exchanger plates, stabilizing capacity during operation.
Low power consumption reduces operating costs.
Heat exchanger plate made of 304 stainless steel resists corrosion when operating in harsh environments.
Diverse capacity, designed according to the needs of customers.
The W.X.R evaporative condenser is a condenser in an industrial refrigeration system that combines a gas water cooling system and a forced air water cooling system into one complete unit.
The condenser is designed to be assembled into a Module form, making it easy to transport and install at the construction site.
With an optimized design for energy saving, and at the same time solving the ominous problem of power loss due to dirt during operation, the W.X.R condenser is the first choice trusted by investors.
Working principle
The high-temperature refrigerant vapor at the end of the compression process is fed into the upper steam manifold of the condenser to perform the cooling process and condense back into a liquid. The refrigerant after condensing is returned to the high-pressure container through the liquid manifold below the condenser to continue the circulation of the cold cycle.
The cooling process is done by a cooling water pump located below the condenser, through the nozzles, water is sprinkled evenly on the surface of the heat exchanger plates forming a thin film of water. After absorbing the heat of the refrigerant, part of the water turns into steam and is discharged into the air by the fan. The rest of the water is passed through the radiator plastic sheets where the water exchanges heat with the cold air stream from the blower, the water after cooling is put into the storage tank and the pump circulates back to cool the refrigerant.
The amount of evaporated water will be supplemented by an automatic water float placed inside the tank.
Specifications
W.X.R Standard Condenser Specifications (calculate temperature + 28oC and condenser temperature + 35oC).
Model
Unit
WXRB-1700
WXRB-2100
WXRB-2500
Design capacity
KW
1700
2100
2500
Actual capacity
KW
1200
1500
1800
Water pump capacity
KW
4.0 x 1
5.5 x 1
5.5 x 1
Fan power
KW
4.0 x 3
5.5 x 3
5.5 x 4
Covering length
mm
5165
6205
7490
Covering width
mm
2230
2230
2230
Covering height
mm
4175
4175
4175
Dry weight
Kg
7600
9050
10850
Working weight
Kg
11900
14400
17250
Voltage
3Phase/380V/50Hz
Reviews
There are no reviews yet.
Be the first to review “Dàn ngưng bay hơi W.X.R” Cancel reply
Your email address will not be published.Required fields are marked *
Your rating * Rate… Perfect Good Average Not that bad Very poor
Your review *
Name *
Email *
Save my name, email, and website in this browser for the next time I comment.
English 
Vietnamese 
