Delrin Anti-Backlash For 8mm Lead Screw Trapezoidal ACME

Delrin Anti-backlash Nut for T8x8 or T8x2 8mm Trapezoidal ACME lead screw. Please Specify Size Above.

Please note: there are at least two common types of 8mm lead screws. One is 2mm pitch 4-start (8mm per turn), the other is 2mm pitch single start (2mm per turn). We have anti-backlash nuts for both types; please check your lead screw and your selection above carefully before purchasing.

Features:

  • Silent - Unlike brass nuts, delrin nuts are almost completely silent
  • Easily modified - Delrin is easy to trim or cut by a hand saw or even a hot knife making it much easier to modify for any application
  • Tighter tolerance - Delrin nuts have a tighter tolerance than brass nuts, both in radial and axial direction. In some cases, the main/front nut could be used alone to provide satisfactory accuracy.
  • Self-compensating - Spring tension keeps a tight tolerance even after lead screw or brass nut wears out
  • Adjustable preload - Adjustable from 4 N to 8 N with stock spring (higher preload could be achieved by substituting a stiffer spring)

Specifications:

  • Dimension - Please refer to the drawing
  • Delrin AB Nut OD: 30mm
  • Delrin AB Nut Mounting Hole Distance: 22mm center to center
  • Delrin AB Nut Mounting Holes: Non Threaded 3.7mm diameter
  • Materials - Delrin and steel spring
  • Weight - 8 g
  • Manufacturer - ZYLtech Engineering LLC, Houston, TX
  • Part numbers:ABN-Tr8x8D and ABN-Tr8x2D

Từ khóa » T8x2 Vs T8x8