Drill Crown, High Speed Plus Natural Stone, G1x2", X 14 Mm

Trang chủ » G1x2.con » Drill Crown, High Speed Plus Natural Stone, G1x2", X 14 Mm

Có thể bạn quan tâm

Products. . .InstallationCore drillingDownInstallationCore drillingCore drill bits Drill crown, High Speed Plus natural stone, G1x2", x 14 mm The HIGH SPEED Plus natural stone is designed for wet drilling.
  • Extremely fast cutting segments for hard materials Long service life despite soft diamond segments For drilling in material combinations (tiles & masonry) Overwound drill bit for exact rotation and therefore reduced wear Standard G1/2" connection, suitable for all ROTHENBERGER drill motors
Further product detailsChoosen variantDrill crown, High Speed Plus natural stone, G1x2", x 14 mm No. FF44814Buy from the dealer
Buy online
Find a dealer nearby

Please select a dealer via the Dealer search

Product description
  • Product description
  • Functions and features
  • Scope of delivery
  • Technical data

Product description

The HIGH SPEED Plus natural stone diamond core bit with G1/2 inch threaded mount is suitable for wet drilling. With a maximum working length of 125 mm, the diamond core bit can drill holes with a diameter of 67 mm. Extremely easy-cutting drill bit with a long service life thanks to the high segments with a high diamond content. The overturned core bit body reduces wear on the core bit. Drilling at the edge or at the edge of the material without damaging it is possible thanks to the use of diamond rings.

Functions and features

Wet drilling

Scope of delivery

  • High Speed Plus natural stone, G1/2", D=14mm, NL=125mm

Technical data

The most important facts at a glance
Diameter (min-max)14 – 14 mm
Number of segments0
ProtectionIP 20
Speed electronicsNo
Thread pick-upStandard
TilesNo
ClinkerYes
MamorYes
MasonryYes
GraniteYes
ConcreteYes
ScreedNo
AsphaltYes
Lime sandstoneNo
Strongly reinforced concreteYes
Drilling stroke with unit of measurement125 mm
Useful length with unit of measurement125 mm
Drilling area concrete with unit of measurement14 mm
Drilling area masonry with unit of measurement14 mm
Segment dimension length x width x height with unit of measurement0 X 0 X 0 mm
Show moreShow less

Recommended for you

Vacuum pump, RODIA-VAC, 230 volts with 10 litre safety tankNo. FF35200Water extraction ring for RODIACUT 150 /131 DWS/170-CNo. FF35700Water extraction ring for RODIACUT 250 /202/270-CNo. FF35730Water pressure vessel, 10 litres, 2.5 metre hose compatible with gardena couplingNo. FF35028Water submersible pump RODIAPUMP,conveyor. 5.5mNo. FF35029Water connection hose for RODIADRILL/RODIACUTNo. FF35301

Từ khóa » G1x2.con