Everything You Wanted To Know About Taps But Were Afraid To Ask

Toggle navigation Menu

Newman Tools

• 1-800-465-1384
• Email
• Products
• Brands
• Shop
• Links
  • Prices
  • Technical info
  • MSDS/SDS
  • Latest Additions
  • Jokes
  • Newsletter
  • About us
  • Past Newsletters
  • Contact us
• Search

1. Home
2. Taps and Dies
3. "Everything you wanted ..."

"Everything you wanted to know about taps but were afraid to ask"

this page is for information only

Tap Sizes	What is the difference between NC and NF ( National Coarse and National Fine ) thread?	Screw Thread Forms
Styles of taps	Class of thread	GH numbers
Basic Point In Thread Measurement	Constants For Finding Pitch Diameter And Minor Diameter Of Screw Threads	Thread Constants For Various Percentages
Relation Of Tap Pitch Diameter To Basic Pitch Diameter	Tap Limits Product Limits And Class Of Thread	How to order Special Taps

Tap Sizes

Tap Sizes have been standardized to conform with those of standard screws, bolts, and studs. Machine Screw tap sizes range from No. 0 through No. 14; No. 0 being .0600" outside diameter; No. 1, .0730"; No. 2, .0860, etc.--all in .0130 increments. Hand Taps, more commonly designated as Fractional Taps and used today on all production machines, are designated in fractional and integral inch sizes from 1/4" upwards. Threads per Inch are shown for various tooth forms: the Unified series adopted by Great Britain and the United States during the war, and the corresponding American National Standard. NC and UNC mean coarse thread. NF and UNF mean fine thread. NS means special thread. Pitch Diameter is the basic dimension of a screw, threaded hole, or a tap the diameter of an imaginary cylinder, the surface of which passes through the thread where width of thread and space between threads are identical. This cylinder, of course, would be a cone for tapered taps. It is upon Pitch Diameter that tolerance limits are based to establish Class of Thread.

What is the difference between NC and NF ( National Coarse and National Fine ) thread?

The difference between NC and NF is the pitch.

Pitch is the distance between the crests of each thread. (See Image Below)

Coarse threads have a larger pitch ( fewer threads per inch, or a bigger distance between the threads) compared to fine threads.

The pitch can be found by looking at a chart for either NC or NF and changes depending on the diameter. (See tables below)

NC (National Coarse) and UNC (Unified National Coarse) are the same. NF (National Fine) and UNF (Unified National Fine) are the same

NC  ( National Coarse )
Size ( Diameter )	Threads per Inch
1/4"	20
5/16"	18
3/8"	16
7/16"	14
1/2"	13
9/16"	12
5/8"	11
3/4"	10
7/8"	9
1"	8
1-1/8"	7
1-1/4"	7
1-3/8"	6
1-1/2"	6

Link to the Full NC Table

NF ( National Fine )
Size ( Diameter )	Threads per Inch
1/4"	28
5/16"	24
3/8"	24
7/16"	20
1/2"	20
9/16"	18
5/8"	18
3/4"	16
7/8"	14
1"	12
1-1/8"	12
1-1/4"	12
1-3/8"	12
1-1/2"	12

Link to the Full NF Table

Class Of Thread

There are three established Classes of Thread, designated in the Unified series by adding “A” for screws and “B” for nuts (or other internal threads) to show definite limits and tolerances. Class lB Thread is that in which a 1 A screw can be run in readily for quick and easy assembly. The hole is classified as 1 B. The fit is 1 B Thread, and rarely used in modern metalworking.

Class 2B Thread consists of a 2A screw in a 2B hole. This 2B Thread has wide application, accommodates plating, finishes, and coating to a limited extent and, therefore, has fair tolerance allowances. Class 3B Thread means a 3A Screw in a 3B Nut or threaded hole for applications where tolerance limits are close.

