Full Text Of "Cisco IOS Firmware Images" - Internet Archive

Skip to main content

Ask the publishers to restore access to 500,000+ books.

Hamburger icon An icon used to represent a menu that can be toggled by interacting with this icon. Internet Archive logo A line drawing of the Internet Archive headquarters building façade. Web icon An illustration of a computer application window Wayback Machine Texts icon An illustration of an open book. Texts Video icon An illustration of two cells of a film strip. Video Audio icon An illustration of an audio speaker. Audio Software icon An illustration of a 3.5" floppy disk. Software Images icon An illustration of two photographs. Images Donate icon An illustration of a heart shape Donate Ellipses icon An illustration of text ellipses. More Donate icon An illustration of a heart shape "Donate to the archive" User icon An illustration of a person's head and chest. Sign up | Log in Upload icon An illustration of a horizontal line over an up pointing arrow. Upload Search icon An illustration of a magnifying glass. Search the Archive Search icon An illustration of a magnifying glass.

Internet Archive Audio

Live Music Archive Librivox Free Audio

Featured

• All Audio
• Grateful Dead
• Netlabels
• Old Time Radio
• 78 RPMs and Cylinder Recordings

Top

• Audio Books & Poetry
• Computers, Technology and Science
• Music, Arts & Culture
• News & Public Affairs
• Spirituality & Religion
• Podcasts
• Radio News Archive

Images

Metropolitan Museum Cleveland Museum of Art

Featured

• All Images
• Flickr Commons
• Occupy Wall Street Flickr
• Cover Art
• USGS Maps

Top

• NASA Images
• Solar System Collection
• Ames Research Center

Software

Internet Arcade Console Living Room

Featured

• All Software
• Old School Emulation
• MS-DOS Games
• Historical Software
• Classic PC Games
• Software Library

Top

• Kodi Archive and Support File
• Vintage Software
• APK
• MS-DOS
• CD-ROM Software
• CD-ROM Software Library
• Software Sites
• Tucows Software Library
• Shareware CD-ROMs
• Software Capsules Compilation
• CD-ROM Images
• ZX Spectrum
• DOOM Level CD

Texts

Open Library American Libraries

Featured

• All Texts
• Smithsonian Libraries
• FEDLINK (US)
• Genealogy
• Lincoln Collection

Top

• American Libraries
• Canadian Libraries
• Universal Library
• Project Gutenberg
• Children's Library
• Biodiversity Heritage Library
• Books by Language
• Additional Collections

Video

TV News Understanding 9/11

Featured

• All Video
• Prelinger Archives
• Democracy Now!
• Occupy Wall Street
• TV NSA Clip Library

Top

• Animation & Cartoons
• Arts & Music
• Computers & Technology
• Cultural & Academic Films
• Ephemeral Films
• Movies
• News & Public Affairs
• Spirituality & Religion
• Sports Videos
• Television
• Videogame Videos
• Vlogs
• Youth Media

Search the history of more than 1 trillion web pages.

Search the Wayback Machine Search icon An illustration of a magnifying glass.

Mobile Apps

• Wayback Machine (iOS)
• Wayback Machine (Android)

Browser Extensions

• Chrome
• Firefox
• Safari
• Edge

Archive-It Subscription

• Explore the Collections
• Learn More
• Build Collections

Save Page Now

Capture a web page as it appears now for use as a trusted citation in the future.

Enter a URL to save

Please enter a valid web address

• About
• Blog
• Events
• Projects
• Help
• Donate
• Contact
• Jobs
• Volunteer

• Sign up for free
• Log in

Search metadata Search text contents Search TV news captions Search radio transcripts Search archived web sites Advanced Search

• About
• Blog
• Events
• Projects
• Help
• Donate Donate icon An illustration of a heart shape
• Contact
• Jobs
• Volunteer

Full text of "Cisco IOS firmware images"

