Everything You Need To Know About The Seiko (SII) Caliber NH35A

Watches are made up of various parts and components. A movement is also installed because it’s what allows the watch to run in the first place. There are three types of watch movements: mechanical, automatic, and quartz.

Everything started with the mechanical movement until the automatic and quartz movements followed not long after. Every watch brand makes use of movements for their products, especially household names like Seiko. Seiko has many watch movements, including the SII Caliber NH35A.

The Caliber NH35A is considerably one of the best movements that are currently out in the market. What exactly makes it so unique from other movements? We’re here to tell you everything you need to know. Read on below to learn more.

The NH35A

The Seiko SII Caliber NH35A is an upgraded version of the Caliber NH25A. It was first released in early 2011, proving that it’s an excellent product despite its age.

The NH35A is a hand-windable, automatic movement. It’s also widely available in many affordable and microbrand watches.

Measuring the Accuracy

The NH35A’s accuracy is recorded at -20 to +40 seconds a day under normal conditions. It’s also worth noting that this result is also the same without the date complication being active.

To find the measurement of your watch’s accuracy, you have to make sure that your watch is fully wound. If not, the lack of power reserve will affect the results. Additionally, the measurement test must be done within 10 to 60 minutes after fully winding the movement.

Winding It Up

Since winding the movement up is an integral part of measuring its accuracy, it is essential to know when it’s fully wound.

The NH35A is fully wound up after manually turning the crown 55 times. Additionally, the movement is also fitted with the Seiko Magic Lever, so simply shaking it from side to side is enough to get it started.

Crown Position Functions

The NH35A’s crown position functions are as follows:

• 0, which is against the case. Clockwise is for manual winding, while counterclockwise does nothing.
• 1, which is pulled out with one click. Clockwise does nothing, while counterclockwise is for date setting.
• 2, which is pulled out with two clicks. Time setting is the only thing that it can do, both clockwise and counterclockwise.

The Date Position and Country Code

Depending on the factory where it’s made, the N35A has the date at either 3:00 or 6:00, but the former date version is the most common in the market.

To find out which date position your movement has, point the crown to the right. You must then figure out the number that reads from the left portion to the right—does it lead to 3:00 or 6:00? This will allow you to know how the dates are made on the date wheel, but keep in mind that it can be a little different.

The country code, on the other hand, is part of the reference number. This is what indicates the origin of production. J is for Japan, while M is for Malaysia, respectively.

Hand Fitting Type

The hand fitting for NH35A movements can be made for the M or L hand types. The hand fitting type affects the total height of the movement from the bottom to the top of the second hand’s pinion.

For the NH35A, the thickness is measured at 5.32mm, but it can go up to 7.6mm for the Type M to 8mm for the Type L, respectively.

Conclusion

The Caliber NH35A is an excellent watch movement in all aspects. If your watch has this installed, you can be confident that you will know the time more accurately. It might cost you, but it’s a significant investment regardless!

Most parts of a Seiko watch, including the movement, can be switched out to make room for personalized customization. If you’re looking for Seiko mod parts, Crystaltimes USA has got you covered! We offer a wide selection of products that you can use to enhance your seemingly perfect watch. Order yours today!