EV-PEAK C1-XR Instruction Manual - ManualsLib

× Bookmark added × Added to my manuals

1. Manuals
2. Brands
3. EV-PEAK Manuals
4. Battery Charger
5. C1-XR
6. Instruction manual

EV-PEAK C1-XR Instruction Manual Hide thumbs 1 Table Of Contents 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

• page of 26 Go / 26
• Contents
• Table of Contents
• Bookmarks

Advertisement

Table of Contents

• 1 Table of Contents
• 2 Introduction
• 3 Specification
• 4 Main Features
• 5 Warning and Safety Notes
• 6 Program Flow Chart
• 7 Operating Program
  • 7.1 Explanation of Buttons
    • 7.1.1 Program Start
    • 7.1.2 Program Stop
  • 7.2 Discharge Program
  • 7.3 Battery Memory
  • 7.4 Battery Memory Set
    • 7.4.1 System Setting
    • 7.4.2 Error Message
    • 7.4.3 Warranty and Service
• Download this manual

C 1 -XR AC/DC SMART BALANCE CHARGER INSTRUCTION MANUAL Table of Contents Previous Page Next Page

• 1
• 2
• 3
• 4
• 5

Advertisement

Table of Contents

Related Manuals for EV-PEAK C1-XR

• Battery Charger EV-PEAK d610ac Operating Manual Intelligent digital balance charger (11 pages)
• Battery Charger EV-PEAK R1 Instruction Manual Touch screen fast charger / discharger (31 pages)

• Battery Charger EV-PEAK U4 Product Manual (8 pages)

Summary of Contents for EV-PEAK C1-XR

• Page 1 AC/DC SMART BALANCE CHARGER INSTRUCTION MANUAL...

• Page 2: Table Of Contents

  TABLE OF CONTENTS INTRODUCTION....................01 SPECIFICATION....................03 MAIN FEATURES....................04 WARNING AND SAFETY NOTES................06 PROGRAM FLOW CHART..................09 PROGRAM DESCRIPTION.................10 OPERATING PROGRAM..................11 EXPLANATION OF BUTTONS..............12 CHARGING PROGRAM................13 DISCHARGE PROGRAM................15 LITHIUM BATTERY STORAGE PROGRAM..........16 BATTERY MEMORY SET AND CALL OUT...........17 BATTERY CHECKING.................18 SYSTEM SETUP....................20 FAULTY OPERATION..................22 CERTIFICATION INFORMATION................23 AFTER SALE SERVICE..................24...

• Page 3: Introduction

  C1-XR is built-in switching power supply. It can be powered up with 12V car battery or 100-240V AC input, suitable for use with LiPo / LiFe / LiHV / Li-lon / NiMH / NiCd / Pb battery.
• Page 4 INTRODUTION 1.Mode / ESC 2.- Dec. 7.Balance port 3.+ Inc. 8.AC Input 4.Start / Enter 9.DC Input 5.LCD screen 10.Temperature Sensor Port 6.Main Output 11.Micro-USB port...

• Page 5: Specification

  SPECIFICATIONS 　 ●AC input Voltage: 100V -240V ●DC input Voltage: 11-18V ●Display Type: LCD ●Control: Button ●Cooling system: 1 cooling fan ●Backlight: Blue ●Weight: 380g ●Dimension: 130*115*61mm ●Safety timer: 1-720min or turn off ●Charge current: 0.1A-10A ●Discharge current: 0.1A-2.0A ●Charge power:max.100W ●Discharge power: max.5W ●Balance current: 400mA/cell ●Memory: 10 different charge/discharge profiles...

• Page 6: Main Features

  Balancing Individual Cells Battery Discharging During the process of discharging, C1-XR Charger can monitor and balance each cell of the battery individually. Error message will be indicated and process will be ended automatically if the voltage of any single one cell is abnormal.
• Page 7 PC Control Software ”Charge Master” Please download the ''PC Monitor” software on our website: www.ev-peak.com. There is mini USB port in the charge which can be used to connect it to the PC. You need optional USB cable (USB A Male to Mini B Male) which is not included in the package.

• Page 8: Warning And Safety Notes

  WARNING AND SAFETY NOTES These warnings and safety notes are particularly important. Please follow the
  instructions for maximum safety; otherwise the charger and the battery can be
  damaged or at worst it can cause a fire. Never leave the charger unattended when it is connected to its power supply.
• Page 9 WARNING AND SAFETY NOTES Never attempt to charge or discharge the following types of batteries.
  
  A battery pack, which consists of different types of cells (including different
  ● manufacturers)
  
  A battery that is already fully charged or just slightly dis charged. ●...
• Page 10 WARNING AND SAFETY NOTES Charging During charge process, a specific quantity of electrical energy is fed into the battery. The charge quantity is calculated by multiplying charge current by charge time. The maximum permissible charge current varies depending on the battery type or its performance, and can be found in the information by the battery manufacturer.
• Page 11 WARNING AND SAFETY NOTES Discharging The main purpose of discharging is to clean residual capacity of the battery, or to reduce the battery voltage to a defined level. The same attention should be paid to the discharging process as charging. The final discharge voltage should be set up correctly to avoid deep-dis- charging.