See other formats

Callgen User Manual Release 4.2T Cisco Company Confidential Document Revision 1.1 Last Modified: 1/5/05 CONTENTS Chapter 1 Introduction 1-1 Overview 1-1 Chapter 2 Quick Start 2-1 Generating a Series of Originate Calls 2-1 Placing Multiple, Simultaneous VoIP Calls 2-4 Originating and Terminating Multiple, Simultaneous PRI Calls 2-7 Chapter 3 Using Callgen 3-1 Hardware Requirements 3-1 Security Issues 3-1 Command Line Prompt Mode 3-2 Callgen Mode 3-2 Channel Mode 3-2 Class Mode 3-3 Global Mode 3-3 Exiting a Mode 3-3 Returning to the IOS Exec Prompt 3-4 Entering Commands from the IOS Exec Prompt 3-4 Saving and Loading Callgen Configurations 3-4 Saving a Configuration to IFS 3-4 Loading a Configuration from IFS 3-5 Logging Messages 3-6 Logging Options 3-6 Setting the Log Size 3-7 Displaying Log Messages 3-7 Debugging Options 3-7 Technical Support 3-10 Defect Notification and Feature Requests 3-11 Chapter 4 Configuring Channels 4-1 Creating Channels 4-1 Deleting Channels 4-3 Disabling Channels 4-3 Associating a Channel with an Interface 4-3 Call Timing Parameters 4-4 Specifying the Length of a Call 4-4 Delaying Call Generation 4-4 Specifying the Time Between Calls 4-5 Delaying the Time Between Starting Calls 4-5 Required Delay Time Between Starting Calls 4-5 Specifying the Number of Calls to Place 4-6 Delaying the Start Between Channels 4-6 Cisco Company Confidential Contents iii How the Time Parameters Work Together 4-6 Displaying Channel Configurations 4-7 Configuring Channel Pairs 4-8 Pairing a Range of Channels 4-8 Using Channel Pairing for Bi-directional Testing 4-8 Configuring Early Disconnected Calls 4-9 Configuring Thresholds 4-9 Enabling Standard Deviation 4-10 Creating Classes 4-11 Deleting Classes 4-11 Overriding Class Parameters 4-11 Auto Called/Calling Number Generation 4-12 Displaying Channel Information 4-12 show report 4-15 Displaying Threshold Information 4-16 show log threshold 4-17 Chapter 5 Placing Calls 5-1 Starting Call Generation 5-1 Stopping Call Generation 5-2 Clearing Call Statistics Before Placing Calls 5-2 Displaying Call Statistics 5-3 Displaying Aggregate Statistics 5-3 Chapter 6 Voice Call Type Module 6-1 Voice CTM Configuration Parameters 6-1 Hanging Up a Call 6-1 Specifying the Calling Address 6-1 Specifying a Redirecting Number 6-2 Specifying Setup Timeout 6-2 Specifying Tear-down Timeout 6-2 Setting the Ringing Duration 6-2 Detecting Call Progression Tones (CPtone) 6-3 Configuring Call Progression Tone Detection 6-3 Configuring Custom Call Progression Tones in IOS 6-4 Defining a Call Script 6-4 Call Script Commands 6-4 Examples 6-5 wst Script Command 6-6 dat Script Command 6-7 Specifying a Timeout Value for Script Commands 6-8 Executing a Call Script On Demand 6-8 iv Callgen User Manual Cisco Company Confidential Path Confirmation 6-8 Specifying 3-Tone Slope 6-9 Specifying Continuity Test (COT) Path Confirmation 6-10 Specifying Error Tolerance 6-11 Specifying Error Threshold 6-11 Specifying Time Terminate Channel Waits to Send Path Confirmation 6-11 Specifying Length of Time to Wait for a Tone 6-12 Specifying Delay Between Tones 6-12 Specifying Tone Duration 6-12 Specifying Tone Tolerance 6-13 Setting the Delay After a Tone 6-13 Testing Transmission Quality of UUTs 6-13 Things to Note When Using Path Confirmation 6-13 FXO Loop-start Emulation 6-14 Q.SIG Messaging 6-14 ISDN Overlap Dialing 6-15 Making Calls Using SIP 6-16 Measuring End-to-End Jitter 6-18 Measuring End-to-End Delay 6-19 Measuring Round-Trip Time 6-21 Measuring Echo 6-22 Logging Out-of-Bound Latency Measurements 6-23 Logging Voice Quality Measurement Values Externally 6-23 Clearing Voice Quality Statistics 6-24 PSQM 6-24 Measuring Speech Quality Using PSQM 6-24 Setting Up a PSQM Server 6-27 Running the Server 6-28 Reviewing Results 6-29 Creating an Audio Test File 6-31 Viewing Voice Quality Statistics 6-31 PESQ 6-32 Measuring Speech Quality Using PESQ 6-32 Setting Up a PESQ Server 6-36 Running the Server 6-36 Reviewing Results 6-37 Creating an Audio Test File 6-37 Viewing Voice Quality Statistics 6-37 E911 Calls on an Analog Interface 6-38 Sample Configuration of a CAMA Port 6-39 Sample Configuration on a Terminating Callgen Router 6-39 Skinny IP Phone Simulation 6-39 Simulating Two IP Phones 6-40 Simulating Multiple IP Phones 6-42 Cisco Company Confidential Contents v Configuring IP Phone Failover with Multiple Call Managers 6-43 Configuring an IP Keyswitch 6-43 Configuring Cisco Call Manager 6-44 SIP IP Phone Emulation 6-44 Configuring SIP Phones 6-44 Configuring Cisco SIP SRST Registrar 6-45 Registering and Unregistering SIP Phones 6-45 Example of SIP to SIP Call with 3-tone Path Confirmation 6-46 Notes For Generating SIP IP Phone Emulation Load Test 6-47 Interface Specifications 6-48 Call Disconnect Codes 6-48 Chapter 7 Data Call Type Module 7-1 Typical Test Scenarios 7-1 Using the Data CTM 7-1 Data CTM Configuration Parameters 7-2 Specifying the Source Address 7-2 Specifying a Source Port 7-2 Specifying a Destination Address 7-2 Specifying a Destination Port 7-2 Specifying the DDR Interface 7-3 Defining the Packet Rate 7-3 Defining Packet Frame Size 7-3 Defining the Data Pattern 7-3 Specifying Setup Timeout 7-3 Specifying Teardown Timeout 7-4 Specifying Intercall Delay 7-4 Specifying Automatic Increment of Source/Destination IP Addresses 7-4 Configuring Path Confirmation for Modem Calls 7-5 Performing FTP Over Async/Dialer Cards 7-6 Generating TCP Traffic 7-6 Modem Configuration Example 7-8 ISDN Configuration Example 7-9 Creating a Data CTM IOS Configuration 7-10 Specifying the Host 7-10 Enabling Chat Scripts 7-10 Specifying the Interface 7-11 Specifying the Serial D Channel Interface 7-11 Specifying Group Async Interface 7-11 IOS Configuration Issues 7-12 Making an ISDN Data Call 7-12 Making a Modem Call 7-13 Data CTM Channel Status 7-13 Troubleshooting the Data CTM and Related DDR Configurations 7-14 vi Callgen User Manual Cisco Company Confidential Chapter 8 Fax Call Type Module 8-1 Specifying the Fax Interface Type 8-1 Common Fax CTM Configuration Parameters 8-1 Specifying the Calling and Called Numbers 8-2 Specifying Payload Transmission 8-2 Specifying Payload Reception 8-2 Verifying Page Count 8-3 Verifying Size 8-3 Specifying Size Tolerance 8-3 Specifying the Starting Called Number by Class 8-4 Specifying the Starting Calling Number by Class 8-4 Specifying the Increment for Generating Called Numbers by Class 8-5 Specifying the Increment for Generating Calling Numbers by Class 8-5 Using Libretto 8-5 Callgen Configuration Commands 8-5 Configuring Libretto on Cisco IOS 8-6 Libretto Debug Commands 8-7 Displaying Libretto Channel Status 8-7 Quality of Fax 8-8 Configuring Allegro on Cisco IOS 8-9 Allegro ISDN, Modem, and Dialer Configurations Displaying Allegro Channel Status 8-10 Placing Fax Calls on Analog Interfaces 8-11 Cisco Company Confidential Contents vii viii Callgen User Manual Cisco Company Confidential CHAPTER 1 Introduction Callgen is an IOS-based bulk-call tool that generates voice calls over Tl/El PRI/CAS, analog, VoIP, and VoFR interfaces. It currently runs on 1760, 3640, 3660, 3725, 3745, 5400, 5850, and 7200 router/access servers. Callgen places fax calls on both analog (FXO and FXS ports) and digital interfaces (Tl/El) using libretto code. Callgen is designed as a generic bulk-call generator so that it can be extended to incorporate other call types, some of which are not strictly in the telephony/dial area, for example, IP-based video streams. Overview The following diagram shows a high-level view of Callgen’s major functional blocks: the parser, controller, and one or more call type modules (CTMs). Callgen Parser (Configuration, Control) Callgen Controller (Call scheduling, Channel control, etc) • Parser—Callgen uses the IOS command-line parser for all user interaction. However, the User Interface API (UIAPI) has been designed for developing other user interfaces in the future, such as a web front end. • Controller—This runs as a separate IOS process and is responsible for receiving configuration and control commands from the user, scheduling the execution of all calls, and collecting various call-specific and global statistics. Cisco Company Confidential Introduction 1-1 Overview • Call Type Module—The CTMs provide a modular way to capture all the call type-specific behavior. They are implemented as a separate subsystem within IOS. The Call Type API (CTAPI) is defined to describe the way in which the Callgen controller and CTMs communicate. This release of Callgen includes voice, data, and fax CTMs. A dummy CTM is also included for testing purposes. Note The Callgen show version command gives information about the versions of the controller and all registered call type modules. Callgen uses the concept of channels to generate calls. Each channel represents a single caller; only one call can occur at a time on a channel. Using configuration parameters, you define the type of call placed on the channel and whether it is a originating or terminating channel. Each channel has a specific call type, such as voice, data, or fax. Each call type has it own configuration parameters. For information on how to configure channels, see Chapter 4, “Configuring Channels.” The next chapter contains a few examples for getting started using Callgen. For more information on how to use Callgen commands, hardware and security requirements, and logging capabilities, see Chapter 3, “Using Callgen." 1-2 Callgen User Manual Cisco Company Confidential CHAPTER 2 Quick Start This chapter provides a quick overview of how to use Callgen through a few simple examples. Generating a Series of Originate Calls This example generates a sequence of calls. It uses a special Callgen call type called “dummy,” created to aid internal testing during Callgen development. Dummy places calls that do nothing but pretend to connect, wait a specified amount of time, and then hang up. This example provides an overview of running Callgen and introduces certain basic concepts. It also offers a quick introduction to the Callgen user interface. Step 1 Load the Callgen IOS image into the router. After booting the IOS image, you should see a message similar the following: CISCO CONFIDENTIAL. DO NOT COPY OR DISTRIBUTE WITHOUT AUTHORIZATION. WARNING: You have loaded a Callgen IOS image. Only secure Callgen images with license key may be run outside of Cisco facilities. If you missed the boot banner message, to make sure you are running a Callgen-enabled image issue a simple Callgen command from the IOS exec prompt, for example, show version: clash-5300# callgen show version Callgen Version: 3.0.0 Controller Version: 2.0.0 VoiceCTM Version: 2.2.0 DummyCTM Version: 1.0.0 FaxCTM Version: 2.1.0 DataCTM Version: 1.1.0 clash-5300# Step 2 Enter callgen at the IOS exec prompt to go to Callgen command mode: wizards-3640# callgen wizards-3640 (callgen) # Step 3 Add a “dummy, originate” channel to place the call. Cisco Company Confidential Quick Start 2-1 Generating a Series of Originate Calls The channel is the basic building block within Callgen and represents a single endpoint capable of originating or terminating calls. Each channel has a type (for example, voice, fax, modem) and a mode (originate or terminate). If neither are specified, the channel defaults to voice, originate. To add a dummy, originate channel: wizards-3640(callgen)# channel 1 type dummy wizards-3640(cgch_l_du_o)# Each channel is identified by a number. In this case, we have arbitrarily chosen “1” for the channel number. Any number from 1 to 10000 is valid. Channels do not have to be added or defined in any particular order. After you enter the channel command, the prompt changes to channel mode. Any subsequent configuration commands apply to the specified channel. The “du” in the prompt indicates that this channel is of type “dummy.” The “o” indicates that this is an “originate” channel (the default). Step 4 Configure the channel to place calls at a rate of 10 per minute, with each call lasting 3 seconds: wizards-3640(cgch_l_du_o)# rate 10 per minute wizards-3640(cgch_l_du_o)# duration 3 seconds Step 5 Verify the Callgen configuration using the show config command: wizards-3640(cgch_l_du_o)# show config channel 1 type dummy mode originate rate 10 per minute duration 3 seconds wizards-3640(callgen) # Step 6 Begin placing calls for a total of 10 minutes. wizards-3640(callgen)# start test-duration 10 minutes The goal here is to place 10 calls per minute, for a total of about 100 calls. Each call will connect, last 3 seconds, and then hang up. Approximately 3 seconds later (the rate of 10 per minute indicates a call placed once every 6 seconds: 3 seconds of call duration, plus 3 seconds idle), the next call will be placed. Note If this were a real call, such as voice, you would need to supply more information before actually placing calls, such as the outgoing interface and the number you are calling. Step 7 Periodically check the status using the Callgen show command. The following output confirms the 3-second hold time and the 3-second average idle time for each call. A call’s idle time is when the channel is not actively in a call. wizards-3640(callgen)# show Aggregate Call Statistics Elapsed time of session: 36176ms and counting Originate Statistics max# of concurrent calls: 1 active channels: 1 of 1 setup attempts: 7 accepts: 6 confirms: 0 2-2 Callgen User Manual Cisco Company Confidential Generating a Series of Originate Calls setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 setup rate: 0 calls per millisecond accept rate: 0 calls per millisecond setup time: : min: : 0ms, max: 0ms, avg: 0ms hold time: min: 3000ms, max: 3000ms, avg: 3000ms disconnect time: : min: 0ms, max: 0ms, avg: 0ms idle time: min: 3000ms, max: 3000ms, avg: 3000ms Terminate Statistics active channels: 0 of 0 setup attempts: 0 accepts: 0 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 setup rate: 0 calls per millisecond accept rate: 0 calls per millisecond hold time: min: Oms, max: 0ms, avg: 0ms The output also displays how many originate and terminate channels have been defined and are active, and indicates the total number of call attempts and accepts. A Callgen router can have both originate and terminate channels active simultaneously, and call statistics are aggregated separately for originate and terminate channels. Dummy calls are fake and are automatically answered. If these were real calls, you would have to have a device to accept and terminate the call. This could be Callgen, either running on the same or a different router, a telephony device, or a loopback dial peer. After 10 minutes, we can confirm that the expected 100 calls were generated and accepted. We also see that the channel is no longer active and that the session lasted for 10 minutes (600,000 msec). All the calls were answered: setup attempts (100) equals accepts (100). wizards-3640(callgen)# show Aggregate Call Statistics Elapsed time of session: 600000ms Originate Statistics max# of concurrent calls: 1 active channels: 0 of 1 setup attempts: 100 accepts: 100 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 setup rate: 0 calls per millisecond accept rate: 0 calls per millisecond setup time: min: 0ms, max: 0ms, avg: 0ms hold time: min: 3000ms, max: 3000ms, avg: disconnect time: min: 0ms, max: 0ms, avg: idle time: min: 3000ms, max: 3000ms, avg: Terminate Statistics active channels: 0 of 0 setup attempts: 0 accepts: 0 3000ms 0ms 3000ms Cisco Company Confidential Quick Start 2-3 Placing Multiple, Simultaneous VoIP Calls confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 setup rate: 0 calls per millisecond accept rate: 0 calls per millisecond hold time: min: Oms, max: 0ms, avg: 0ms Placing Multiple, Simultaneous VoIP Calls The following example places voice over IP (VoIP) calls from a 3640 router to a 2600 router with a loopback dial peer. Using the dial-peer loopback mechanism in Symphony to “wrap” the voice path back to the originator is one way to terminate calls. This example places three simultaneous VoIP calls to three different numbers, each having different characteristics. Oj Callgei -0 rig Hat 172.1831.7 [tl I OOOOOO I I OO I Deufc* UiderTest wizards-36 U] 172.1831.11 •u jC LU _K 2611 _ •+—» 0 1 tl 0 1 1 q 031 If- p d tv C 3 1 ij i y\ — < uaie enriiiaea'iocpeal csd nr Wnpicrv 1 M Called numbers: 555-1000 555-2000 555-3000 The characteristics of the calls are: • Channel 1: Calls to 555-1000 at a rate of 60 call attempts per hour, each lasting 1 minute • Channel 2: Calls to 555-2000 at a rate of 3 per minute, each with a random duration between 5 and 15 seconds • Channel 3: Calls to 555-3000, started 5 minutes into the run (after Channel 1 and 2 have started), at a rate of 3 per hour, each lasting 5 minutes Step 1 Create a dial peer. Before we can originate or terminate VoIP calls or any type of VoXX call, we must first create a dial peer as part of the router’s configuration. The dial peer contains information on how calls are placed over the IP or packet network, such as the address of the call target and desired CODEC. We then specify this dial peer in Callgen’s interface command. This is the dial peer we are using for our example: dial-peer voice 100 voip session target ipv4:172.18.31.11 2-4 Callgen User Manual Cisco Company Confidential Placing Multiple, Simultaneous VoIP Calls Step 2 Step 3 Step 4 Step 5 Cisco Company Confidential Configure Callgen on the 3640. Each command is entered at the Callgen mode prompt. wizards-3640(callgen)# show config channel 1 rate 50 per hour duration 1 minutes calling-number 5550001 called-number 5551000 interface voip:100 # Note, '100' corresponds to dial-peer with tag, ' 100 .' channel 2 rate 3 per minute duration random 5 15 seconds calling-number 5550001 called-number 5552000 interface voip:100 channel 3 rate 3 per hour duration 5 minutes start-time-delay 5 minutes calling-number 5550001 called-number 5553000 interface voip:100 Configure the remote 2600 with loopback peers. The dial peers for each of the called numbers are configured as loopback, which indicates that when the Callgen-generated call arrives, it will be answered and the voice path will be looped back to the originator. hostname tte2600 dial-peer voice 1000 voip destination-pattern 5551000 session target loopback:rtp i dial-peer voice 2000 voip destination-pattern 5552000 session target loopback:rtp i dial-peer voice 3000 voip destination-pattern 5553000 session target loopback:rtp Start call generation. We will start just channel 2 for a specified amount of time to make sure that VoIP calls are being placed successfully: wizards-3640(callgen)# start 2 test-duration 10 minutes wizards-3640(callgen)# Check whether calls are being placed with a random hold time between 5 and 15 seconds, using show channel 2. Quick Start 2-5 Placing Multiple, Simultaneous VoIP Calls Channel 2 Call Statistics elapsed channel run time: OOwOdOO:02:35.932 and counting channel state: HOLD setup attempts: 9 accepts: 8 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 setup rate: 3 calls per minute accept rate: 3 calls per minute setup time: min: 228ms, max: 228ms, avg: 228ms hold time: min: 5000ms, max: 14000ms, avg: 10000ms disconnect time: min: 4ms, max: 4ms, avg: 4ms idle time: min: 5768ms, max: 14768ms, avg: 10196ms inter-digit-delay: min: 0ms, max: 0ms, avg: 0ms last disconnect cause: 16 normal call clearing, last abnormal disconnect cause: 0 Script Stopwatch: N/A Channel 2 Current Settings channel type is voice channel mode is originate maximum call rate is 3 calls per minute call duration has a random distribtion with min:5 and max:15 seconds minimum inter-call-delay is 0 seconds start-to-start-delay is 0 seconds start-time-delay is 0 seconds calling-number is 5550001 redirection info is not configured called-number is 5552000 setup-timeout is 300 seconds teardown-timeout is 300 seconds minimum path-confirmation time-out is 15 seconds minimum path-confirmation digit-on-time is 50 milliseconds minimum