GH Numbers

In the tables that follow, tap selections are shown for the Class of Thread desired and, under the Class of Thread heading, applicable GH Numbers are listed. "G” designates Ground Thread. “H” means that pitch diameter is on the high side of basic. These two letters are followed by a numeral showing the tolerance of pitch diameter oversize as follows: H1 = Basic to Plus 0.0005" H2 = Basic Plus 0.0005" to Plus 0.0010" H3 = Basic Plus 0.0010" to Plus 0.0015" H4 = Basic Plus 0.0015" to Plus 0.0020" H5 = Basic Plus 0.0020" to Plus 0.0025" H6 = Basic Plus 0.0025" to Plus 0.0030" H7 = Basic Plus 0.0030" to Plus 0.0035"

The diagram below, exaggerated for clarity, illustrates these several selectives in Pitch Diameter tolerance--including "L" (undersize tolerance), although no "L" taps are shown in this book. Pitch Diameter varies with the number of threads per inch because the number of threads of Pitch of screw determines the height of thread. Since Basic Pitch Diameter is measured from points half the height of the fully formed thread, a hole drilled to provide theoretical 50% thread engagement would be of the same diameter as the pitch diameter of the tap.

handy tip for H limits

decimal over size x 2 plus 1 = H limit

eg

.005 oversize

.005 x 2 plus 1 = H11

eg.

.003 oversize.

.003 x 2 plus 1 = H7

The Basic Point In Thread Measurement

All measurements must have a controlling point or base from which to start. In the case of a screw thread, this control point is called the BASIC or theoretically correct size, which is calculated on the basis of a full form thread. Thus, on a given screw thread, we have the Basic Major Diameter, the Basic Pitch Diameter and Basic Minor Diameter. While it is impossible in practice to form screw threads to their precise theoretical or BASIC Sizes, it is possible and practical to establish limits which the deviation must not exceed. These are called the “Maximum” and “Minimum” Limits. If the product is no smaller than the “Minimum Limit” and no larger than the “Maximum Limit,” then it is within the size limits required. This difference between the Maximum and Minimum Limits is the TOLERANCE. In actual practice the Basic Size is not necessarily between the Maximum and Minimum Limits. In most cases, the Basic Size is one of the Limits. In general, tolerances for internal threads will be above Basic and for external threads, below Basic. See drawing below.

For graphic representation, the Basic Pitch Diameter is commonly designated by a line with variations from it indicated by shorter lines spaced to represent a numerical scale, as shown on the left half of the drawing below. On an actual screw thread, the Basic Dimensions would follow the contour of the theoretically perfect thread, as on the right half of the drawing below. To find the basic pitch diameter or basic minor diameter of any screw thread, subtract the constant for the number of threads per inch from the basic major diameter.

