FIRE V2.6 - M5-docs

FIRE v2.6

SKU:K007-V26

Tutorials & Quick Start

Select the development platform you want to use, view the corresponding tutorials & get started quickly.

UIFlow UIFlow This tutorial will show you how to control FIRE devices through the UIFlow graphical programming platform UIFlow2.0 UIFlow2.0 This tutorial will show you how to control the FIRE device through the UIFlow2.0 graphical programming platform

FACES

Arduino IDE Arduino IDE This tutorial will show you how to program and control FIRE devices through Arduino IDE Micropython Micropython This tutorial will show you how to control FIRE devices through Micropython programming

Description

M5Stack FIRE It‘ a cost-effective Wi-Fi IoT controller adopts Espressif ESP32 main control chip, equipped with two low-power Xtensa® 32-bit LX6 microprocessors, with main frequency up to 240MHz. With 8M PSRAM + 16M FLASH memory, 2.0-inch full-color HD IPS display panel, IMU, LED, microphone, speaker, TFCard slot and other peripherals. The full-coverage case ensures circuit stability even in complex industrial applications. The internal offers a wide range of common interface resources (ADC/DAC/I2C/UART/SPI, etc.) which is highly expandable. This functional and powerful IoT controller is very applicable to various product prototyping, industrial control and smart building applications.

• High productization.
  • Exquisite designs, Prototyping right into products
  • Product-grade full-coverage cover for more stable circuit operation
• Low code development:
  • Support UIFlow graphical programming platform, scripting-free, cloud push
  • Fully compatible with Arduino, ESP32-IDF and other mainstream development platforms
  • Support FreeRTOS, with dual-core and multitasking mechanism, it can perform the tasks efficiently, Program optimization.
• High integration.
  • 2.0-inch IPS display panel, 6-axis IMU, programmable RGB lights x10, microphone, speaker, custom buttons x3
  • Built-in Li-ion power, integrated power management chip, supports TypeC and POGO PIN
  • finely tuned RF circuit for stable and reliable wireless communication
• Strong expandability.
  • GROVE expansion ports x3 (I2C, GPIO, UART)
  • Easy access to M5Stack software and hardware system, stackable module design, plug-and-play sensor expansion

Note: GPIO 16 / 17 of FIRE are connected to PSRAM by default, so when you connect or stack other modules, you need to pay attention to avoid conflicts with these two pins to prevent the device from not working properly and generating instability.. Switching operations:Power on:Click the red button on the leftPower off: Quickly double-click the red button on the leftUSB power: By default, It can not be shutdown when USB power is on.

Product Features

• Based on ESP32 development
• 8M PSRAM + 16M FLASH memory combination
• Integrated HD IPS display panel with various hardware peripherals
• Rich resources interface, compatible with M5Stack stacking modules and sensors, highly expandable.
• Adopt M5GO BOTTOM base compatible with 8mm size LEGO blocks, the structure is full of fun to build.
• Microsoft Azure authentication device
• Compatible with multi-platform development:
  • UIFlow
  • MicroPython
  • Arduino
  • .NET nanoFramework

Included

• 1x M5Stack FIRE
• 1x M5GO Charging Base
• 2x LEGO Building Blocks
• 5x LEGO Connections
• 1x M3 Hex Wrench
• 1x Type-C USB (50cm)
• 1x User's Manual

Applications

• IoT Controller
• DIY creator works
• Smart Home Control

Specifications

Specifications	Parameters
ESP32-D0WDQ6-V3	240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi
Flash	16MB
PSRAM	8MB
Input power	5V @ 500mA
Interface	TypeC x1, POGO PIN x1, I2C x1, GPIO x1, UART x1
Keys	Custom Keys x 3
LCD screen	2.0"@320*240 ILI9342C IPS panel, maximum brightness 853nit
Speaker	1W-0928
Microphone	Analog BSE3729 Microphone
IMU	6-axis MPU6886
USB Chip	CH9102F
LED	SK6812 RGB LED x 10
Antenna	2.4G 3D antenna
Battery - 500 mAh @ 3.7V
Operating Temperature	0°C to 40°C
Net Weight	62.3g
Gross Weight	162g
Product Dimensions	54mm x 54mm x 30.5mm
Package Size	105mm x 65mm x 40mm
Cover Material	Plastic ( PC )

Driver Installation

Click the link below to download the driver that matches the operating system. There are currently two driver chip versions, CP210X (for CP2104 version)/CP34X (for CH9102 version) driver compressed package. After decompressing the compressed package, select the installation package corresponding to the number of operating systems to install. (If you are not sure of the USB chip used by your device, you can install both drivers at the same time. During the installation process of CH9102_VCP_SER_MacOS v1.7, an error may occur, but the installation is actually completed, just ignore it.) When using it, if If the program cannot be downloaded normally (the prompt is overtime or Failed to write to target RAM), you can try to reinstall the device driver.

