Dao Phay Cầu YG1 E2480 – .vn

Trang chủ » Dao Phay Cầu » Dao Phay Cầu YG1 E2480 – .vn

Có thể bạn quan tâm

Dao phay cầu YG1 E2480...series

Vật liệu: HSS-Co8 (Cobalt 8%)

HSSCo8, 2 FLUTE REGULAR LENGTH BALL NOSE E2480 SERIES

The two flute ball End Mills are designed for milling of radius bottom slot, fillet and special contour. The end teeth are cut to center allowing these end mills to drill into material at the beginning of a slotting cut. The two flute design provides good chip ejection ability in slotting.

EDP No. Radius of Mill Shank Length Overall
Ball Nose Diameter Diameter of Cut Length
UNCOATED R (±0.02)
E2480010 R0.5 1.0 6 2.5 50
E2480015 R0.75 1.5 6 4 50
E2480020 R1.0 2.0 6 5 50
E2480025 R1.25 2.5 6 6 60
E2480030 R1.5 3.0 6 8 60
E2480901 R2.0 4.0 6 8 70
E2480902 R2.5 5.0 6 10 80
E2480903 R3.0 6.0 6 12 90
E2480904 R3.5 7.0 8 14 90
E2480905 R4.0 8.0 8 14 100
E2480090 R4.5 9.0 10 18 100
E2480100 R5.0 10.0 10 18 100
E2480110 R5.5 11.0 12 22 100
E2480120 R6.0 12.0 12 22 110
E2480130 R6.5 13.0 12 26 110
E2480906 R7.0 14.0 12 26 110
E2480907 R7.5 15.0 12 30 110
E2480160 R8.0 16.0 16 30 140
E2480170 R8.5 17.0 16 34 140
E2480180 R9.0 18.0 16 34 140
E2480190 R9.5 19.0 16 38 140
E2480200 R10.0 20.0 20 38 160
E2480210 R10.5 21.0 20 45 170
E2480220 R11.0 22.0 20 45 170
E2480230 R11.5 23.0 20 50 180
E2480908 R12.0 24.0 20 50 180
E2480240 R12.0 24.0 25 50 180
E2480250 R12.5 25.0 25 50 180
E2480260 R13.0 26.0 25 50 180
E2480270 R13.5 27.0 25 50 180
E2480280 R14.0 28.0 25 50 180
E2480300 R15.0 30.0 25 55 180
E2480320 R16.0 32.0 32 60 180
E2480350 R17.5 35.0 32 60 180
E2480400 R20.0 40.0 32 65 200
E2480500 R25.0 50.0 42 75 210

Từ khóa » Dao Phay Cầu