Constants For Finding Pitch Diameter And Minor Diameter Of Screw Threads
Constants for Finding Basic Pitch Diameter			Constants for Finding Basic Minor Diameter
Threads Per Inch	Pitch In Inches	National Thread	Whitworth Thread	Theoretical V	National Thread	Whitworth Thread	Theoretical V
80 72 64 60 56 50 48 44 40 36 32 30 28 27 26 24 22 20 18 16 14 13 12 11-1/2 11 10 9 8 7 6 5-1/2 5 4-1/2 4 3-1/2 3-1/4 3	0.012500 0.013888 0.015625 0.016666 0.017857 0.020000 0.020833 0.022727 0.025000 0.027777 0.031250 0.033333 0.035714 0.035461 0.037037 0.041666 0.045454 0.050000 0.055555 0.062500 0.071428 0.076923 0.083333 0.086956 0.090909 0.010000 0.111111 0.125000 0.142857 0.166666 0.181818 0.200000 0.222222 0.250000 0.285711 0.307692 0.333333	0.00812 0.00902 0.01015 0.01083 0.01160 0.01299 0.01353 0.01476 0.01624 0.01804 0.02030 0.02165 0.02320 0.02406 0.02498 0.02706 0.02952 0.03248 0.03608 0.04059 0.04639 0.04996 0.05413 0.05648 0.05905 0.06495 0.07217 0.08119 0.09279 0.10825 0.11809 0.12990 0.14434 0.16238 0.18558 0.19985 0.21651	0.00800 0.00889 0.01000 0.01067 0.01144 0.01281 0.01334 0.01455 0.01601 0.01779 0.02001 0.02134 0.02287 0.02372 0.02463 0.02668 0.02911 0.03202 0.03557 0.04002 0.04574 0.04926 0.05336 0.05568 0.05821 0.06403 0.07115 0.08004 0.09148 0.10672 0.11642 0.12807 0.14230 0.16008 0.18295 0.19702 0.21344	0.01083 0.01203 0.01353 0.01443 0.01546 0.01732 0.01804 0.01968 0.02165 0.02406 0.02706 0.02887 0.03093 0.03208 0.03331 0.03608 0.03936 0.04330 0.04811 0.05413 0.06186 0.06662 0.07217 0.07531 0.07873 0.08660 0.09623 0.10825 0.12372 0.14434 0.15746 0.17321 0.19245 0.21651 0.24744 0.26647 0.28868	0.01624 0.01804 0.02030 0.02165 0.02320 0.02598 0.02706 0.02952 0.03248 0.03608 0.04059 0.04330 0.04639 0.04812 0.04996 0.05413 0.05905 0.06495 0.07217 0.08119 0.09279 0.09993 0.10825 0.11296 0.11809 0.12990 0.14434 0.16238 0.18558 0.21651 0.23619 0.25981 0.28868 0.32479 0.37115 0.39970 0.43301	0.01601 0.01786 0.02001 0.02134 0.02286 0.02562 0.02668 0.02910 0.03202 0.03558 0.04002 0.04268 0.04574 0.04742 0.04926 0.05336 0.05821 0.06403 0.07114 0.08004 0.09147 0.09851 0.10672 0.11132 0.11642 0.12806 0.14230 0.16008 0.18295 0.21344 0.23284 0.25613 0.28458 0.32017 0.36590 0.39404 0.42689	0.02165 0.02406 0.02706 0.02887 0.03093 0.03464 0.03608 0.03936 0.04330 0.04811 0.05413 0.05773 0.06186 0.06416 0.06662 0.07217 0.07873 0.08660 0.09623 0.10825 0.12372 0.13323 0.14434 0.15062 0.15746 0.17321 0.19245 0.21651 0.24744 0.28868 0.31492 0.34641 0.38490 0.43301 0.49487 0.53294 0.57733

Thread Constants For Various Percentages

Formula for Obtaining Tap Drill Sizes (Select nearest commercial stock drill) (Outside Diameter of Thread) - (0.01299 X Amount of Percentage of Full Thread / Number of Threads per Inch) = Drilled Hole Size (Number of Threads per Inch) X (Outside Diameter of Thread - Selected Drill Diameter / 0.01299) = Percentage of Full Thread Figures in table show amount to subtract from O.D. of screw to obtain specific percentages of thread.