Driver name	Applicable driver chip	Download link
CP210x_VCP_Windows	CP2104	Download
CP210x_VCP_MacOS	CP2104	Download
CP210x_VCP_Linux	CP2104	Download
CH9102_VCP_SER_Windows	CH9102	Download
CH9102_VCP_SER_MacOS v1.7	CH9102	Download

Port Selection on MacOS On MacOS, there may be two available ports. When using them, please select the port named wchmodem.

EasyLoader

EasyLoader It’s a simple yet fast program burner has built-in product-related case programs, which can be burned into the master control in simple steps to verify functional and performance

Download Windows Version Easyloader

Case Description: Load the UIFlow firmware, the built-in demo program supports accelerometer, LED BAR, microphone, keypad and some peripheral sensors testing, the firmware can be used for UIFlow graphical programming.

Pin Mapping

LCD screen & TF card

LCD Pixel: 320x240 TF card support up to 16GB

ESP32 Chip	GPIO23	GPIO19	GPIO18	GPIO14	GPIO27	GPIO33	GPIO32	GPIO4
ILI9342C	MOSI/MISO	/	CLK	CS	DC	RST	BL
TF Card	MOSI	MISO	CLK	CS

Button & Speaker

ESP32 Chip	GPIO39	GPIO38	GPIO37	GPIO25
Button Pins	BUTTON A	BUTTON B	BUTTON C
Speakers	Speaker Pin

GROVE Interface A & IP5306

The power management chip (IP5306) is a custom I2C version, and its I2C address is 0x75. Click here to view the IP5306's register manual.

ESP32 Chip	GPIO22	GPIO21	5V	GND
GROVE A	SCL	SDA	5V	GND
IP5306	SCL	SDA	5V	GND

IP5306 charge/discharge, voltage parameters

Charging	Discharging
0.00 ~ 3.40V -> 0%	4.20 ~ 4.07V -> 100%
3.40 ~ 3.61V -> 25%	4.07 ~ 3.81V -> 75%
3.61 ~ 3.88V -> 50%	3.81 ~ 3.55V -> 50%
3.88 ~ 4.12V -> 75%	3.55 ~ 3.33V -> 25%
4.12 ~ / -> 100%	3.33 ~ 0.00V -> 0%

MPU6886 3-axis accelerometer + 3-axis gyroscope

MPU6886 I2C address 0x68

ESP32 Chip	GPIO22	GPIO21	5V	GND
MPU6886	SCL	SDA	5V	GND

M5GO Base Pins

GROVE Interface B

ESP32 Chip	GPIO36	GPIO26	5V	GND
GROVE B	GPIO36	GPIO26	5V	GND

GROVE Interface C

ESP32 Chip	GPIO16	GPIO17	5V	GND
GROVE C	RXD	TXD	5V	GND

LED strip & microphone & speaker

ESP32 Chip	GPIO15	GPIO34	GPIO25
hardware	SIG Pin	MIC Pin	Speaker Pin

M5 Port Description

PORT	PIN	Note:
PORT-A(red)	G21/22	I2C
PORT-B(black)	G26/36	DAC/ADC
PORT-C(blue)	G16/17	UART

ESP32 ADC/DAC

M-BUS

When use the RGB LEDs of GPIO15, we recommend initialize the pins Mode(15, OUTPUT_OPEN_DRAIN); For more info about pin assignment and pin remapping, please refer to ESP32 datasheet

Related Links

• Datasheet

  • ESP32
  • ILI9342C
  • MPU6886
  • IP5306

• API

  • Arduino API
  • Github

Schematics

• Schematics

Related Video

About M5Stack

Version Updates

Release Date	Product Changes	Notes
2018.6	First Release	/
2019.7	MPU9250 changed to SH200Q+BMM150, TN screen changed to IPS screen	Please upgrade your M5Stack library to the latest version (v0.2.8 or above) to solve the screen reflection problem
2019.8	Change SH200Q to MPU6886	/
2019.11	Battery capacity 600mAh changed to 500mAh	/
2020.4	PSRAM size changed from 4MB to 8MB	/
2021.8	Upgrade to v2.6: BMM150 magnetometer removed, CP2104 changed to CH9102, structure details optimized	/

Note: 2018.2A PCB version of the device does not support C2C (TypeC to TypeC) connection and PD power supply.