path-confirmation digit-off-time is 150 milliseconds minimum path-confirmation post-sending-delay is 600 milliseconds path-confirmation type is not configured voice-quality psqm-server is not configured, using udp protocol voice-quality recording path is not configured voice-quality max-audio-silence is 1600 milliseconds voice-quality hit-threshold is 200 milliseconds voice-quality logging latency is off voice-quality phase-locking algorithm is off minimum voice-quality psqm-inter-delay is 5 seconds qsig-message is off qsig-calltype is basic-call interface is voip:100 call script is not configured The output shows that eight calls have been accepted on channel 2, the minimum duration has been 5 seconds, maximum has been 14, and the average was 10 seconds. Step 6 Limit the total number of calls Callgen generates. First, stop channel 2, clear out and reset all counters, and then start all three channels: router(callgen)# stop 2 router(callgen)# clear counters This will reset current statistics of calls, [confirm]y router(callgen)# start total-calls 10000 router(callgen)# 2-6 Callgen User Manual Cisco Company Confidential Originating and Terminating Multiple, Simultaneous PRI Calls Using the start command without specifying a particular channel starts all channels. The total-calls parameter specifies that Callgen places 10,000 calls across the three channels before stopping. Since this can take several hours to complete, use the stop command with no arguments to stop all channels. Originating and Terminating Multiple, Simultaneous PRI Calls This example uses Callgen back-to-back between two 5300 routers using an ISDN Primary Rate Interface (PRI) connection. For actual test scenarios, you would probably have a device or network under test between the two Callgen routers, such as a VoIP or VoATM gateway, or PBX. In this example, a Callgen router named as5300-9 generates voice calls, each lasting 1 second, with 1 second pauses between each call. It does this on 10 of the 23 available B channels. A Callgen router named as5300-8 terminates these calls. +-+ +-+ I as5300-9 111 0 tl 1 I as5300-8 I I callgen NET+-PRI-+ callgen I |originate | I terminate | + - + + - + Note that the D-channel for tl 0 above is configured to be the network side of the connection, otherwise, a switch would be required. To configure tl 0 as the network side, use isdn network, shut, no shut in the D-channel configuration of tl 0, serial0:23, to enable back-to-back connection. We must also make sure that the tl controllers and ISDN signaling are configured properly for voice. Note This example assumes that the basic router configuration of the ISDN PRI interface and D channel are correct and working. The router’s show isdn status command should indicate that all three layers are up and the show controller tl command should not indicate any framing errors after 15 minutes of use. The following shows the relevant router configuration statements: isdn switch-type primary-5ess controller Tl 0 framing esf clock source line primary linecode b8zs pri-group timeslots 1-24 interface Serial0:23 no logging event link-status isdn switch-type primary-5ess isdn protocol-emulate network isdn incoming-voice modem Step 1 Configure the as5300-9 (originate side). Note that on channel 1, we have overridden the class-specified duration of 1 second to be 5 minutes. Channel 1 is also configured to verify that the voice/bearer channel can pass voice traffic and that it has been connected to the right party, using the path-confirmation command to ping the called number in-band via DTMF tones. class pri-orig type voice mode originate duration 1 seconds inter-call-delay 1 seconds called-number 19194721000 Cisco Company Confidential Quick Start 2-7 Originating and Terminating Multiple, Simultaneous PRI Calls interface port:0:D channel 1 class pri-orig calling-number 19191111212 duration 5 minutes path-confirmation type ping called-number channel 2 class pri-orig calling-number 19192221212 channel 3 class pri-orig calling-number 19193331212 channel 4 class pri-orig calling-number 19194441212 channel 5 class pri-orig calling-number 19195551212 channel 6 class pri-orig calling-number 19196661212 channel 7 class pri-orig calling-number 19197771212 channel 8 class pri-orig calling-number 19198881212 channel 9 class pri-orig calling-number 19199991212 channel 10 class pri-orig calling-number 19190001212 Step 2 Configure the as5300-8 (terminate side). class pri-term type voice mode terminate called-number 19194721000 interface port:l:D exit channel 1 class pri-term path-confirmation cut-through-time 2 seconds path-confirmation type ping called-number channel 2-10 class pri-term The path-confirmation cut-through-time command on channel 1 delays the start of the configured pings by 2 seconds to take into account that the call might be connected on the terminate side from a signalling perspective but the originate side might not be able to receive any in-band traffic for a short amount of time. If either side does not receive the ping, or the wrong digits are received, the path confirmation failures counter increments. 2-8 Callgen User Manual Cisco Company Confidential CHAPTER 3 Using Callgen This chapter describes how to use Callgen, including the different Callgen command modes and logging and debugging facilities. Hardware Requirements Voice, fax, and data call generation require the following: • 5300—One to two Voice Feature Cards (VFC) (stop support after v4.1T) • 5400—One NP Voice Feature Card • 5350—Supports Tl/El digital voice card • 3600—Up to 12 FXS, FXO, E&M VIC cards or up to six digital voice cards • 3700—Up to 8 FXS, FXO, E&M VIC cards or up to four digital voice cards • 5800—One to two 192-DSP voice cards (stop support after v3.2 T) • 5850—Supports Tl/El, T3 • 7200—Up to six digital voice cards Fax calls can also be generated using Microcom modems. Data call generation requires MICA modems. Security Issues Starting with Callgen 2.2, all released Callgen images enforce a security key checking before starting IOS. This protection prevents Callgen images being given to customers without first registering the machine ID. To obtain a security key, go to http://wwwin-vts.cisco.com/protected-cgi/get kev.cgi . This centralized database of machine IDs helps us track the distribution of Callgen images as well as provide statistics on each platform. Note Giving customers Callgen images without the Network Verification Services (NVS) contract is against the rules of Cisco Systems’ intellectual property (confidential) copyright act. Cisco Company Confidential Using Callgen 3-1 Command Line Prompt Mode Command Line Prompt Mode Callgen uses the IOS parser to accept configuration and control commands. All the IOS parser features (command completion, history, context-sensitive help, emacs-style editing, and so on) work exactly the same way in Callgen as they do at the IOS exec prompt. To use the callgen commands, either prefix the command with the word callgen at the IOS exec prompt or type the command from within one of the following callgen modes. Note By default, Callgen changes the prompt to identify channel or class name when in channel or class mode. To force Callgen to use fixed prompts in these modes, use the set prompt static command. To change back to the default, use set prompt dynamic. Callgen Mode Callgen mode is the main mode, used to control Callgen operations, turn on debugs, and show configuration and statistics.To enter callgen mode, type callgen at the IOS exec prompt: router# callgen router(callgen)# Note Callgen is a single-user tool that is invoked from the router console on which it is running. Future versions will include code to ensure that only one user is logged into the router and actively using callgen. Channel Mode Channel mode is used to configure channel-specific parameters. You can enter channel mode in one of two ways: • From the IOS exec prompt by entering callgen channel num, where num is the channel number you are defining: router# callgen channel 4 router(cgch_4_vo_o)# • From callgen mode by entering channel num, where num is the channel number you are defining or editing: router(callgen)# channel 5 router (cgch_5_vo_o) # The channel mode prompt reflects the current channel number, the call type, and call mode. For example, “cgch” indicates that this is the callgen channel mode, 4 is the channel number, “vo” is the call type (voice), and “o” is the call mode (originate). The current values for type and mode are: Table 3-1 Type and Mode Abbreviations Call Types Call Modes vo—voice call t—terminate du—dummy call o—originate For more information on channels, see Chapter 4, “Configuring Channels.” 3-2 Callgen User Manual Cisco Company Confidential Class Mode Class Mode Class mode is used to configure class-specific parameters. You can enter class mode in one of two ways: • From the IOS exec prompt by entering callgen channel name , where, where name is the 1-15 character class name you are defining: router# callgen class voice router(cgcc_voice_vo_o)# • From callgen mode by entering class name , where name is the 1 to 15 character class name you are defining or editing: router(callgen)# class foobar router(cgcc_foobar_vo_o)# The class mode prompt reflects the current class name, call type, and call mode for the class you are defining. For example, “cgcc” indicates the callgen class mode, “foobar” is the current class name, “vo” is the call type (voice), and “o” is the call mode (originate). Valid type and mode abbreviations are the same as those in channel mode (see Table 3-1 ). For more information on classes, see Creating Classes (page 4-11) . Global Mode Global mode is used to configure call-type-specific global definitions of parameters used by channels and classes. To enter global mode, type callgen global type call-type mode call-mode in callgen mode. For example: router(callgen)# global type voice mode originate router(cgset_vo_o)# The global mode prompt reflects the current call type and call mode. For example, “cgsef' indicates the callgen global mode, “vo” is the call type (voice), and “o” is the call mode (originate). Valid type and mode abbreviations are the same as those in channel mode (see Table 3-1 ). For some call types, you do not need to specify the call mode to enter global mode. In this case, the prompt specifies “all,” indicating that the global definitions apply to both originate and terminate modes. For example: router(callgen)# global type voice router(cgset_vo_all)# Exiting a Mode To drop back to the previous mode, use the exit command. For example: clash-5300(cgch_4_vo_o)# exit clash-5300(callgen)# All current Callgen configuration and state information is saved even if you exit out of callgen mode back to the IOS exec prompt. Channels continue originating and terminating calls, statistics are updated, and so on. Cisco Company Confidential Using Callgen 3-3 Saving and Loading Caiigen Configurations Returning to the IOS Exec Prompt To go to the IOS exec prompt regardless of the current callgen mode, use the end command. For example: clash-5300(cgch_4_vo_o)# end clash-5300# Entering Commands from the IOS Exec Prompt You can run any callgen command from the IOS exec prompt by proceeding the command with callgen. After the command executes, you return to the IOS exec prompt. For example, if you enter callgen show version at the IOS exec prompt, the current callgen version is displayed without entering callgen mode. Entering callgen channel 64 inter-call-delay 10 seconds from the IOS exec prompt performs the exact same function as entering callgen channel 64 to get into channel mode, followed by a separate inter-call-delay 10 seconds command. Saving and Loading Callgen Configurations You can save and load Callgen configurations to the IOS File System (IFS). Saving a Configuration to IFS save-config url Saves the Callgen configuration to IFS. The saved configuration can be loaded later with the load-config command. Examples If you enter save-config ?, the program displays which file systems are available on the router. (callgen)#save-config ? bootflash: Save config to bootflash: diskO: Save config to diskO: diskl: Save config to diskl: flash: Save config to flash: lex: Save config to lex: null: Save config to null: nvram: Save config to nvram: pram: Save config to pram: rep: Save config to rep: slavebootflash: Save config to slavebootflash slavenvram: Save config to slavenvram: slaveslot0: Save config to slaveslotO: slaveslot1: Save config to slaveslot1: slotO: Save config to slotO: slotl: Save config to slotl: system: Save config to system: tftp: Save config to tftp: If you enter just the file system name, the program prompts you for the remaining information. For example, if you want to save the configuration to TFTP server 192.1.1.2 and to the filename /tftpboot/test/filters. (callgen)#save-config tftp Address or name of remote host []? 192.1.1.2 IFS filename []? test/filters i i Save complete. 3-4 Callgen User Manual Cisco Company Confidential Loading a Configuration from IFS If the complete URL is entered, the program does not prompt for more information. In a TCL script, you must use the complete URL, because CSCCON does not know how to respond to callgen IFS prompts. The following example shows using the command from the router exec with a complete URL. (callgen)#save-config tftp://192.1.1.2/test/filters I I Save complete. Loading a Configuration from IFS load-eonfig url Loads a Callgen configuration file from IFS. It first deletes all existing Callgen configurations. It then reads in and executes the commands in the requested configuration file to create a new Callgen configuration. The Callgen configuration file was created with the save-config command. Examples If you enter load-config ?, the program displays which file systems are available on the router: (callgen)#load-config ? bootflash: Load config from bootflash: diskO: Load config from diskO: diskl: Load config from diskl: flash: Load config from flash: null: Load config from null: nvram: Load config from nvram: pram: Load config from pram: rep: Load config from rep: slavebootflash: Load config from slavebootflash slavenvram: Load config from slavenvram: slaveslotO: Load config from slaveslotO: slaveslot1: Load config from slaveslot1: slotO: Load config from slotO: slotl: Load config from slotl: system: Load config from system: tftp: Load config from tftp: (callgen)#load-config If you enter just the file system name, the program prompts you for the remaining information. For example, if you want to load a filter from TFTP server 192.1.1.2, and read the file /tftpboot/test/filters. (callgen)#load-config tftp Address or name of remote host []? 192.1.1.2 IFS filename []? test/filters Please wait until 'Load Complete' message. (callgen)# Loading test/filters from 192.1.1.2 (via EthernetO/O/O): ! [OK - 2360/4096 bytes] Load Complete. If the complete URL is entered, the program does not prompt for more information. In a TCL script, you must use the complete URL, because CSCCON does not know how to respond to Callgen IFS prompts. Cisco Company Confidential Using Callgen 3-5 Logging Messages Logging Messages You can have Callgen messages logged to an external server using the IOS Syslog messaging feature. To use this feature, start syslog daemon on the external server and configure IOS to send messages to the server. Callgen sends its messages to IOS, and IOS logs them to the server. The following is an example of how to set up the IOS configuration: cg-5300-3#conf t Enter configuration commands, one per line. End with CNTL/Z. cg-5300-3(config)#logg on cg-5300-3(config)#logg 10.0.1.51 cg-5300-3(config)#logg facility localO cg-5300-3(config)#logg trap debugg cg-5300-3(config)#end For more information on IOS message classification, formats, and the above commands, see http://www.cisco.com/univercd/cc/td/doc/cisintwkyintsolns/dialnms/syslog.htm. For information on configuring and starting syslog daemon on the external server, see http://www.cisco.eom/univercd/cc/td/doc/cisintwk/intsolns/dialnms/syslog.htm#xtocid228378. The following is a sample output from the external server regarding Callgen messages: Mar 27 16:56:37 [10.0.2.8.208.173] 30: 21:55:40: %SYS-5-C0NFIG_I: Configured from console by console Mar 27 16:56:59 [10.0.2.8.208.173] 31: 21:56:02: %CALLGEN_MSG-7-DEBUG: << Entered newVoice» Mar 27 16:56:59 [10.0.2.8.208.173] 32: 21:56:02: %CALLGEN_MSG-7-DEBUG: << Exited newVoice (0) >> Mar 27 16:57:03 [10.0.2.8.208.173] 33: 21:56:08: %CALLGEN_MSG-7-DEBUG: << Entered setParameter» Mar 27 16:57:03 [10.0.2.8.208.173] 34: 21:56:08: %CALLGEN_MSG-7-DEBUG: << Exited setParameter (0) >>c To see the messages on the console, use the command logging console in IOS config mode. To log messages to the external server, use the logging ip_address command in addition to the ones described above. To stop logging messages to the external server, use the no logging ip_address command. Callgen maintains a timestamped log of messages that have occurred since the last clear log command. You can also log server radius messages. By default, Callgen only displays and records messages considered to be errors. Like IOS debug commands, you can prevent Callgen messages from appearing on the console using the global configuration command no logg console debug message: router# config t router(config)# no logg console debug Logging Options To control the types of messages you get, use the following commands. set log verbosity error Displays and records error messages only (the default). set log verbosity warn Displays and records error messages or significant events only. set log verbosity info 3-6 Callgen User Manual Cisco Company Confidential Setting the Log Size Displays and records any messages, including those that indicate normal and routine state transitions. set log radius {on I off} Turns logging radius server messages on or off. The default is off. This log buffer is also emptied when use the clear log command. Setting the Log Size Callgen maintains a buffer up to n K bytes of log messages. Once the buffer becomes full, a warning message is displayed and no more messages are recorded. Use the callgen set log size command to specify the number of K (1024) bytes that Callgen will preserve. Displaying Log Messages Use the show log and show log radius commands to display messages. To only display the messages containing a specific string, use show log grep string. For example, show log produces the following output: wizards-3640(callgen)# show log ErrMod_05:22:45.282 Error Log Verbosity set to 2 CH1_05:23:27.206 control(start): instance 3 received duration of 3 sec, 3000 msec. CH1_05:23:30.206 finishDummyCall(): instance 3 state: 'teardown', callStatus: 'accepted', callError: 'no-error', setupTime:0 msecs, activeTime:3000 msecs, teardownTime:0 msecs CH1_05:23:30.206 control(start): instance 3 received duration of 3 sec, 3000 msec. CH1_05:23:33.206 finishDummyCall(): instance 3 state: 'teardown', callStatus: 'accepted', callError: 'no-error', setupTime:0 msecs, activeTime:3000 msecs, teardownTime:0 msecs CH1_05:23:33.206 control(start): instance 3 received duration of 3 sec, 3000 msec. CH1_05:23:36.206 finishDummyCall(): instance 3 state: 'teardown', callStatus: 'accepted', callError: 'no-error', setupTime:0 msecs, activeTime:3000 msecs, teardownTime:0 msecs CH1_05:23:36.206 control(start): instance 3 received duration of 3 sec, 3000 msec. CH1_05:23:39.206 finishDummyCall(): instance 3 state: 'teardown', callStatus: 'accepted', callError: 'no-error', setupTime:0 msecs, activeTime:3000 msecs, teardownTime:0 msecs CH1_05:23:39.206 control(start): instance 3 received duration of 3 sec, 3000 msec. CH1_05:23:42.206 finishDummyCall(): instance 3 state: 'teardown', callStatus: 'accepted', callError: 'no-error', setupTime:0 msecs, activeTime:3000 msecs, teardownTime:0 msecs ErrMod_05:26:20.994 Error Log Size set to 65536 bytes Here is sample output generated by executing show log radius: cg-5300-5(callgen)#show log radius 16 