Threads Per Inch	Double Depth	60% Thread	65% Thread	70% Thread	75% Thread	80% Thread	85% Thread
6 7 8 9 10 11 12 13 14 16 18 20 24 27 28 30 32 36 40 44 48 56 64 72 80	0.21651 0.18558 0.16238 0.14434 0.12990 0.11809 0.10825 0.09992 0.09278 0.08119 0.07217 0.06495 0.05412 0.04811 0.04639 0.04330 0.04059 0.03608 0.03247 0.02952 0.02706 0.02319 0.02029 0.01804 0.01623	0.1300 0.1114 0.0975 0.0866 0.0779 0.0708 0.0649 0.0599 0.0556 0.0486 0.0431 0.0389 0.0326 0.0288 0.0276 0.0260 0.0243 0.0216 0.0194 0.0177 0.0161 0.0138 0.0121 0.0107 0.0097	0.1408 0.1207 0.1056 0.0939 0.0844 0.0767 0.0702 0.0649 0.0602 0.0526 0.0466 0.0421 0.0354 0.0312 0.0298 0.0282 0.0263 0.0234 0.0210 0.0192 0.0174 0.0149 0.0131 0.0115 0.0105	0.1517 0.1300 0.1138 0.1011 0.0909 0.0826 0.0755 0.0699 0.0648 0.0566 0.0501 0.0453 0.0382 0.0336 0.0324 0.0304 0.0283 0.0252 0.0226 0.0207 0.0187 0.0160 0.0141 0.0123 0.0113	0.1625 0.1393 0.1219 0.1083 0.0974 0.0885 0.0808 0.0749 0.0694 0.0606 0.0536 0.0485 0.0410 0.0360 0.0347 0.0326 0.0303 0.0270 0.0242 0.0222 0.0200 0.0171 0.0151 0.0131 0.0121	0.1733 0.1486 0.1300 0.1156 0.1039 0.0944 0.0861 0.0799 0.0740 0.0646 0.0571 0.0517 0.0438 0.0384 0.0370 0.0348 0.0323 0.0288 0.0258 0.0237 0.0213 0.0182 0.0161 0.0139 0.0129	0.1842 0.1579 0.1381 0.1228 0.1105 0.1005 0.0921 0.0850 0.0789 0.0691 0.0614 0.0553 0.0460 0.0409 0.0395 0.0368 0.0345 0.0307 0.0276 0.0251 0.0230 0.0197 0.0173 0.0153 0.0138

Relation Of Tap Pitch Diameter To Basic Pitch Diameter

American tap manufacturers use a series of tap pitch diameter limits. These limits feature a .0005” tolerance in tap sizes #0 through 1 inch, and a .001 inch or greater tolerance in tap sizes above 1 inch through 1-1/2 inch diameter, inclusive. The chart shows the relationship between tap pitch diameter limits and basic (nominal) pitch diameter.

Tap Limits Product Limits And Class Of Thread

Engineers frequently receive a request for a Class 3B (or other class) tap. Many times, too, the customer will ask for a tap to produce a “Class 3B Fit”. Ordering taps by these specifications is incorrect, and often impractical. The following information is presented to clarify the difference between the terms Class of Thread, Tap Limits and Product Limits to make ordering taps easier and aid the customer in obtaining the tap best suited for his requirements. Class of Thread refers simply to the tolerances that control the closeness of fit between two threaded mating parts. This term should be used only in reference to a threaded assembly, as, for example, a screw and nut. Product Limits refers to the limits and tolerances of the internal or female thread. The° of tolerance is expressed by the terms Class 2, 2B, 3 and 3B. Product limits refer to the various limits and tolerances applying to nuts or internal threads and are identified by the terms Class 2, 2B, 3 or 3B. Tap Limits refers to the various sizes of taps manufactured to permit selection of a tap which will produce an internal thread within the desired product limit. Tap limits are designated as L-i, H-1 H-2, H-3, etc. In the chart on this page we have illustrated the difference between tap and product limit, using a 1/4-20 tapped hole as the example. Although ground thread taps are produced to precision tolerances under closely controlled manufacturing processes and are guaranteed for accuracy of individual elements, there is always the possibility of the presence of unknown factors which can be detrimental to good tap performance. The tap manufacturer, therefore, is not able to guarantee the size of the tapped hole.

To summarize, the following points should be remembered: 1. A tap cannot produce a Class of Thread. It can produce a tapped hole within specific product limits. 2. Since it is used only in tapping a hole, or producing an internal thread, a tap has no control over the fitting properties of the mating external thread. 3. To produce what is commonly referred to as a “Class of Thread,” both the external and internal threads must be within their respective product limits. Only when both members of a threaded assembly fall within the desired class limits can the proper fit be assured. 4. The acceptability of any class of threaded hole is determined only by an accurate “Go” or “Hi” thread plug gage of the corresponding class. Similarly, the acceptability of a male part with an external thread is also determined by a corresponding “Go” or “Lo” thread ring gage. 5. When ordering taps, specify either the tap limit or the class of thread that identifies the limit of the tapped hole. 6. In special applications, supply as much information as possible. The more information our engineers have to work with, the better they can recommend a tap to do the job properly with least expense. 7. Remember, it is not always the most expensive tap which will do the job best. Our files contain many examples of special jobs which were solved with inexpensive standard taps.

link to Tap Recommendations for Classes of Thread for Unified and American National Screw Threads

Back to Top of Page

link to tap and die index page

May2022, October 2020, updated bw July 2020, January 2019, November 2009 CSS, March 2007, November 2001

The descriptions, illustrations, specifications, dimensions, and part numbers are subject to change without notice.