• Page 12: Program Flow Chart

  Program Flow Chart STOP STOP STOP LiHv LiHv LiHv LiHv LiHv STOP STOP STOP STOP STOP STOP STOP 1. . 0.00 0.00 0.00 0.00 0.00 0.00 STOP
  *.* MAIN OUT STOP NiMH NiCd Trickl
  
  
  
  
  
  
  
  
  
  
  
  
  oFF Batt ry nd volt Back-light FACTORY RESET LiPo 4 2V C PRESS ENTER >...

• Page 13: Operating Program

  OPERATION PROGRAM Depends on different battery types,the operating programs are different Operation Battery Description Program type This charging mode is for charging LiPo/ LiFe/ Lilon/ LiHV Balance Charge battery in normal mode. This program is for discharging LiPo/ LiFe/ Lilon/LiHV Storage LiPo battery which will not be used for long time.

• Page 14: Explanation Of Buttons

  OPERATION PROGRAM Explanation of Buttons Inc. “STOP” button It is used to stop the process or go back to the previous step. “Dec./-“button It is used to go through the menus and decrease the parameter value. “Inc./+”button It is used to go through the menus and increase the parameter value. “START”button It is used to enter parameter or start program.
• Page 15 Connection 1).Connecting
  to
  Power
  Source C1-XR comes with the built in switching power supply.You can connect the AC power cord directly to the main AC socket (100-240V AC) or attaching directly to 12V car batteries. It is critically important that you use a fully charged 13.8V car battery.

• Page 16: Program Start

  OPERATION PROGRAM Charge program BATT/PROGRAM Select Press “STOP” and “-“to go through all the programs and press “START/ENTER to enter LiPo BATT program. START Mode Select BAL-CHG Press “+” and “-” to go through all the modes (balance charge mode,storage mode, discharge mode and fast Dec./Inc.

• Page 17: Program Stop

  OPERATION PROGRAM VARIOUS INFORMATION DURING THE PROCESS Press INC or DEC during the charging or discharging process to view further pertinent information on the LCD screen. Real-time status: battery type, battery cell count, charge Li4S current, battery pack total voltage, elapsed time and charge capacity.

• Page 18: Discharge Program

  OPERATION PROGRAM Discharge program 　　 Warning: Ensure to set the right end voltage, or it may over-discharge the battery. BATT/PROGRAM Select Press “STOP” and “-“to go through all the programs and press “START/ENTER to enter LiPo BATT program. START Mode Select DCHG 4.0V Press “+”...
• Page 19 OPERATION PROGRAM Storage Program “STORAGE” is a function which is specialized for Lithium battery storage, its operation is same as the discharge program. To store for a long time and protect useful time of the battery, it automatically charge/discharge the battery to a safe voltage.

• Page 20: Battery Memory

  OPERATION PROGRAM Battery Memory The charger can store up to 10 different charge/discharge profiles for your convenience, and the stored profiles can be recalled quickly without having to go through the setup process. Battery Memory Set Enter into this program Press “+“or”-”...
• Page 21 OPERATION PROGRAM Battery Meter With this program, user can check the battery cell voltage, input voltage, output voltage, inner temperature and external temperature. Please connect the battery to charger output port. (both main output and balance port). Voltage Meter 1. . 4.17 4.18 4.17 It can check the cell voltage of battery pack.

• Page 22: System Setting

  System Setting The charger will operate with default values for the essential user settings when it is powered on for the first time. The screen displays the following system settings in sequence and the user can change the parameter value on each screen.
• Page 23 System Setting Description Item Select When you start a charge process, the internal safety timer automatically starts running at the same time. It is programmed to prevent overcharging. OFF/ON If the battery proves to be faulty or if the 720 Min termination circuit cannot detect the full battery.

• Page 24: Error Message

  Error Message Incorrect polarity connected. Charger and battery connection is wrong. Input short circuit Input voltage less than required value Battery total voltage is lower than setting value, please check the cell count. Battery total voltage is higher than setting value, please check the cell count.

• Page 25: Warranty And Service

  Warranty and Service COMPLIANCE INFORMATION FOR THE EUROPEAN UNION European Compliance Information Declaration of Conformity The object of declaration described above is in conformity with the requirements of the specifications listed below, following the provisions of the European EMC Directive 2004/108/EC.
• Page 26 7.Disassembly, modification by the user (modifying original connectors, wires, components, etc.). 8. Mechanical damage due to external causes SHENZHEN EV-PEAK NEW ENERGY TECHNOLOGY CO.,LTD www.ev-peak.cn Product specifications and information mentioned in this manual are for reference only, subject to updates without notice.

This manual is also suitable for:

Cq3

Table of Contents

Save PDF

Print

Print page 1 Print document (26 pages)

Rename the bookmark

Cancel

Delete bookmark?

Cancel Delete

Delete from my manuals?

Cancel Delete

Login

Sign In OR Sign in with Facebook Sign in with Google Don't have an account? Sign up! Restore password

Upload manual

Upload from disk Upload from URL Thank you for your help!