08 19.575 Client-id: 110.1.0.1 Client-port-id: CHI Status: Setup 16 08 19.675 Client-id: 110.1.0.1 Client-port-id: CHI Status: Active 16 08 34.675 Client-id: 110.1.0.1 Client-port-id: CHI Status: Disconnect 16 08 34.687 Client-id: 110.1.0.1 Client-port-id: CHI Status: InActive Debugging Options Callgen has three types of debugs that you can optionally turn on: controller, parser, or CTM. Use the debug options only if needed to debug certain Callgen operational problems, because debugging can impact the system. Debugging should not be used on systems with heavy call generation volume. Cisco Company Confidential Using Callgen 3-7 Debugging Options To view the available debug options, use debug ?: clash-5300(callgen)# debug ? ctlr Debug controller ctm Debug call type module parser Debug callgen CSB and parm blocks Turn debugging on with the debug type command: clash-5300(callgen)# debug ctlr Callgen controller debug enabled Turn debugging off with the no debug type command: clash-5300(callgen)# no debug ctlr Callgen controller debug disabled To view the current debug level settings, use the show debug command: router(callgen)# show debug Parser debug disabled Controller debug disabled CTM debug disabled To help the technical support efforts, the command show debug all has been implemented. This command displays the output of the following commands all at once: show running (IOS), show version (IOS), show version (Callgen), and show eonfig (Callgen). Or you can just use show report, capture the output, and send it to callgen-support (see show report (page 4-15) . For example: router(callgen)#sh debug all IOS RUNNING CONFIGURATION Building configuration... Current configuration: version 12.1 service timestamps debug uptime service timestamps log uptime no service password-encryption i hostname cg-train-7 no logging console enable password lab memory-size iomem 25 voice-card 2 ip subnet-zero ip host CALLGEN-SECURITY-V2 21.63.69.5 0.90.0.0 ip host boot 10.0.2.10 ip dhcp smart-relay i cns event-service server 3-8 Callgen User Manual Cisco Company Confidential Debugging Options controller T1 2/0 framing esf linecode b8zs dsO-group 1 timeslots 1-24 type e&m-wink-start i controller T1 2/1 framing esf linecode b8zs dsO-group 1 timeslots 1-24 type e&m-wink-start interface Ethernet0/0 no ip address shutdown no cdp enable i interface Ethernet0/1 ip address 10.0.2.37 255.255.255.0 no cdp enable interface EthernetO/2 no ip address shutdown no cdp enable interface EthernetO/3 no ip address shutdown no cdp enable ip kerberos source-interface any ip classless ip route 10.0.2.0 255.255.255.0 Ethernet0/0 no ip http server i dialer-list 1 protocol ip permit dialer-list 1 protocol ipx permit voice-port 1/0/0 i voice-port 1/0/1 i voice-port 1/1/0 i voice-port 1/1/1 i voice-port 2/0:1 voice-port 2/1:1 i i line con 0 exec-timeout 0 0 transport input none line aux 0 line vty 0 4 login i end Cisco Company Confidential Using Callgen 3-9 Technical Support IOS VERSION Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-TCGEN-M), ExperimentalVersionl2.1(20000710:205900) [afaruqui-ddts 100] Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Mon 10-Jul-00 13:59 by afaruqui Image text-base: 0x60008948, data-base: 0x614FC000 ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE(fcl) ROM: 3600 Software (C3640-TSCGEN-M), Experimental Version 12.1(20000313:033814)[spchang-callgen2_2 240] cg-train-7 uptime is 21 hours, 40 minutes System returned to ROM by reload System image file is "tftp://10.0.2.10/afaruqui/c3640-tcgen-mz" cisco 3640 (R4700) processor (revision 0x00) with 49152K/16384K bytes of memory. Processor board ID 17632726 R4700 CPU at lOOMhz, Implementation 33, Rev 1.0 Bridging software. X.25 software. Version 3.0.0. SuperLAT software (copyright 1990 by Meridian Technology Corp). TN3270 Emulation software. Primary Rate ISDN software. Version 1.1. 4 Ethernet/IEEE 802.3 interface(s) 2 Channelized Tl/PRI port(s) 4 Voice FXO interface(s) DRAM configuration is 64 bits wide with parity disabled. 125K bytes of non-volatile configuration memory. 32768K bytes of processor board System flash (Read/Write) Configuration register is 0x0 CALLGEN VERSION INFORMATION Callgen Version: 2.2.0 Controller Version: 2.0.0 VoiceCTM Version: 2.2.0 DummyCTM Version: 1.0.0 DataCTM Version: 1.1.0 CALLGEN CONFIGURATION class v type voice mode originate start-called-number 514000 channel 1 class v called-number 514000 voice-quality type psqm audio-file 1 no-sync Technical Support Please send support questions to [email protected] . For general questions and informal discussions among other Callgen users, send email to [email protected] . For a concise summary of all Callgen commands, refer to the Callgen Command Reference Card . All Callgen documents, images, and updates are located at http://wwwin-vts.cisco.com/bulkCall . To help the technical support efforts, the command show debug all has been implemented. This command displays the output of the following commands all at once: show running (IOS), show version (IOS), show version (Callgen), and show config (Callgen). Or you can use show report. 3-10 Callgen User Manual Cisco Company Confidential Defect Notification and Feature Requests which displays the output of the following commands: show aggregate (Callgen), show config (Callgen), and show running (IOS). Also, the commands show log and show channel also provide good information. Please capture as much information as possible and send it to callgen-support. Defect Notification and Feature Requests A list of the current defects is on the Known Callgen Defect (QDDTS query) page. Check here to make sure that the defect you want to report is not on the list. To report a new defect in either Callgen or this documentation, or to request a new Callgen feature, open a DDTS in the CSC.labtrunk project with a component name of callgen. Cisco Company Confidential Using Callgen 3-11 Defect Notification and Feature Requests 3-12 Callgen User Manual Cisco Company Confidential CHAPTER 4 Configuring Channels In Callgen, channels are the basic building block for placing calls. Each channel represents a single call execution; only one call at a time is occurring on a channel. Channel configuration parameters define the characteristics of the calls placed on the channel. To run multiple simultaneous calls, you configure multiple channels, each with its own set of parameters (call duration, call rate, and so on). This chapter describes the generic configuration options available for all call types. For more information on configuration options for a specific call type, see the sections on the various call type modules. The example below shows three channels, each with a different call duration and inter-call-delay setting. Chan 1 Chan 2 Chan 3 icd = inter-call-delay Creating Channels You can create a channel in either callgen mode (see Channel Mode (page 3-2) ) or from the IOS prompt ( Entering Commands from the IOS Exec Prompt (page 3-4) ).When creating a channel, you can specify the type, mode, or class. You can also specify a range of channels. The syntax is: channel first Number [- lastNumber ] [type type [mode [originate I terminate}]] channel first Number [- lastNumber ] [class name ] firstNumber —A number from 1 to 10000 that identifies the channel. The channel number does not affect the order of how actual calls are generated. Channel numbers do not have to be in sequence; for example, you can define channels 1, 7, 64, 245, and 599. However, it is helpful to group channels numerically. For example, make all voice calls on channels 100 to 199, fax calls on channels 200 to 299, and so on. Cisco Company Confidential Configuring Channels 4-1 Creating Channels lastNumber —The last channel number when defining a range of channels. When specifying a range, you must include spaces between the range value and the hyphen for the command to parse properly. type—The type of call the channel represents. Options are voice, data, fax, and dummy. If not specified, the default is voice. A type is specified when initially creating the channel. To change a channel’s call type, you must delete the channel and add it back again with the new type. Note Callgen also provides configuration commands that apply to a particular call type only. For information on how to configure a specific call type, refer to the chapters on the different call type modules: Chapter 6, “Voice Call Type Module.” Chapter 7, “Data Call Type Module,” and Chapter 8, “Fax Call Type Module.” mode—The call mode, either originate or terminate. Originate channels place calls and terminate channels answer them. If not specified, the default is originate. To change a channel’s mode, you must delete the channel and add it back again with the new mode. class—The name of defined class. Classes offer an efficient way to group configuration parameters together and apply them to a number of channels. For information on creating classes, see Creating Classes (page 4-IT) . Only one class can be assigned to a channel. The channel inherits all the configuration parameters specified in that class. If a class is not specified, the generic default values of parameters are used. To change a channel’s class, you must delete the channel and add it back again with the new class. After a channel is created, you can associate the channel with an interface (see Associating a Channel with an Interface (page 4-3) ) and control the timing of calls (see Call Timing Parameters (page 4-4)) . Note You must specify an interface for voice channels. You can define up to 10,000 channels, but you need to take CPU power, memory, and physical interfaces into account. For example, if you are placing POTS calls on a 3600 and have four physical FXO ports, four channels is sufficient to drive these. Examples Creates a channel of type voice and mode originate: channel 1 Creates 10 channels of type voice and mode originate: channel 1-10 Creates a channel of type voice and mode terminate: channel 45 mode terminate Creates a channel that uses the parameters defined in the class named mycall: channel 3 class mycall 4-2 Callgen User Manual Cisco Company Confidential Deleting Channels Deleting Channels To delete a specified channel, use the prefix no prefix before the channel command: no channel number For example, from callgen mode: router(callgen)# no channel 3 From IOS exec mode: router# callgen no channel 3 You can erase all current channel and class configurations from memory using the callgen clear config command. For example: router(callgen)# clear config This will erase current configuration of Callgen. [confirm]y router(callgen)# Disabling Channels To place a channel into a disabled state, use the shutdown command (this is similar to the way an interface is shutdown in IOS): [no] channel number shutdown The no option enables a channel. By default, newly added channels are placed in a ready (no shutdown) state. To verify the state of configured channels, use the show channel command (see Displaying Channel Information (page 4-12)) . The following example shuts down a channel, displays its status, and then enables it again: clash-5300(callgen)# channel 4 clash-5300(cgch_4_vo_o)# shutdown clash-5300(callgen)# sh chan ch-4-vo-o, state: DOWN, attempts: 0, accepts: 0, confirms: 0, if: , setup-fails: 0, aborts: 0, disconnects: 0, confirm-fails: 0, other-fails: 0 clash-5300(callgen)# no channel 4 shutdown ch-4-vo-o, state: INACTIVE, attempts: 0, accepts: 0, confirms: 0, if: , setup-fails: 0, aborts: 0, disconnects: 0, confirm-fails: 0, other-fails: 0 Associating a Channel with an Interface The interface command associates a channel with a physical interface on which to originate or terminate the call: [no] channel number interface interfacename Valid interfaces depend on the call type and mode of the channel. For instance, some interfaces on the router are capable of generating voice calls, while others are capable of generating modem calls. interface is a required parameter for voice channels. To see a list of valid interfaces for the channel’s type, use the show interface command. For example: Cisco Company Confidential Configuring Channels 4-3 Call Timing Parameters router(callgen)# show interface voice Interfaces supporting voice/originate voip:<dial-peer tag> vofr:<dial-peer tag> port:0:1 port:1:D Interfaces supporting voice/terminate voip:<dial-peer tag> vofr:<dial-peer tag> port:0:1 port:1:D router(callgen) # channel 20 interface port:l:D Call Timing Parameters There are several configuration commands that control the timing of the call for the channel. Specifying the Length of a Call To specify the amount of time a call lasts, use the duration parameter: [no] duration {durationlnSeconds I random [unique-seed] minSeconds maxSeconds} [{minutes I seconds I hours}] For example: router(callgen)# ch 1 router(cgch_l_vo_o)# duration 3 minutes router(callgen)# ch 2- 6 router(cgch_l_vo_o)# duration random unique-seed 30 50 seconds The duration specified does not include the time required to set up or tear down the call, which varies depending on the call type and signaling. You can specify either an absolute value or a random value within a specific range. Units can be specified in seconds, minutes, or hours (the default is seconds). If keyword unique-seed is used together with keyword random in different channels, each channel generates a different pattern of random duration. The default is without unique-seed. A duration of zero immediately disconnects the call once it is established. However, a duration of zero is not recommended for VoIP and analog calls, since the state transition of two ends might not be in sync. The default value for originate channels is 0. The default value for terminate channels is 596 hours. We suggest not configuring duration for terminate channels and instead, allowing the originate channel to hang up the call. This prevents calls from being hung up before the originate channel’s expected duration has expired. If the terminate channel then does hang up before it should, it means that something went wrong with the connection. Note Random duration does not work if configured under the class configuration. Delaying Call Generation The start-time-delay parameter specifies the length of time to wait before call generation on the channel begins after the start or run command is issued. The default is 0. [no] start-time-delay delayInSeconds [{minutes I seconds I hours}] 4-4 Callgen User Manual Cisco Company Confidential Specifying the Time Between Calls For example: cg-train-6(cgch_l_vo_o)#start-time-delay 10 Specifying the Time Between Calls The inter-call-delay parameter specifies the amount of time to wait between placing calls on the same channel. More specifically, it is the amount of time between tearing down the current call and starting to set up the subsequent call. The default is 0. [no] inter-call-delay delaylnSeconds [minutes I seconds I hours}] For example: cg-train-6(cgch_l_vo_o)#inter-call-delay 10 Delaying the Time Between Starting Calls The call-to-call-delay parameter specifies the amount of time between the start of a call to the start of the subsequent call on the same channel. The default is 0. [no] call-to-call-delay delaylnSeconds [{minutes I seconds I hours}] There is a potential conflict between the call-to-call-delay and inter-call-delay parameters. Callgen requires consistent timing configuration when inter-call-delay, duration, and call-to-call-delay are all specified. A valid configuration must equal the following: call-to-call-delay == duration + inter-call-delay. If the duration is random, the following rule applies: min duration + inter-call-delay <= call-to-call-delay <= max duration + inter-call-delay. For example, in the following, the call-to-call delay is 5*60+10: cg-train-6(cgch_l_vo_o)#call-to-call-delay 310 Required Delay Time Between Starting Calls The reqd-call-to-call-delay parameter specifies the maximum amount of time between the start of a call to the start of the subsequent call on the same channel. The default is 0. [no] reqd-call-to-call-delay delay [{minutes I seconds I hours}] There is a potential conflict between reqd-call-to-call-delay and the inter-call-delay and call-to-call-delay parameters, reqd-call-to-call-delay cannot co-exist with these other two parameters. A valid configuration must meet the following condition: reqd-call-to-call-delay >= setup-timeout + duration + teardown-timeout + inter-call-delay To maintain the absolute maximum call-to-call delay, call scripts or path confirmations are not allowed when reqd-call-to-call-delay is configured. In addition, variable duration is not supported. reqd-call-to-call-delay is closely related to the constant rate parameters when using the run and start commands. If reqd-call-to-call-delay and constant rate are not configured, Callgen might not be able to maintain a constant call rate throughout the test duration (see Starting Call Generation (page 5-1) 1. reqd-call-to-call-delay by itself does not affect the call rates. This feature is only supported in the voice CTM. Cisco Company Confidential Configuring Channels 4-5 Call Timing Parameters Specifying the Number of Calls to Place To specify the number of calls to place, use the rate parameter: [no] rate numberOfCalls [per [hour I minute I second}] If no time units are specified, the default is per second. rate is closely related to the call-to-call-delay parameter in that they are different ways of expressing the same thing: how many calls to place during a certain duration. Because of this, only one of these parameters can be included in a channel’s configuration; the most recent parameter specified is used. For example, if you have configured a channel with a call-to-call-delay and then specify a rate, the rate command appears in the configuration and the call-to-call-delay does not. The same configuration checking applies to rate as to call-to-call-delay by replacing call-to-call-delay with 1/rate. Delaying the Start Between Channels The start-to-start-delay parameter specifies the delay between the start of the previous channel to the start of the channel you are configuring. [no] start-to-start-delay delaylnSeconds [{minutes I seconds I hours}] The default is 0. In the following example, the configuration specifies that channel 2 starts 10 seconds after channel 1, and that channel 3 starts 5 minutes after channel 2. In terms of absolute start times, once you issue the start or run command, channel 1 would start immediately, channel 2 10 seconds later, and channel 3 in 5 minutes, 10 seconds into the run. channel 1 channel 2 start-to-start-delay 10 seconds channel 3 start-to-start-delay 5 minutes How the Time Parameters Work Together The following diagram shows the various channel and call timing parameters. Time is on the horizontal axis, with specific times labeled tO, tl,t 2, t3, and t4. The following abbreviations are also used: • SD = setup delay • TD = tear-down delay • STD = start-time delay • STS = start-to-start delay • ICD = inter-call delay tO represents the start of the test (the user has entered the start or run command). The start-time delay (time from tO to tl) represents the time between the start of the test and when the first active channel (not shutdown) starts placing calls. The start-to-start delay (configured under channel 2), the time from tl to t2, represents the delay between the start of the first channel and the start of the second channel. This allows the user to stagger or ramp up call generation. The setup delay (time from t2 to t3) represents the time between the start of a channel and when the call connection is established. 4-6 Callgen User Manual Cisco Company Confidential Displaying Channel Configurations The duration (time from t3 to t4) represents the duration of the call on channel 2. The tear-down delay (time from t4 to t5) represents the time between the start of disconnecting a call and when the call is completely disconnected. The length of the setup delay and the tear-down delay can be bounded through the configurations of setup timeout and tear-down timeout. CH 1 CH 2 1 1 —v -— SD 1 Random Duration "■ TD 1 ICD 1 1 1 1 1 1 - 4 -► STD 1 1 1 1 4 -H SD' 1 1 4 -► SD t *4 - 4 p TD 4 t 4 -* ICD r D -► *4—► SD l<- STS Fixed Duration 3 t to t'l t2 Cal!