Servicing the Canadian provinces and territories of Newfoundland, NF, NL, Nova Scotia, NS, New Brunswick, NB, Prince Edward Island, PEI, PE, Quebec, PQ, QC, Ontario, ON, Manitoba, MB, Saskatchewan, SK, Alberta, AB, British Columbia, BC, Northwest Territories, NT, Nunavut, NU, Yukon, YT Servicing Canadian cities, Toronto, Mississauga, Scarborough, Laval , Montreal, Montréal, Vancouver, Ottawa, Gatineau, Calgary, Edmonton, Québec City, Winnipeg, Hamilton, Kitchener, Cambridge, Waterloo, London, St. Catharines , Niagara, Halifax, Oshawa, Victoria, Windsor, Saskatoon, Regina, Sherbrooke, St. John's, Barrie, Kelowna, Abbotsford, Mission, Sudbury Kingston, Saguenay, Trois-Rivieres, Trois Rivieres, Trois-Rivières, Guelph, Moncton, Brantford, Saint John, Thunder Bay, Peterborough, Ajax, Aurora, Brampton, Brock, Burlington, Caledon, Clarington, Durham Region, Oshawa, Pickering, Whitby, Halton Hills, Milton, Oakville, Mississauga, New market, Richmond Hill, Vaughn, Orangeville Servicing US cities, New York, Los Angeles, Chicago, Houston, Philadelphia, Phoenix, San Antonio, San Diego, Dallas, San Jose, Austin, Jacksonville, San Francisco, Indianapolis, Columbus, Fort Worth, Charlotte, Seattle, Denver, El Paso, Detroit, Washington, Boston, Memphis, Nashville, Portland, Oklahoma City, Las Vegas, Baltimore, Louisville, Milwaukee, Albuquerque, Tucson, Fresno, Sacramento, Kansas City, Long Beach, Mesa, Raleigh, Omaha, Miami, Oakland, Minneapolis, Tulsa, Wichita, New Orleans, Arlington, Cleveland, Bakersfield, Tampa, Aurora, Honolulu, Anaheim, Santa Ana, Corpus Christi, Riverside, St. Louis, Lexington, Stockton, Pittsburgh, Saint Paul, Anchorage, Cincinnati, Henderson, Greensboro, Plano, Newark, Toledo, Lincoln, Orlando, Chula Vista, Jersey City, Chandler, Fort Wayne, Buffalo, Durham, St. Petersburg, Irvine, Laredo, Lubbock, Madison, Gilbert, Norfolk, Reno, Winston Salem, Glendale, Hialeah, Garland, Scottsdale, Chesapeake, North Las Vegas, Fremont, Baton Rouge, Richmond, Boise, San Bernardino, Spokane, Birmingham, Modesto, Des Moines, Rochester, Tacoma, Fontana, Oxnard, Moreno Valley, Fayetteville, Huntington Beach, Yonkers, Glendale, Aurora, Montgomery, Columbus, Amarillo, Little Rock, Akron, Shreveport, Augusta, Grand Rapids, Mobile, Salt Lake City, Huntsville, Tallahassee, Grand Prairie, Overland Park, Knoxville, Worcester, Brownsville, Newport News, Santa Clarita, Port St. Lucie, Providence, Fort Lauderdale, Chattanooga, Tempe, Oceanside, Garden Grove, Rancho Cucamonga, Cape Coral, Santa Rosa, Vancouver, Sioux Falls, Peoria, Ontario, Jackson, Elk Grove, Springfield, Pembroke Pines, Salem, Corona, Eugene, McKinney, Fort Collins, Lancaster, Cary, Palmdale, Hayward, Salinas, Frisco, Springfield, Pasadena, Macon, Alexandria, Pomona, Lakewood, Sunnyvale, Escondido, Kansas City, Hollywood, Clarksville, Torrance, Rockford, Joliet, Paterson, Bridgeport, Naperville, Savannah, Mesquite, Syracuse, Pasadena, Orange, Fullerton, Killeen, Dayton, McAllen, Bellevue, Miramar, Hampton, West