-to-call-delay t6 t7 Once started, the channel continues to place calls by waiting the specified inter-call-delay time, placing the call, holding the call active for the specified duration, and then terminating the call. Note that start-time delay and start-to-start delay are one time delays that apply only when the channel is first started. Furthermore, all of the above call timing parameters, with the exception of duration, can only be configured for originate channels (they do not apply to terminate channels). Note In most cases, a channel configured on an FXO interface is not notified when its opposite endpoint disconnects, so it remains in a connected or hold state until its own duration time expires. Therefore, when terminating a call on an FXO interface, be sure to specify a duration that is a little longer than that of its corresponding originate channel. The actual added delay depends on the cut-through time of the call setup. Also make sure to specify an adequate inter-call delay on the originate channel. Displaying Channel Configurations show config [channel beginchannel [- endchannel ]] Displays the configurations of all currently configured channels, unless a single channel or a range of channels is specified. When specifying a range, you must include spaces between the range value and the hyphen for the command to be parsed properly. If you need to reconstruct a channel configuration, you can cut and paste the output of this command into a callgen mode prompt. Future Callgen versions will allow saving this configuration to a TFTP server or Flash. Here is some sample output: router(callgen)# show config channel 1 type dummy mode originate duration 5 seconds dummy-signalling-mode duration dummy-random-delay setup 0 300000 channel 2 type voice mode originate duration 10 minutes Cisco Company Confidential Configuring Channels 4-7 Configuring Channel Pairs calling-number 19194722900 called-number 19194722824 router(callgen)# Configuring Channel Pairs By creating a channel pair, you can control the calls set up between two original channels. [no] ch-pair {channelNum peer_channelNum I channelNum } - end_channelNum [peer_channeINum - end_peer_channelNum\ Currently, when a channel starts, it places calls over and over again on the channel until the call duration expires. With channel pairing, when a call on a channel completes, a call on the paired channel is set up (the first channel remains idle). When the call on the second channel completes, a call on the first channel is set up. This continues until the session duration expires, or either of the channels are stopped. For example, in the following, channel 1 and 2 are paired: channel 1 type voice mode orig duration 5 seconds interface port:0:D channel 2 type voice mode orig duration 5 seconds interface port:0:D ch-pair 1 2 Pairing a Range of Channels The ch-pair command can also pair a range of originate channels. For example, the following pairs channels 3 to 5 with channels 6 to 8 (that is, the pairs are 3 and 6, 4 and 7, 5 and 8): ch-pair 3-56-8 When one of the channels in a pair is started or stopped, the other channel is automatically started or stopped. If both channels in a pair are specified as arguments to a start or stop command, the lower-numbered channel is started or stopped first. For example, the following starts channels 3 and 6. Channel 3 starts first. ch-pair 3-56-8 start 3 This command starts channels 3 and 6, however, channel 6 starts first. start 6 This command starts channels 3 to 5 and their paired channels 6 to 8. start 3-5 Using Channel Pairing for Bi-directional Testing The ch-pair command is also useful for setting up a bi-directional calling testbed. For example, assume the following testbed: Callgen Router (port 0) -> UUT (port 1) I 4-8 Callgen User Manual Cisco Company Confidential Configuring Early Disconnected Calls In the following, the originate and terminate channels are on same router. Channel 1 sets up a call that is answered by channel 2. When the call on channel 1 completes, channel 3 does a setup that is gets answered by channel 4 (note that this call is in the reverse direction from the first call). When channel 3 completes, a call on channel 1 is generated. For bi-directional calling to work, the originate channels must be on the same router. chan 1 mode originate called-number 5678 duration 5 seconds interface port:0:D chan 2 mode terminate called-number 5678 interface port:l:D chan 3 mode originate called-number 1234 duration 5 seconds interface port:l:D chan 4 mode terminate called-number 1234 interface port:0:D ch-pair 1 3 callgen> start Configuring Early Disconnected Calls The accept-premature-disc command handles an early disconnected call that has no other error as a passed call and updates the passed-calls counter accordingly when generating channel statistics. [no] accept-premature-disc You can configure this option on both a channel and a class. It should be enabled if you expect that the terminate channel could also initiate call disconnection. This option is disabled by default. Note Currently, this command is only applicable to voice calls. Configuring Thresholds The threshold command sets the threshold on call counters associated with a channel. You can configure thresholds on a channel or a class. [no] threshold callCounterName [in-percent] operator {value I percent} You can set thresholds on the following call counters: accepts, confirms, setup-fails, aborts, disconnects, confirm-fails, and other-fails. The threshold value can be specified either in percentage or absolute value. If the value is specified in percentage, use the keyword in-percent. The operator for accepts and confirms is <=. For all other call counters, it is >=. The range of the threshold is 1-MAXINT when absolute values are used. When percentages are used, the range is 1-100. The show channel command displays the channels that have exceeded the configured threshold (see Displaying Channel Information (page 4-12) ). Cisco Company Confidential Configuring Channels 4-9 Enabling Standard Deviation Examples Sets the threshold to see all channels with setup-fails above 10 percent: threshold setup-fails in-percent >= 11 Sets the threshold to see all channels with accepts below 90%: threshold accepts in-percent <= 89 Sets the threshold to see all channels with aborts above 4: threshold aborts >= 5 Sets the threshold to see all channels with aborts above 0: threshold aborts >= 1 Enabling Standard Deviation [no] stddev Enables the channel to gather call setup and tear-down information for standard deviation calculation at a later time. The command show aggregate triggers the calculation of standard deviation for all the channenls in the specified group of the command. If one of the channels in the group does not enable the stddev information gathering, show aggregate does not start the standard deviation calculation. The standard deviation calculation is based on all the calls of all the originate channels specified by show aggregate. Displaying Aggregate Statistics (page 5-3) Caution This feature demands memory of the Callgen router to store extra information for each call. It also slows down system performance. Try to execute show aggregate after Callgen finishs making calls. show agg Elapsed time of session: OOwOdOO:13:22.692 and counting Originate Statistics max# of concurrent calls: 1 active channels: 0 of 1 setup attempts: 3 accepts: 3 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 setup rate: 9 calls per hour accept rate: 9 calls per hour setup time: min: 4056ms, max: 4064ms, avg: 4061ms, stddev: 3ms hold time: min: 10000ms, max: 10000ms, avg: 10000ms disconnect time: min: 800ms, max: 800ms, avg: 800ms, stddev: 0ms idle time: min: 2000ms, max: 2000ms, avg: 2000ms 4-10 Callgen User Manual Cisco Company Confidential Creating Classes Creating Classes If you have many channels with common parameters, you can define a class that contains the shared configuration values. The configuration parameters can then be applied to each channel with the class configuration command when the channel is created. class classname [type type [mode [originate I terminate}]] Each class has a text name (up to 15 characters) that is used to identify it. You can give the class a name that describes the call. All configuration options that are valid for channel configuration can be included in a class, with the exception of the class and shutdown commands. To change a class’s type or mode, you must first delete the class and then redefine it. The following example defines a class named short-voice. The class is then assigned to channels 1 and 2: class short-voice rate 5 per minute duration random 5 10 seconds calling-number 919-472-2900 channel 1-2 class short-voice Deleting Classes You cannot delete a class if there are channels that refer to the class. You must first delete all channels that refer to the class, and then delete the class. To delete all channels and classes, use the clear config command (see Deleting Channels (page 4-3) ). To delete a specific class, use the prefix no before the class command: no class clcissname For example, from callgen mode: router(callgen)# no class ISPcalls From IOS exec mode: router# callgen no class ISPcalls Overriding Class Parameters Any class parameter can be overridden by specifying it under the channel. For example, we define the following class: class foobar duration 3 minutes We then assign the class to the following channels: channel 1 class foobar duration 1 minutes channel 2 class foobar Since channel 1 also has a duration configured under the channel configuration, the channel value overrides the class-specified value. So channel 1 places calls with a duration of 1 minute, while channel 2 places calls with a duration of 3 minutes (as specified in the class). Cisco Company Confidential Configuring Channels 4-11 Auto Called/Cailing Number Generation Auto Called/Calling Number Generation To generate called numbers automatically for a large number of channels, you need to create a fax or voice originate/terminate class and use the command start-called-number number to specify the starting called number. Once this has been specified, you can add the increment value that each subsequently generated called number should be increased by. This is done with the called-inerement-step step command. If this command is not specified, the default increment is 1, meaning that the called numbers are generated sequentially with a difference of one between them. Make sure that the called number has no spaces or dashes (-). The calling number can also be generated in the same way in voice and fax classes. The only difference is that it is only applicable for an originating class. The command start-calling-number number is specified to indicate the starting calling number from where to generate the numbers. Similarly, the calling-increment-step step command specifies an increment value for the generation of the subsequent calling numbers. After making these changes in the class, when a channel is created with the class, it will have this feature. For example, in the following class v_o has the following parameters: class v_o type voice mode originate start-called-number 5140000 start-calling-number 6150000 calling-increment-step 3 called-increment-step 2 Then we issue the following command: class v_o type voice mode originate router(callgen) #chan 1-3 class v_o The following channels are created in the configuration as a result of this. These channels can be used normally for making and terminating calls. channel 1 class v_o calling-number 6150000 called-number 5140000 channel 2 class v_o calling-number 6150003 called-number 5140002 channel 3 class v_o calling-number 6150006 called-number 5140004 Note Currently, the called and calling numbers cannot have more than 10 digits and cannot have any characters other than digits. In addition, these numbers cannot start with 0. Displaying Channel Information The show channel command, entered with no arguments, displays a summary of all configured channels, including the current state and various call counters. clash-5300(callgen)# show channel ch-l-du-o, state: IDLE, attempts: 1, accepts: 1, confirms: 0, if: , setup-fails: 0, aborts: 0, disconnects: 0, confirm-fails: 0, other-fails: 0 passed-calls: 1, failed-calls: 0 4-12 Callgen User Manual Cisco Company Confidential Displaying Channel Information ch-2-vo-o, state: INACTIVE, attempts: 0, accepts: 0, confirms: 0, if: , setup-fails: 0, aborts: 0, disconnects: 0, confirm-fails: 0, other-fails: 0 passed-calls: 0, failed-calls: 0 The output includes the following information: Field Description ch-#-type-mode Indicates the channel number, call type, and mode, type is either vo for a voice channel or du for a dummy channel. Mode is either o for originate or t for terminate. state: STATE Indicates the current state of the channel. Can be one of the following: DOWN —channel has been shutdown INACTIVE — channel has not been started IDLE —channel is running but currently not in a call SETUP —channel currently setting up a call HOLD —call has been setup and accepted DISC —call is currently being torn down attempts Number of call attempts on this channel. Callgen increments the attempt counter after it sucessfully initiates a setup request to the underlying IOS layer. It is possible that the attempt counter is not incremented after one “try-to-attempt,” but one or more of the error counters, usually the other-errors counter, are incremented after one “try-to-attempt.” Also, it is possible to issue the command start total-calls 10, but Callgen only attempts to make five calls. There could be a “pre- call-setup request error” or “configuration error.” Note If a “try-to-attempt” is not counted toward an “attempt”, it does not counted toward “setup-fails” either. Since the value of the “attempt” counter does not always match the number of calls you specify in the start command, do not check the attempt counter in a loop in your automation scrip. If you do, an infinity loop might happen when Callgen has a problem with initiating call setups. To check whether Callgen has completed the test after issuing start total-calls n, or any start command, you should check if all the Callgen originate channels have gone back to INACTIVE state and all the terminate channels have gone back to IDLE state, or an INACTIVE state if stop is issued. The easiest way is to do this is to check the output of Callgen show aggregate. accepts Number of call accepts for this channel. For example, number of times the call was answered by the called party. confirms Number of calls with successful path confirmation. Path confirmation is considered successful if no errors occur for the duration of the call and at least one path confirmation cycle completes. Thus, it is possible for a call to be abnormally disconnected or aborted and still have path confirmation succeed. if Indicates the interface port name or dial-peer tag number associated with this channel. setup-fails Number of calls failed during call setup state. aborts Number of calls terminated by the user. For example, the user entered a stop command. disconnects Number of calls abnormally disconnected. For an originate channel, any disconnect from the remote endpoint is considered abnormal. confirm-fails Number of calls with path confirmation failures. A path confirmation failure occurs when an incorrect tone or DTMF digit is received or when a timeout occurs. other-fails Number of calls with failures not meeting the above classes. Currently, the conditions that cause this counter to increment are channel misconfiguration failures; if path-confirmation type is configured and a call is disconnected before path-confirmation finishes one trial; and someone stops/aborts a channel while the current trial of path-confirmation is ongoing and there is no previous path-confirmation error for this call. Cisco Company Confidential Configuring Channels 4-13 Displaying Channel Information Field Description passed-calls Number of calls without any failure indicated by any of the error counters. If accept-premature-disc is enabled, an early disconnect call without signaling error and without path-confirmation error is treated as a passed call. This counter gathers aggregate information, so you can look at this counter instead of individual counters if you are only interested in knowing whether a call passed. See Configuring Earlv Disconnected Calls (page 4-9). failed-calls Number of calls with any failure indicated by any of the error counters. If accept-premature-disc is not enabled, an early disconnect call, with or without signaling error and without path-confirmation error, is treated as a failed call. This counter gathers aggregate information, so you can look at this counter instead of individual counters if you are onlv interested in knowing whether a call passed. See Configuring Earlv Disconnected Calls (page 4-9). With the show channel command, you can also specify a numerical range, a class name, or a specific call state to limit the display. For example, wizards-3640(callgen)# show channel 3-9 wizards-3640(callgen)# show channel 3 - wizards-3640(callgen)# show channel in-class CAS_orig wizards-3640(callgen)# show channel in-hold-state If you specify a specific channel number, the output is broken up into two sections. The first section lists the call statistics, and the second section details how the channel is configured. The format and content vary with call type and mode. For example: wizards-3640(callgen)# show channel 1 Channel 1 Call Statistics elapsed channel run time: OOwOdOO:00:09.004 channel state: INACTIVE setup attempts: 3 accepts: 3 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 passed-calls: 3 failed-calls: 0 setup rate: 13 calls per minute accept rate: 13 calls per minute setup time: min: 0ms, max: 0ms, avg: 0ms hold time: min: 3000ms, max: 3000ms, avg: 3000ms disconnect time: min: 0ms, max: 0ms, avg: 0ms idle time: min: 0ms, max: 0ms, avg: 0ms idleTimelnMilliseconds 0 Channel 1 Current Settings channel type is dummy channel mode is originate minimum call-to-call-delay is 0 seconds call duration is 3 seconds minimum inter-call-delay is 0 seconds start-to-start-delay is 0 seconds start-time-delay is 0 seconds dummy originate channel channel #1 instance #1 signalling-mode(Default):duration if(Default )' channel-state:idle call-status:accepted error-status:no-error current call - setupMsec:0 activeMsec:3000 terminateMsec:0 idleMsec:0 random config parameters: 4-14 Callgen User Manual Cisco Company Confidential show report setup(Default) min:0 msec max:0 msec active(Default) min:0 msec max:0 msec teardown(Default) min:0 msec max:0 msec show report The show report command lists call statistics and configuration information, which can be used to archive the current results and all the configuration settings for a test run. You can also choose the amount of detail to display, using one of the following options: show report [brief] Displays concatenated output of the callgen show and show config commands, and the IOS show run command. For example: cg-5300-7(callgen)#show report Building configuration... Aggregate Call Statistics Elapsed time of session: OOwldO6:17:30.020 and counting Originate Statistics active channels: 0 of 0 setup attempts: 0 accepts: 0 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 setup rate: 0 calls per millisecond accept rate: 0 calls per millisecond setup time: min: 0ms, max: 0ms, avg: 0ms hold time: min: 0ms, max: 0ms, avg: 0ms disconnect time: min: 0ms, max: 0ms, avg: 0ms show report summary Displays concatenated output of the callgen show channel and show config commands, and the IOS show run command. For example: cg-5300-7(callgen)#show report summary Building configuration... ! Callgen Config: channel 5001 type voice mode terminate called-number 7250001 path-confirmation type ping called-number path-confirmation cut-through-time 2 seconds path-confirmation digit-on-time 150 milliseconds path-confirmation digit-off-time 50 milliseconds interface port:3:l !Current router configuration: i ! Last configuration change at 21:46:55 UTC Sat Jan 1 2000 show report detail Displays concatenated output of callgen show channel man command for all channels as well as the callgen show config and IOS show run commands. For example: Cisco Company Confidential Configuring Channels 4-15 Displaying Threshold Information cg-5300-7(callgen)#show report detail Building configuration... Channel 5001 Call Statistics elapsed channel run time: 00w0dl5:24:52.432 and counting channel state: IDLE setup attempts: 0 accepts: 0 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 passed-calls: 0 failed-calls: 0 setup rate: 0 calls per millisecond accept rate: 0 calls per millisecond hold time: min: 0ms, max: 0ms, avg: 0ms inter-digit-delay: min: 0ms, max: 0ms, avg: 0ms last disconnect cause: 0 last abnormal disconnect cause: 0 Script Stopwatch: N/A Displaying Threshold Information The show threshold-exceeded displays the channels exceeding the configured thresholds. The output reflects the current status of the call counters. show threshold-exceeded [{callCounterName I channel channelNum} The command can be used in the following three ways: show threshold-exceeded callCounterName Displays the channels exceeding the configured threshold for the specified call counter. show threshold-exceeded channel channelNum Displays the thresholds that have been exceeded on the specified channel number. show threshold-exceeded Displays a list of channels exceeding the configured thresholds for all call counters. For example: cg-train-9(callgen) #show threshold-exceed setup-fails Channel# Threshold: setup-fails Current Value 2 > = 90 4 > = 90 5 > = 90 6 > = 90 94% 92% 100 % 100 % cg-train-9(callgen) #show threshold-exceed channel 4 Channel 4 Threshold Current Value 92% 1 cg-train-9(callgen) #show threshold-exceed setup-fail threshold >= 90% accepts threshold <= 3 4-16 Callgen User Manual Cisco Company Confidential show log threshold Channel# Threshold: confirmed-error Current Value Channel# Threshold: aborts Current Value 1 >= 1 1 Channel# Threshold: setup-fails Current Value 2 >= 90% 94% 4 >= 90% 92% 5 >= 90% 100% Channel# Threshold: abnormal-disconnect Current Value Channel# Threshold: other-error Current Value Channel# Threshold: accepts Current Value 1 <= 3 3 2 <= 3 1 4 <= 3 1 Channel# Threshold: confirms Current Value show log threshold The show log threshold displays the information contained in the threshold log. A message is recorded in the log whenever a channel exceeds the set threshold for a call counter. Messages are logged on a channel and counter basis. For example: cg-train- CH2_00:01 threshold CH2_00:01 CH3_00:01 threshold CH3_00:01 CH4_00:01 threshold CH4_00:01 CH5_00:01 threshold CH5_00:01 CH1_00:02 90% CH1_00:02 9(callgen) #show log threshold :35.067 setup-fail threshold, current threshold 100^ 90% :35.067 accepts threshold, current threshold 0 is <= :35.071 setup-fail threshold, current threshold 100^ 90% :35.071 accepts threshold, current threshold 0 is <= :35.071 setup-fail threshold, current threshold 100^ 90% :35.071 accepts threshold, current threshold 0 is <= :35.071 setup-fail threshold, current threshold 100^ 90% :35.071 accepts threshold, current threshold 0 is <= :07.755 setup-fail threshold, current threshold 90% is >= configured configured threshold 3 is >= configured configured threshold 3 is >= configured configured threshold 3 is >= configured = configured threshold 3 is >= configured threshold : 35.043 aborts threshold, current threshold 1 is >= configured threshold 1 Cisco Company Confidential Configuring Channels 4-17 Displaying Threshold Information 4-18 Callgen User Manual Cisco Company Confidential CHAPTER 5 Placing Calls After you have configured channels, you can start placing calls. This chapter explains how to start and stop call generation. Starting Call Generation Callgen has two commands for placing calls: run and start. The run command is synchronous in that it does not return until call generation is complete. The start command is asynchronous; it immediately returns you to the callgen mode prompt so that you can interactively query call status as calls are placed. The parameters for both commands are exactly the same: run I start [beginchannel [- endchannel ]] [total-calls callcount ] [test-duration duration [hours I minutes I seconds] [end-gracefully]] [[constant] rate number_of_calls per [hour I minute I second]] beginchannel [- endchannel ]—You can specify a single channel or a range of channels. If a channel is not specified, the command applies to all configured, active (not shutdown) channels. When specifying a range, you must include spaces between the range value and the hyphen for the command to parse properly. total-calls—Number of call attempts (across all the channels currently placing calls) before stopping. test-duration—Number of minutes (default), seconds, or hours to run before stopping. end-gracefully—Defers disconnecting the current call until its expected duration has expired. constant—Generates constant call set-up rates across active originate channels. This option only applies to the rate parameter. To enable this option, you must also configure reqd-call-to-call-delay for all the channels in a test (see Required Delay Time Between Starting Calls (page 4-51 ). The test is aborted if there are not enough channels to generate the specified call rate. This option is only implemented for the voice CTM. rate—Number of calls to place in the specified time. Callgen attempts to provide this aggregate call rate across the active originate channels that the start or run command applies to. Note You should always start terminate channels first so that they will be ready to answer incoming calls from originate channels. For example, the following generates 10,000 calls on all configured originate channels: Cisco Company Confidential Placing Calls 5-1 Stopping Call Generation start total-calls 10000 The following generates calls for eight hours on channels 3 through 10: start 3-10 test-duration 8 hours If no time parameters are specified, Callgen places calls repeatedly on each channel until either a callgen stop command is entered at the prompt or Control + shift + 6 is pressed. Note Callgen automatically creates a dial peer for each terminated called number. These dial peers are necessary for incoming calls to be handed off to Callgen properly. Do not remove or modify these auto-generated dial peers. Stopping Call Generation You can stop call generation using the Callgen stop command. If you use the stop command without any parameters, it terminates call generation on all active channels immediately. stop [beginchannel [- endchannel ] [deferrably I gracefully I immediately ] [call] beginchannel [- endchannel ]—You can specify a single channel or a range of channels. If a channel is not specified, the command stops all currently running channels. When specifying a range, you must include spaces between the range value and the hyphen for the command to parse properly. deferrably—Stops all channels as soon as possible, as if normal duration expired. No call script is aborted. gracefully—Stops all channels when the call’s duration expires. No channel is aborted. call—Stops the channel and instead of bringing the channel state to INACTIVE state, it changes to IDLE state. This option is only applicable for terminate channels. For example, the following stops channels 1 through 90 when normal call duration has expired: stop 1-90 gracefully Clearing Call Statistics Before Placing Calls The Callgen clear counters command resets all generic and call type specific statistics and counters. By default, Callgen does not reset statistics before starting call generation. If you want statistics to be zeroed out before placing calls, issue this command before the callgen run or start command. The options are as follows. If no options are specified, all counters are cleared. clear counters beginchannel [ - endchannel\ Clears counters in the specified channel number or a range of channels. clear counters in-class classname Clears counters in channels belonging to the specified class. 5-2 Callgen User Manual Cisco Company Confidential Displaying Call Statistics Displaying Call Statistics The callgen show command, entered without any additional arguments, displays a summary of aggregate call statistics for originate and terminate sessions, including the number of active channels, elapsed time of the current run, and general call statistics. For example: wizards-3640(callgen)# show Aggregate Call Statistics Elapsed time of session: 00w6d22:36:53.364 Originate Statistics max# of concurrent calls: 6 active channels: 0 of 6 setup attempts: 251 accepts: 251 confirms: 0 setup-fails: 0 aborts: 1 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 passed-calls: 250 failed-calls: 1 setup rate: 1 calls per hour accept rate: 1 calls per hour setup time: min: 228ms, max: 4208ms, avg: 243ms hold time: min: 3840ms, max: 300592ms, avg: 10308ms disconnect time: min: 4ms, max: 440ms, avg: 5ms idle time: min: 5768ms, max: 14768ms, avg: 10599ms Terminate Statistics active channels: 0 of 3 setup attempts: 251 accepts: 251 confirms: 0 setup-fails: 0 aborts: 1 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 passed-calls: 250 failed-calls: 1 setup rate: 1 calls per hour accept rate: 1 calls per hour hold time: min: 4052ms, max: 302584ms, avg: 10533ms Note The show command without any other option shows the call statistics accumulated over a period of time. The show aggregate command shows the statistics calculated on the fly. The show command might give inconsistent statistics because of a timing glitch but has little impact on router performance. The show aggregate command has a lot of impact on router performance if there are many channels and many calls per channel. It is not advisable to execute show aggregate while there are active calls. Displaying Aggregate Statistics The show aggregate command displays a summary of call aggregate statistics for both originate and terminate sessions. This command also provides detail statistics on active channels. For example: cg-5300-8(callgen)# show aggregate Elapsed time of session: OOwOdOO:00:10.980 and counting Cisco Company Confidential Placing Calls 5-3 Displaying Aggregate Statistics Originate Statistics max# of concurrent calls: 2 active channels: 2 of 2 HOLD: 2 setup attempts: 2 accepts: 2 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 passed-calls: 0 failed-calls: 0 setup rate: 0 calls per millisecond accept rate: 0 calls per millisecond setup time: min: 212ms, max: 212ms, avg: 212ms hold time: min: Oms, max: 0ms, avg: 0ms disconnect time: min: Oms, max: Oms, avg: Oms idle time: min: Oms, max: Oms, avg: Oms Terminate Statistics active channels: 2 of 2 HOLD: 2 setup attempts: 2 accepts: 2 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 passed-calls: 0 failed-calls: 0 setup rate: 0 calls per millisecond accept rate: 0 calls per millisecond hold time: min: Oms, max: Oms, avg: Oms If standard deviation is enabled for all the channels that are used to calculate the aggregated statistics for show aggregate, the output of show aggregate shows the standard deviation entries as well (see cgt-3660-4(callgen)# how agg Elapsed time of session: OOwOdOO:13:22.692 and counting Originate Statistics max# of concurrent calls: 1 active channels: 0 of 1 setup attempts: 3 accepts: 3 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 passed-calls: 3 failed-calls: 0 setup rate: 9 calls per hour accept rate: 9 calls per hour setup time: min: 4056ms, max: 4064ms, avg: 4061ms, stddev: 3ms hold time: min: 10000ms, max: 10000ms, avg: 10000ms disconnect time: min: 800ms, max: 800ms, avg: 800ms, stddev: Oms idle time: min: 2000ms, max: 2000ms, avg: 2000ms 5-4 Callgen User Manual Cisco Company Confidential Displaying Aggregate Statistics You can also specify a numerical range, a class name, or a specific mode to limit the display. Here are the options: show aggregate mode {egModeOriginate I cgModeTerminate} show aggregate channel startChannel - [mode {egModeOriginate I cgModeTerminate}] show aggregate channel startChannel - endChannel [mode [egModeOriginate I cgModeTerminate} ] show aggregate channel in-class className In addition, it is possible to see the aggregate voice-related statistics by issuing the command in callgen mode: show aggregate voice—Shows the aggregate voice statistics for all channels. show aggregate voice channel n - [m \—Shows the aggregate voice statistics for channels ranging from n to m. The output of the above commands looks like this: cg-as5400-3(callgen)#sh aggregate voice Originate Voice Channels Avg. Jitter Lead Oms Avg. Jitter Lag 0ms Avg. E2E Delay Oms Avg. RTT Oms Hits 0 Clips 0 Max_Hit_Erros 0 Statistics Cisco Company Confidential Placing Calls 5-5 Displaying Aggregate Statistics 5-6 Callgen User Manual Cisco Company Confidential CHAPTER 6 Voice Call Type Module The voice call type module (CTM) is written on top of IOS Symphony and, therefore, inherits Symphony’s underlying functionality and capabilities. The voice CTM supports origination and termination of calls on Tl/El ISDN PRI trunks, Tl/CAS trunks, POTS interfaces (FXS, FXO, and E&M), VoIP, and VoFR. Voice CTM Configuration Parameters The following sections detail the voice-specific CTM parameters and commands. Hanging Up a Call The hang-up command forces the current call to disconnect. It has the same effect as if the configured call duration expired. Example: clash-5300(callgen) # channel 64 hang-up Specifying the Calling Address To establish a call, Callgen must know what number to dial as well as what number to associate with a channel. This is accomplished with the following two parameters. called-number—For originate channels, this specifies the number called. For terminate channels, this specifies the number associated with the specified channel. This is a required parameter. Example: clash-5300(callgen) # channel 64 called-number 19195551212 For ISDN calls, you can specify the type of number and numbering plan identification of the called-party number information element (IE) by giving the oct3 byte in hex value. For example, the Q.931 standard specifies that a national number type and an ISDN numbering plan has an oct3 of 21: clash-5300(callgen) # channel 64 called-number 5551212 oct3 21 calling-number—For originate channels only. Specifies the number you are calling from. This information is passed to the called party during call setup for those signaling interfaces that support this capability (such as ISDN PRI, VOIP H323). For example: Cisco Company Confidential Voice Call Type Module 6-1 Voice CTM Configuration Parameters clash-5300(callgen)# channel 64 calling-number 19192221212 For ISDN calls, in addition to the oct3 byte, you can configure the oct3a byte, which specifies the presentation and screening indicators. For example, if the indicators are “presentation restricted,” “user-provided,” “verified,” and “failed”: clash-5300(callgen)# channel 64 calling-number 2221212 oct3 21 oct3a A2 Specifying a Redirecting Number redirect {redirecting-number I original-called-number} number [reason nl] [counter n2] Before a call reaches a Cisco access server, it might have previously been redirected by a 5ESS switch and have redirecting information on the original called number (OCN) or the redirect number (RDN) attached. The OCN is used in H.323 tunneling, and the RDN is used for other services. This new feature enables including OCN or RDN IE in an ISDN SETUP message of a PRI call as well as the redirecting reason and counter. Note that in IOS, switch-type primary-dmslOO only supports OCN, and the rest of the types only support RDN. The parameter is converted to the other form if it is not supported. For example, for primary-5ess, an OCN is converted to an RDN, while primary-dmslOO always converts RDN to OCN. Specifying Setup Timeout setup-timeout value [seconds] Enables forced disconnection of a setup attempt if it takes too long. This ensures the continuity of testing and prevents a channel hanging in the SETUP phase. This configuration applies to originate channels only. The default is 16 seconds. The configurable range is [1, 300] seconds. Note The default is 300 seconds for Callgen v4.1 and earlier. Specifying Tear-down Timeout teardown-timeout value [seconds] Enables forced disconnection of a tear-down attempt if it takes too long. This ensures the continuity of testing and prevents a channel hanging in the DISC phase. This configuration applies to originate and terminate channels. The default is 5 seconds. The configurable range is [1, 300] seconds. Note The default is 300 seconds for Callgen v4.1T and earlier. Setting the Ringing Duration ringing-duration duration timejunit Simulates a deferred answering of a call, like when a user picks up after a couple of rings. For PRI or CAS calls, you can specify a ringing duration before answering a call for the terminate configuration. 