Valley City, Warren, Olathe, Columbia, Thornton, Carrollton, Midland, Charleston, Waco Servicing the US states of Alabama, AL, Alaska, AK, Arizona, AZ, Arkansas, AR, California, CA, Colorado, CO, Connecticut, CT, Delaware, DE, District of Columbia, DC, Florida, FL, Georgia, GA, Hawaii, HI, Idaho, ID, Illinois, IL, Indiana, IN, Iowa, IA, Kansas, KS, Kentucky, KY, Louisiana, LA, Maine, ME, Maryland, MD, Massachusetts, MA, Michigan, MI, Minnesota, MN, Mississippi, MS, Missouri, MO, Montana, MT, Nebraska, NE, Nevada, NV, New Hampshire, NH, New Jersey, NJ, New Mexico, NM, New York, NY, North Carolina, NC, North Dakota, ND, Ohio, OH, Oklahoma, OK, Oregon, OR, Pennsylvania, PA, Rhode Island, RI, South Carolina, SC, South Dakota, SD, Tennessee, TN, Texas, TX, Utah, UT, Vermont, VT, Virginia, VA, Washington, WA, West Virginia, WV, Wisconsin, WI, Wyoming, WY We can ship to Afghanistan , Aland Islands , Albania , Algeria , American Samoa , AS, Andorra , Angola , Anguilla , Antigua and Barbuda , Argentina , Armenia , Aruba , Australia , Austria , Azerbaijan , Azores , Bahamas , Bahrain , Bangladesh , Barbados , Belarus , Belgium , Belize , Benin , Bermuda , Bhutan , Bolivia , Bonaire , Bosnia , Botswana , Brazil , British Virgin Isles , Brunei , Bulgaria , Burkina Faso , Burundi , Cambodia , Cameroon , Canada , Canary Islands , Cape Verde , Cayman Islands , Central African Republic , Chad , Chile , China , Colombia , Comoros , Congo , Cook Islands , Costa Rica , Croatia , Curacao , Cyprus , Czech Republic , Democratic Republic of Congo , Denmark , Djibouti , Dominica , Dominican Republic , Ecuador , Egypt , El Salvador , England , Equatorial Guinea , Eritrea , Estonia , Ethiopia , Faeroe Islands , Fiji , Finland , France , French Guiana , French Polynesia , Gabon , Gambia , Georgia , Germany , Ghana , Gibraltar , Greece , Greenland , Grenada , Guadeloupe , Guam , GU, Guatemala , Guernsey , Guinea , Guinea-Bissau , Guyana , Haiti , Holland , Honduras , Hong Kong , Hungary , Iceland , India , Indonesia , Iraq , Ireland , Israel , Italy , Ivory Coast , Jamaica , Japan , Jersey , Jordan , Kazakhstan , Kenya , Kiribati , Kosrae , Kuwait , Kyrgyzstan , Laos , Latvia , Lebanon , Lesotho , Liberia , Libya , Liechtenstein , Lithuania , Luxembourg , Macau , Macedonia (Fyrom) , Madagascar , Madeira , Malawi , Malaysia , Maldives , Mali , Malta , Marshall Islands , MH, Martinique , Mauritania , Mauritius , Mayotte , Mexico , Micronesia , Moldova , Monaco , Mongolia , Montenegro , Montserrat , Morocco , Mozambique , N. Mariana Islands , Namibia , Nepal , Netherlands , Netherlands Antilles , New Caledonia , New Zealand , Nicaragua , Niger , Nigeria , Norfolk Island , Northern Ireland , Norway , Oman , Pakistan , Palau , PW, Panama , Papua New Guinea , Paraguay , Peru , Philippines , Poland , Ponape , Portugal , Puerto Rico , PR, Qatar , Reunion , Romania , Rota , Russia , Rwanda , Saba , Saipan , San Marino , Saudi Arabia , Scotland , Senegal , Serbia , Seychelles , Sierra Leone , Singapore , Slovakia , Slovenia , Solomon Islands , South Africa , South Korea , Spain , Sri Lanka , St. Barthelemy , St. Christopher , St. Croix , St. Eustatius , St. John , St. Kitts and Nevis , St. Lucia , St. Maarten , St. Martin , St. Thomas , St. Vincent/Grenadines , Suriname , Swaziland , Sweden , Switzerland , Syria , Tahiti , Taiwan , Tajikistan , Tanzania , Thailand , Timor Leste , Tinian , Togo , Tonga , Tortola , Trinidad and Tobago , Truk , Tunisia , Turkey , Turkmenistan , Turks and Caicos Islands , Tuvalu , Uganda , Ukraine , Union Island , United Arab Emirates , United Kingdom , United States , Uruguay, US Virgin Islands , VI, Uzbekistan , Vanatu , Vatican City State , Venezuela , Vietnam , Virgin Gorda , Wales , Wallia and Futuna Islands , Western Samoa , Yap , Yemen , Zambia , Zimbabwe We try to ship to the world's largest cities Tokyo,Japan, Seoul, South Korea, Mexico City, Mexico , New York City, USA , Mumbai, India , Jakarta, Indonesia , Sáo Paulo, Brazil, Delhi, India , Osaka/Kobe, Japan , Shanghai, China , Manila, Philippines ,Los Angeles, USA ,Calcutta, India , Moscow, Russian Fed., Cairo, Egypt, Lagos, Nigeria, Buenos Aires, Argentina , London, United Kingdom , Beijing, China , Karachi, Pakistan , Dhaka, Bangladesh , Rio de Janeiro, Brazil ,Tianjin, China , Paris, France , Istanbul, Turkey , Lima, Peru , Tehrãn, Iran, Bangkok, Thailand , Chicago, USA , Bogotá, Colombia , Hyderabad, India , Chennai, India , Essen, Germany , Ho Chi Minh City, Vietnam , Hangzhou, China , Hong Kong, China , Lahore, Pakistan , Shenyang, China , Changchun, China , Bangalore, India , Harbin, China , Chengdu, China , Santiago, Chile ,Guangzhou, China , St. Petersburg, Russian Fed , Kinshasa, DRC , Baghdãd, Iraq , Jinan, China , Houston, USA , Toronto, Canada, Yangon, Myanmar (Burma), Alger, Algeria Philadelphia, USA, Qingdao, China , Milano, Italy , Pusan, South Korea, Belo Horizonte, Brazil, Almadabad, India , Madrid, Spain , San Francisco, USA, Alexandria, Egypt , Washington DC, USA , Wuhan, China , Dallas, USA , Guadalajara, Mexico, Chongging, China , Medellin, Colombia, Detroit, USA , Handan, China , Frankfurt, Germany , Porto Alegre, Brazil , Hanoi, Vietnam , Sydney, Australia, Santo Domingo, Dom. Rep., Singapore, Singapore , Casablanca, Morocco , Katowice, Poland , Pune, India , Bangdung, Indonesia, Monterrey, Mexico ,Montréal, Canada , Nagoya, Japan , Nanjing, China , Abidjan, Côte d'Ivoire, Xi'an, China , Berlin, Germany , Riyadh, Saudi Arabia, Recife, Brazil , Dusseldorf, Germany, Ankara, Turkey , Melbourne, Australia, Salvador, Brazil , Dalian, China , Caracas, Venezuela, Adis Abeba, Ethiopia, Athina, Greece, Cape Town, South Africa, Koln, Germany , Maputo, Mozambique, Napoli, Italy