6-2 Callgen User Manual Cisco Company Confidential Detecting Call Progression Tones (CPtone) Note When E1R2 signaling type is used, Callgen terminate channels need to have “ringing- duration 2 seconds” configured. Otherwise, you will likely see the following scenario: the terminate channel is in a HOLD state and the originate channel is in a SETUP state. Detecting Call Progression Tones (CPtone) Note Some documents also refer to call progression tones as supervisory tones. Configuring Call Progression Tone Detection [no] cptone-detect [custom-cptone tone-name ] [dualtone-detect-params dualtone-tag ] [timeout timeout-value [seconds]] cptone-detect is equivalent to the current cptone-detect default, that is, the IOS voice-port mode command cptone locale, which defines the CPtone set. If no cptone locale is configured under the specific voice port that a Callgen channel is associated with, the default is cptone us. Note This feature is only applied to the originating channel or class. To configure a custom tone, use cptone-detect custom-cptone tone-name. To configure a custom dual tone detect parameter, use cptone-detect dualtone-detect-params dualtone-tag. To configure both a custom CPtone and a custom dual tone, use cptone-detect custom-cptone tone-name dualtone-detect-params dualtone-tag. You can configure a timeout value with any of the above options. The default is 15 seconds. Path confirmation or a script does not begin before the configured cptone is detected or the timeout timer expires. To remove this configuration, use no cptone-detect. Note This feature is not supported on platforms using NextPort DSP, such as as5400, as5400HPX, and as5850. Note If script and/or path confirmation is configured when cptone detection is enabled, Callgen is likely to pick up the unwanted ringback tone. To work around this problem, configure the script command wst tone or ps n-seconds. The specified tone should be high frequency and different from the tones used in the 3-tone path confirmation. If the ps option is used, the configured number of seconds depends on how long ringing duration is configured on the terminating gateway. If the default ringing duration is used, ps 5 should be good. See Defining a Call Script (page 6-4) for more information on the script command usages. Note If a call originates from a PRI interface, only the ringback tone can be detected. Cisco Company Confidential Voice Call Type Module 6-3 Defining a Call Script Configuring Custom Call Progression Tones in IOS You can configure a custom CPtone set using the custom-eptone and dualtone-detect-params options, tone-name is defined by the IOS global configuration voice class custome-cptone tone-name, dualtone-tag is defined by the IOS global configuration voice class dualtone-detect-params dualtone-tag. Sample configuration for a predefined CPtone set: IOS configuration (note, you do not have to configure cptone us, since it is the default value): voice-port 0:D cptone us Callgen configuration: channel 1 cptone-detect Sample configuration for a custom CPtone set: IOS configuration: voice class custome-cptone uk-custom dualtone ringback frequency 400 450 cadence 400 200 400 2000 voice class dualtone-detect-params 50 freq-max-deviation 10 freq-max-power 6 freq-min-power 25 freq-power-twist 15 freq-max-delay 16 cadence-min-on-time 50 cadence-max-on-time 2400 cadence-variation 8 Callgen configuration: channel 1 cptone-detect custom-cptone uk-custom dualtone-detect-params 50 Defining a Call Script Call Script Commands You can use the script command to define a simple script that is executed when the call is established. This gives you complete control over the timing of when DTMF tones are sent and/or expected. The following options can be used in the script. All script instructions and arguments must be separated by spaces. { Indicates the beginning of the call script. sd dtmf_string Sends a string of DTMF tones (legal values: 0123456789 ABCD*#). For example, sd 12345 rd dtmf_string Expects to receive a string of DTMF tones. For example, rd 12345 don duration Specifies the tone duration (in milliseconds) of DTMF tones dialed by following sd commands. For example, don 50 6-4 Callgen User Manual Cisco Company Confidential Examples doff duration Specifies the inter-digit duration (in milliseconds) of DTMF tones dialed by following sd commands. For example, doff 100 dts frequency 1 [frequency 2 1 0] Sends a dual tone of the specified frequencies for a duration in duration milliseconds. If freqency2 is zero, a monotone is sent. Atr frequency 1 [frequency2 1 0] Detects a dual tone of the specified frequencies using the DSP. idle Idle until the call duration expires. If the duration is not configured, or the call duration already expires before reaching the idle instruction, the instruction has no effect on the call. If present, this must always be the last instruction. pms milliseconds Pauses the specified number of milliseconds. For example, pms 100 ps seconds Pauses the specified number of seconds. For example, ps 10 vad Pauses until voice activity detected. fish Generates a hookflash. lc n_times Loops on the previous instruction n times. For example, lc 1 executes the previous instruction one more time. Is [; njtimes ] Loops on the script n times. If the number of times is not specified, it loops on script until the call duration expires (call will not be disconnect until script completes). If present, this instruction must always be the last instruction. For example. Is 5 executes the script five times and then disconnects. If path confirmation is also desired on the call, then Is needs to be specified with a loop count. ms Sets next instruction as a new entry point of script. The Is instruction uses this instruction as the return point when looping. pi audio-fde-tag Plays an audio file onto the channel. The file tag must have been defined in global mode. This instruction ends when the playing finishes. For example, pi 1 rc audio-file-tag duration Records the incoming voice on the channel to an audio file. The file tag must have been defined in global mode. This instruction ends when the duration in seconds of voice has been recorded. For example, rc 2 10. Note Recording audio into a file in a router's flash is not supported. st tone-freq duration Sends tone of specified tone-freq for duration in milliseconds. For example, st 1000 50 rt tone-freq Detects the tone of the specified tone-freq. wst tone-freq Wait for a sync tone. The difference between wst and rt is that wst ignores the unexpected incoming tones, and rt treats unexpected tones as an error. dat n-milliseconds Detects arbitrary tones for the specified period of time. rstt Resets the script stopwatch. stpt Stops the script stopwatch and calculates the elapsed time after resetting the script stopwatch. The rstt command should precede this instruction. For example, rstt vad stpt determines the elapsed time to detect voice activity. } Indicates the end of the call script. Examples In the following, when the call is established, the script first sends the DTMF sequence, 45678, and then waits to receive the DTMF sequence, 1234. Once these tones are received, the script pauses for Cisco Company Confidential Voice Call Type Module 6-5 Defining a Call Script 5 seconds and then sends the DTMF sequence, 123. This instruction is then repeated two more times. Thus, the DTMF sequence actually sent is 123123123. If path confirmation is configured on the channel, it is done; otherwise, the call is disconnected. script {sd 45678 rd 1234 ps 5 sd 123 lc 2} This script is the same as above, expect that it continues to repeat until the call duration expires. If the call duration expires in the middle of a script, the current script iteration completes and the call is disconnected. Additionally, you will not be able to configure path confirmation on this channel. script {sd 45678 rd 1234 ps 5 sd 123 lc 2 Is} This script operates the same as the previous script on the first pass; however, instead of repeating from the start of the script, the Is instruction causes control to return to the rd 1234 instruction. script {sd 45678 ms rd 1234 ps 5 sd 123 lc 2 Is} The ping form of path confirmation can also be specified as a script (in fact, this is how Callgen implements it). For example, the following two path-confirmation configurations are equivalent for an originate channel; path-confirmation type ping string 1234 script {rd 1234 sd 1234 Is} The following two path-confirmation configurations are equivalent for a terminate channel; path-confirmation type ping string 1234 script {sd 1234 rd 1234 Is} Scripts also help to enable generating RTP traffic to a specific VoIP gateway by repeatedly wrapping an audio file into RTP packets and sending them out. For example (you should first copy an audio file to the Flash); IOS config: dial-peer voice 1001 voip destination-pattern 525.... codec g711ulaw no vad session target ipv4:10.0.1.5 Callgen config: global type voice audio-file 1 flashireference.au channel 1 type voice mode originate calling-number 5270001 called-number 5250001 duration 3 minutes inter-call-delay 5 seconds script {pi 1 ps 1 Is} interface voip:1001 wst Script Command wst is especially useful when you want to synchronize both CG_originate and CG_terminate before taking the next action, for example, path confirmation. It is also used to avoid Callgen mistaking the call progression tones as the expected tones/path confirmation tones sent by the far end. Before this command is implemented, you should configure script {ps 5}, which allows Callgen to wait for 5 seconds to bypass the call progression tones before the path confirmation starts. By default, wst waits for 15 seconds for a tone. You can change this time value with the command path-confirmation time-out n. When wst detects a tone, the wait timer is reset. 6-6 Callgen User Manual Cisco Company Confidential dat Script Command For example: channel 1 type voice mode originate duration 30 seconds called-number 8886666 path-confirmation type 3-tone-slope script { wst 2230 ps 1 } interface port:2/0:0 channel 2 type voice mode terminate called-number 8886666 path-confirmation type 3-tone-slope script { st 2230 100 ps 2 } interface port:2/l:0 dat Script Command dat n-miUiseconds Records the arbitrary tones Callgen detected within the specified period of time. The internal tone buffer can hold 20 entries at most. The buffer is wrapped around from the beginning of the buffer if more than 20 tones have been detected. Use show channel n to see which tones are being detected. The advantage of using this command is that if an expected tone (with respect to your test case) is received, Callgen does not consider it an error and does not disconnect the call because of the unexpected tone. It is good to use this feature rather than rt if you know that the network is busy and you are expecting the tone to be garbled. Note If the far end sends a long duration tone, Callgen thinks that multiple tones are being sent from the far end. To avoid that, if you are sending a high frequency tone (> 1000Hz), a tone duration of 100 milliseconds is enough. If you are sending a low frequency tone (< 1000Hz), a tone of 100 to 150 milliseconds is good. Basically, the lower the frequency, the longer the time is needed to detect the tone, for example, for 400Hz, you need about 150 milliseconds. For example: Channel 1 mode originate Called-number 123 Script { dat 5000 } Interface port:1/0:0 Channel 101 mode terminate Called-number 123 Script { st 500 150 pms 50 st 1005 100 pms 500 st 2005 150 idle } Interface port:1/1:0 cg-3660-1(callgen)#sh ch 1 Channel 1 Call Statistics elapsed channel run time: OOwOdOO:00:07.756 channel state: INACTIVE setup attempts: 1 accepts: 1 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 passed-calls: 1 Cisco Company Confidential Voice Call Type Module 6-7 Path Confirmation failed-calls: 0 setup rate: 0 calls per millisecond accept rate: 0 calls per millisecond setup time: min: 1956ms, max: 1956ms, avg: 1956ms hold time: min: 5000ms, max: 5000ms, avg: 5000ms disconnect time: min: 800ms, max: 800ms, avg: 800ms idle time: min: 0ms, max: 0ms, avg: 0ms inter-digit-delay: min: 0ms, max: 0ms, avg: 0ms last disconnect cause: 16 normal call clearing (16) last abnormal disconnect cause: 0 script completed: YES Detected arb tones: 500 1000 2000 2012 Script Stopwatch: N/A Note 4-tone is detected instead of 3-tone. The reason the last two tones are detected instead of one tone is because of a long tone duration (for a high frequency tone). Specifying a Timeout Value for Script Commands [no] script time-out n [{[seconds] I milliseconds}] Configures a timeout value for the rd, rt, and wst script commands. It can be configured on both a channel and a class. The default is 15 seconds, where seconds is the default timeout unit. Note Use the command path-confirmation timeout n [seconds] for version 4. IT or earlier. Executing a Call Script On Demand channel startChannel [- endChannel ] script {...} exec Configures and executes a Callgen script on demand. To do this, the following conditions much be satisfied: • An infinite loop-script instruction cannot be configured in the current script if the channel is already configured with a call script. • A path-confirmation type cannot be configured for the channel. • A channel must be in the hold state at the time this command is entered. You can reconfigure a script on demand many times if each script is configured with the idle instruction. For example: cg-5300-8(callgen)#channel 1 script {ps 10 sd 123 idle} exec Note The output of the show channel man command shows the completion status of a script, which could be a static call script or a call script on demand. If a script is removed or no script is configured, the script completion indication is not shown. Path Confirmation Path confirmation is the term Callgen uses to indicate any form of communication passed inband (in the voice or bearer channel) to verify end-to-end voice communication of telephony calls. Path confirmation also applies to H.323 calls by using the DTMF-relay technique. In that case, along the 6-8 Callgen User Manual Cisco Company Confidential Specifying 3-Tone Slope voice path, DTMF tones are inband signals when passing a telephony interface and outband H.245 messages when passing a network interface. Note Path confirmation cannot be used when originating or terminating calls over a VoFR interface. Currently, path confirmation only supports ping-type calls with an H.323 originate or terminate endpoint. path-confirmation type ping [{string dtmf_string } I called-number] string dtmf_string —Numeric string to ping back and forth. For example: path-confirmation type ping string 1234 called-number—Pings the channel’s called number back and forth. If no arguments are specified, a system-selected DTMF tone is pinged back and forth. The system-selected DTMF sequence is 01B. Ping-type path confirmation uses the passing and detecting of numeric DTMF tones between the originate and terminate channels to verify the channel. Here is how it works: 1 An originate channel with path confirmation configured performs a call setup to a terminate channel that also has an identical path confirmation configuration. 2 After answering the call, the terminate channel waits a configurable delay (cut-through-time), and then sends out a sequence of numeric DTMF tones. The default value for cut-through-time is 800 milliseconds. 3 After the correct reception of this tone sequence, the originate channel pings the same sequence back to the terminate channel. 4 After receiving the correct tone sequence back, the terminate channel again pings the sequence back to the originate channel. 5 Repeats steps 3 and 4 for the duration of the call. Path confirmation for a call is successful if all the DTMF tones are received in the correct order. If the configured duration of a call is 0, at least one path-confirmation sequence is attempted from both endpoints after the call is established. The options for the path-confirmation parameter are described below. These parameters only take effect when path-confirmation type ping or path-confirmation type 3-tone-slope is specified. Note To return a path-confirmation parameter to its default value, prefix the configuration statement with no. For example: no path-confirmation type. Specifying 3-Tone Slope path-confirmation type 3-tone-slope [freq-1 freq-2 freq-3] [duration duration [milliseconds] [full-duplex] [dsp-det]] Instead of dialing DTMF tones, 3-tone-slope path confirmation sends three continuity tones back and forth. You can configure any three tones in an ascending order between 300 Hz to 3400 Hz of at least 100 Hz apart. The default tones are 404 Hz, 1004 Hz, and 2804 Hz. You can also specify the duration of each tone (the default is 400 milliseconds). Cisco Company Confidential Voice Call Type Module 6-9 Path Confirmation By default, the path confirmation works at half-duplex fashion, repeatedly sending and receiving tones alternatively. To repeatedly send and receive tones simultaneously, specify full-duplex. This helps to verify whether echo or crosstalk degrades the voice path during a conversation. The parameters digit-on-time and digit-off-time have no effect on this type of path confirmation. If the dsp-det option is specified, Callgen utilizes the DSP to detect the incoming tones. If this option is not specified (default), Callgen utilizes the CPU resources to detect the incoming tones. Note The dsp-det feature is not supported on platforms using NextPort DSP, such as as5400, as5400HPX, and as5850. An example of two-stage dialing using 3-tone slope path-confirmation is: Originate: called-number 408 script {ps 2 sd 5258414} path-confirmation type 3-tone-slope Terminate: called-number 5258414 path-confirmation type 3-tone-slope path-confirmation type 3-tone-slop [play audio-file-tag ] Supports Skinny images in Callgen release 3.2 and release 4.0T or newer. You can configure this path confirmation for the VoIP (H.323 and SIP) or EFXO (emulated IP phone) interfaces. It also works for telephony interfaces, but it’s not recommended. Use all the default parameter settings if you use the provided audio file 3tone_s.au (available at /auto/autons/vts/audio/). This feature demands CPU resources to play out the tone file and detect the incoming tones. Note If you configure 3-tone path confirmation in a topology with one side as telephony and the other side as VOIP/Skinny IP phone, you need to make sure that the tone file used on VOIP/Skinny IP phone channels is matched with the tones configured on the telephony channels. Specifying Continuity Test (COT) Path Confirmation path-confirmation type cot {single I continuous} COT path confirmation only works for telephony interfaces. If single mode is specified, COT is only performed once. If continuous mode is specified, the test is run repeatedly until the call duration expires. Configuring path-confirmation digit-on-time/digit-off-time has no effect on COT path confirmation. Unlike other path confirmation types, for COT path confirmation, it is recommended that you specify a cut-through time as accurate as possible to guarantee the end-to-end synchronization of the originate and terminate channels. Other path confirmation types are asynchronous, so the requirement of cut-through time is loose: larger than the actual cut-through time and less than timeout. The following is an example for PRI back-to-back connection: channel 2 type voice mode originate duration 20 seconds 6-10 Callgen User Manual Cisco Company Confidential Specifying Error Tolerance inter-call-delay 2 seconds called-number 8983212 path-confirmation type cot single path-confirmation time-out 5 seconds interface port:l:D channel 2 type voice mode terminate called-number 8983212 path-confirmation type cot single path-confirmation cut-through-time 0 seconds path-confirmation time-out 5 seconds interface port:l:D Specifying Error Tolerance path-confirmation error-tolerance percentage Specifies an acceptable level of errors. As long as the average error percentage remains within this tolerance, the call stays up and is considered confirmed upon completion. If at any time the average error percentage exceeds the error tolerance, the call is immediately disconnected. To tolerate all errors, specify 100. The default is 0. For example, the following specifies an average error percentage of 20 percent: path-confirmation error-tolerance 20 Specifying Error Threshold path-confirmation error-threshold {end-of-call I n_digits } Specifies how many digits to receive before adhering to the error tolerance specified with the error-tolerance command. This prevents calls that might encounter errors at the beginning of the call from being prematurely disconnected. The following indicates that 15 digits should be received before Callgen starts disposing of calls based on the error tolerance. For instance, suppose error tolerance is set at 20 percent, and the first two of three digits received during path confirmation are in error (such as wrong digit or timeout). This is an average error percentage of 66 percent, which is greater than our tolerance. However, because an error threshold of 15 is specified, the call is not disconnected. path-confirmation error-threshold 15 The following indicates that Callgen calculates the average error percentage at the end of the call. It is not disposed in the middle of its duration, although the instant error percentage might be greater than the specified error tolerance. path-confirmation error-threshold end-of-call Specifying Time Terminate Channel Waits to Send Path Confirmation path-confirmation cut-through-time n [milliseconds I seconds] Specifies how long a terminate channel waits before sending path confirmation. It is required because, in many cases, a terminate channel answers a call and starts sending DTMF tones before the originate channel’s voice band is available, causing the initial DTMF tones to be missed. For ping path confirmation, this parameter specifies the minimum delay the channel waits before sending the first digit in the configured DTMF sequence. For script path confirmation, it is the Cisco Company Confidential Voice Call Type Module 6-11 Path Confirmation minimum delay the channel waits before executing the script. The default is 800 milliseconds. Configure this parameter based on the network topology. Examples: path-confirmation cut-through-time 1200 milliseconds path-confirmation cut-through-time 3 seconds Specifying Length of Time to Wait for a Tone path-confirmation time-out n [{[seconds]! milliseconds}] [subseq »z [{[seconds]! milliseconds}]] Value n specifies how long a channel waits for the first tone in a DTMF sequence in a ping path-confirmation case or monotone sequence in a 3-tone (half-duplex) path-confirmation case. The 3-tone path-confirmation includes 3-tone, 3-tone play, and 3-tone dsp-det. The default is 15 seconds. Value m specifies how long a channel waits for the subsequence tone in a DTMF sequence in a ping path-confirmation case or monotone sequence in a 3-tone (half-duplex) path-confirmation case. The 3-tone path-confirmation includes 3-tone, 3-tone play, and 3-tone dsp-det. The default is 6 times the tone on duration. For example: path-confirmation time-out 5 seconds subseq 3 seconds Note For version 4. IT or earlier, this specifies how long a channel waits for each tone in a DTMF sequence in a ping path-confirmation case or monotone sequence in a 3-tone path-confirmation case. Note For “path-confirmation type cot {single I continuous},” “path-confirmation type 3-tone full-duplex,” and “path-confirmation type resilient,” only the first value of “path-confirmation time-out” is applied, that is, subseq timeout is not being used. Specifying Delay Between Tones path-confirmation digit-off-time n [milliseconds] Specifies the delay between sending each DTMF tone in a sequence. The default is 150 milliseconds. For example: path-confirmation digit-off-time 300 milliseconds Specifying Tone Duration path-confirmation digit-on-time n [milliseconds] Specifies the duration of each DTMF tone in a sequence. The default is 50 milliseconds. For example: path-confirmation digit-on-time 150 milliseconds 6-12 Callgen User Manual Cisco Company Confidential Specifying Tone Tolerance Specifying Tone Tolerance path-confirmation tone-tolerance n [hertz] Specifies the tolerance, plus or minus, of a receiving tone to be acknowledged as an expected tone when performing 3-tone-slope path confirmation, without the dsp-det option. The default is 100 Hz. For instance, if 2804 Hz is expected, any receiving tone ranging from 2705 to 2903 Hz is regarded as a correct reception. For example: path-confirmation tone-tolerance 200 hertz Setting the Delay After a Tone path-confirmation post-sending-delay n [milliseconds] Sets the guard time to the next script command after sending a string of DTMF tones. Different interfaces require different delays after sending DTMF tones to ensure the last digit was sent and to avoid receiving echo in the tear-down phase. The default is 600 milliseconds. For example: path-confirmation post-sending-delay 300 milliseconds Testing Transmission Quality of UUTs path-confirmation type resilient freq vaf VAF% tone-on-time duration max-hit hit-duration Tests the transmission quality of units under test (UUT). A channel with this configuration sends a relatively long duration of a tone (4 to 10 seconds) and simultaneously expects to receive a different tone (>200 Hz difference) from the other end. The vaf (voice activity frequency) parameter specifies the duty-cycle of the tone (percentage of tone-on in a period). It is useful for generating different voice traffic loads on UUTs if vad (default) has been configured in the corresponding VoIP dial peers. The max-hit parameter defines the maximum tolerable duration of a hit, which is an interrupted silence among voice activity, and is called clip if happening at the beginning or ending edge. The path confirmation fails if a hit or a clip has been detected with a duration greater than max-hit (milliseconds). Resilient path confirmation requires the two sides having tone frequencies >200 Hz apart and exactly the same vaf and tone-on-time. A bonus statistic of resilient path confirmation is that counts of hits and clips during a call are reported in channel statistics when using the show channel command (see Displaying Channel Information (page 4-12) ). It should always be less than max-hit.You can specify the threshold-hit duration by voice-quality hit-threshold n milliseconds. The default is 200 milliseconds. Things to Note When Using Path Confirmation For the following information, consider ping path confirmation implemented and behaving as its script equivalent. • A call is disconnected in the middle of a script only if the remote end disconnects or the script times out waiting for a tone. The configured call duration is ignored, unless the script ends with the Is instruction (loops until duration expires). • When sending DTMF tones, the digit-off-time is also applied before the first digit is sent. Thus, if a script includes sd 1234, the actual cut-through delay is configured cut-through-delay + configured digit-off-time. • When originating or terminating calls over a VoIP interface with path confirmation, refer to the following configuration: Cisco Company Confidential Voice Call Type Module 6-13 FXO Loop-start Emulation Originate Router (10.0.1.5): Dial-peer configuration: dial-peer voice 1001 voip destination-pattern 525.... dtmf-relay h245-alphanumeric h245-signal session target ipv4:10.0.3.6 Callgen configuration: channel 1 type voice mode originate duration 3 minutes inter-call-delay 3 seconds calling-number 5270001 called-number 5250001 path-confirmation type ping interface voip:1001 Terminate Router (10.0.3.6): Dial-peer configuration: dial-peer voice 2001 voip destination-pattern 527.... dtmf-relay h245-alphanumeric h245-signal session target ipv4:10.0.1.5 Callgen configuration: channel 1 type voice mode terminate called-number 5250001 path-confirmation type ping path-confirmation cut-through-time 2 seconds interface voip:2001 FXO Loop-start Emulation emulate fxo-loop-start {on I off} Terminates calls on CAS interfaces, where fxo-loop-start emulation is desired. This is a special requirement for when the router’s CAS interface is connected to a channel bank, and the Callgen terminate router needs to accept the incoming setup indication similar to an FXO interface. The on option turns on fxo-loop-start emulation. The default is off. This command is configurable on terminate channels only. Q.SIG Messaging Callgen provides ISDN Q.SIG messaging to tunnel Q.SIG messages between endpoints (originate and terminate channels). The Q.SIG messages support is based on Symphony’s raw message API to pass the messages along with Q.931 signaling messages. Currently, we only support the Q.SIG messaging in CALL SETUP. The Q.SIG message is manually entered in the originate channel from the CLI with the format of two hexdecimal digits separated by blank spaces. Three call types are available: basic, signal-only, and dummy-facility. The terminate channel receives the Q.SIG messages and stores in-channel statistics information. The syntax is: [no] q931 setup hexdecimal-string [no] qsig-calltype {basic-call I sigonly I dummy-facility} [no] qsig-message {on I off] 6-14 Callgen User Manual Cisco Company Confidential ISDN Overlap Dialing For example, to make a signal-only call with called number 5678, you first need to configure the ISDN switch type to primary-qsig and the appropriate pri-group for both the originate and terminate Callgen router. Originate channel configuration: channel 1 type voice mode originate q931 setup "A1 04 02 A8 80 18 01 AC 6C 06 21 83 70 05 A1 35 36 37 38" qsig-calltype sigonly qsig-message on Terminate channel configuration: channel 2 type voice mode terminate qsig-calltype sigonly qsig-message on To display the raw message received in the terminate channel: (callgen) show chan 2 Channel 2 Call Statistics last abnormal disconnect cause: 0 RawMsg: 04 02 A8 80 18 01 AC 6C 02 21 83 70 05 A1 35 36 37 38 To make a basic call with called number 5678: Originate channel configuration: channel 1 type voice mode originate q931 setup "A1 04 03 80 90 A3 18 03 A9 83 81 70 05 A1 35 36 37 38" qsig-calltype basic-call qsig-message on Terminate channel configuration: channel 2 type voice mode terminate qsig-calltype basic-call qsig-message on To display the raw message received in the terminate channel: (callgen) show chan 2 Channel 2 Call Statistics last abnormal disconnect cause: 0 RawMsg: A1 04 03 80 90 A3 18 03 A9 83 81 70 05 A1 35 36 37 38 ISDN Overlap Dialing There are several ISDN switch types that support overlap-receiving on IOS routers. In this mode, the interface waits for additional call-control information, such as partial DNIS digits. To test such a feature, Callgen enables overlap-dialing to send a complete called number, digit by digit, via a series of INFORMATION messages. The syntax is: [no] isdn-overlap-dialing {off I on [no-eomplete] [init-digits n |} If you use the no-complete option, “no complete” is enclosed in the INFORMATION message that carries the last digit to indicate DNIS completion. Usually the receiving gateway or PBX relies on Cisco Company Confidential Voice Call Type Module 6-15 Making Calls Using SIP the ISDN T302 timer to determine the end of DNIS collection. The default is to enclose COMPLETE along with the last digit. If isdn-overlap-dialing is configured in a channel with an ISDN interface, the Q.931 SETUP message includes no digits or the first few digits of the configured called number. The remaining digits are then sent in the following INFORMATION messages, one digit at a time. To control the timing of sending overlap-dialing digits, use the commands path-confirmation post-dialing pdd , path-confirmation digit-on don, and path-confirmation digit-off doff. Note Although these commands use the prefix “path-confirmation,” they have nothing to do with path confirmation; it is just to borrow existing commands for convenience. The first overlap-dialed digits (the second digit in the called number) is sent pdd+don+dojf milliseconds later than the SETUP message (which carries the first digit). Later, the overlap-dialed digits are sent in order with an interval of don+dojf milliseconds. You can use init-digits n to specify the number of the called-number digits, from 0 to 32, to send in the SETUP message. The default is 0. Making Calls Using SIP The Cisco Session Initiation Protocol (SIP) functionality, introduced in Cisco IOS release 12.1(1)T and enhanced in Cisco IOS release 12.1 (3)T. enables Cisco access platforms to signal the setup of voice and multimedia calls over IP networks. The supported platforms are Cisco AS5300 access servers, and Cisco 2600 and 3600 series routers. To make a SIP call using Callgen, configure the dial peers to initiate the SIP session instead of the H323 session. For example: dial-peer voice number voip session protocol sipv2 The call received by the next gateway router can be transferred to either a POTS or VoIP dial peer. To configure a SIP call transfer for a POTS dial peer, enter the following: dial-peer voice number pots application session destination-pattern pattern port slot/port To configure a SIP call transfer for a VoIP dial peer, enter the following: dial-peer voice number voip application session destination-pattern pattern session target ipv4:x.x.x.x For detailed information, see “Enhancements to the Session Initiation Protocol for VoIP on Cisco Access Platforms” at http://www.cisco.com/univercd/cc/td/doc/product/software/iosl21/121newft/ 121t/121t3/dtsipgv2.htm In the following example, Callgen is making a SIP call over the IP network. The terminating gateway receives the call and transfers it to a POTS dial peer back to the Callgen router. 6-16 Callgen User Manual Cisco Company Confidential Making Calls Using SIP SUT Callgen configuration: channel 1 type voice mode originate duration 1 min inter-call-delay 3 sec called-number 5170000 interface voip:500 channel 2 type voice mode treminate called-number 5170000 interface port:l/l/0 Callgen IOS configuration: dial-peer voice 500 voip destination-pattern 517.... session protocol sipv2 session target ipv4:10.0.2.46 codec g711ulaw no vad Gateway IOS configuration: dial-peer voice 600 pots application session destination-pattern 517.... port 2/0/0 In the following, the Callgen router is making a POTS call to a gateway, which makes a SIP call over the IP network. The call is eventually terminated in the Callgen router. SUT Cisco Company Confidential Voice Call Type Module 6-17 Measuring End-to-End Jitter Callgen configuration: channel 3 type voice mode originate duration 1 minutes inter-call-delay 3 seconds calling-number 5551212 called-number 5170000 interface port:l/0/0 channel 4 type voice mode terminate called-number 5170000 interface voip:600 Callgen IOS configuration: dial-peer voice 10005 pots application CALLGEN_VOICE_CTM group 1 direct-inward-dial port 1/0/0 dial-peer voice 600 voip application callgen_voice_ctm incoming called-number 5170000 session protocol sipv2 codec g711ulaw no vad Gateway IOS configuration: dial-peer voice 500 voip destination-pattern 517.... session protocol sipv2 session target ipv4:10.0.2.39 codec g711ulaw no vad Measuring End-to-End Jitter voice-quality type end-to-end-jitter [simplex {send-only I receive-only}] [period n [milliseconds]] It is not unusual for consecutive voice packets to suffer from jitter effect after they have been delivered across networks. Though the receiving end may remove jitter by various buffering schemes, a typical network congestion could easily lead to audible jitter effect. Callgen measures jitter by sending test tones periodically on one side and taking the time difference of every two consecutive arriving tones on the other side. To get the jitter measurement, we subtract the time difference from the testing period. Note that we are measuring voice jitter, not packet jitter, so there might not be voice jitter but packet jitter exists. However, this is an expected behavior as long as jitter buffering works fine. Ideally, test tones arrive precisely in the period that the sending side sends (a jitter of zero). If a test tone arrives early, the time difference to the previous tone is shorter than the testing period, so jitter is negative, which is called lead jitter. If a test tone arrives late, jitter is positive, which is called lag jitter. Two modes do the measurement of end-to-end jitter: duplex mode and simplex mode. In duplex mode, both the originate and terminate channels send and receive tones and do the measurement. In simplex mode, one channel is configured as send-only and the other as receive-only. The send-only channel sends the tones and does not do measurements. The receive-only channel receives the tones and does the measurements. 6-18 Callgen User Manual Cisco Company Confidential Measuring End-to-End Delay In this example configuration of jitter measurement, the originate channel and terminate channel do not need to be on the same Callgen router when running a jitter measurement: channel 1 type voice mode originate duration 3 minutes called-number 5250001 voice-quality type end-to-end-jitter interface port:0:0 channel 2 type voice mode terminate called-number 5250001 voice-quality type end-to-end-jitter interface port:1:0 If you use the show channel num command to view the test results, you would see something similar to the following: current end-to-end lead jitter: 1%, min: 10ms, max: 20ms, avg: 12ms current end-to-end lag jitter: 1%, min: 4ms, max: 20ms, avg: 10ms The percentage, 1% in this example, indicates how frequently jitter was detected. Min, max, and avg indicate the range of the 1% measurements. The following output of the show chan voice-quality command shows the average jitter, which is calculated by multiplying the above percentage with the amount specified by “avg.” The plus or minus (-/+) indicates whether the jitter is lead or lag. ch-l-vo-o, state: HOLD, CSR: 0.000%, avg-psqm: 0.000, avg-jtr: -0.1/+0.1, tone-err: 0%, hit: 0, clip: 0, avg-e2e: 0, avg-rtt: 0, echo: na/0/0 avg-pesq: 0.000 Currently, jitter measurement works better with digital interfaces, but suffers interference from echos with 2-wire analog (FXS/FXO) interfaces, so we recommend using the following configuration to train the echo canceller first: script {sd 1234567890 Is 20} Measuring End-to-End Delay voice-quality type end-to-end-delay to-channel n [simplex {send-only I receive-only}] [correction duration [milliseconds]] To measure the latency of voice from one end to the other end, the originate and terminate channels must be on the same Callgen router. The to-channel parameter specifies the partner channel to do the measurement in the opposite direction. The partner channel of an originate channel must be the unique terminate channel answering its calls. On the other hand, the partner channel of a terminate channel must be the unique originate channel calling it. It is crucial to give a correct partner channel to make a legal measurement. Note You need to be careful if you are used to assigning the whole trunk Tl/El interface with a single called number. End-to-end delay measurement requires each channel has a unique called number on a Callgen router. Two modes do the measurement of end-to-end jitter: duplex mode and simplex mode. In duplex mode, both the originate and terminate channels send and receive tones and do the measurement. In simplex mode, one channel is configured as send-only and the other as receive-only. The Cisco Company Confidential Voice Call Type Module 6-19 Measuring End-to-End Delay send-only channel sends the tones and does not do measurements. The receive-only channel receives the tones and does the measurements. Since the measurement includes the processing delay on the local router, usually 5 to 15 milliseconds, you might want to subtract it from the measurements by specifying the correction parameter. To obtain an accurate correction duration, you could connect the two voice ports back-to-back and do end-to-end delay measurement with a correction of 0 (the default). The reported average delay after a one-hour test should be a good estimation of the processing delay. If you are using the network-side image for PRI calls, you have to boot the router with a regular image and configure one voice port as the network side to enable back-to-back connection to do an estimation of processing delay. This is done by going into the serial:23 (Tl) or serial: 15 (El) and using the following command sequence: isdn net, shut, no shut. To recover the misalignment of IOS clock and DSP clock caused by different timing granularities, Callgen employs a phase-locking algorithm to ensure the measurements to a +(-l) millisecond accuracy. However, if the latency happens to fluctuate intensely, for example UUTs with larger jitter or using low-bit-rate codec, Callgen is not be able to lock the phase and a successful measurement cannot be made. In that case, you have to explicitly disable the phase-locking by configuring voice-quality phase-locking off in both channels doing end-to-end delay measurement. This results in a looser range of accuracy. Nevertheless, since the errors are symmetric and equiprobable to the actual value at positive and negative directions, the average value after a long run should be a good enough measurement. The measurement result is included in channel statistics (using the show channel man command). The maximum, minimum, and average delay is reported together with the number of measurement, which somewhat indicates how much you could trust the average value. The following is an example setup and CAS configuration to measure processing delay (T1/0 connects to T1/1 back-to-back). Or ig/ Term channel 1 type voice mode originate duration 1 hour called-number 5250001 voice-quality type end-to-end-delay to-channel 2 interface port:0:0 channel 2 type voice mode terminate called-number 5250001 voice-quality type end-to-end-delay to-channel 1 interface port:1:0 Say after one hour, the reported average delay is 11 milliseconds in channel 1, and 9 milliseconds in channel 2. Now you can connect Tl/0 to the system under test (SUT) and T1/1 back from SUT and use the following setup and configuration to measure the end-to-end delay. 6-20 Callgen User Manual Cisco Company Confidential Measuring Round-Trip Time channel 1 type voice mode originate duration 1 hour called-number 5250001 voice-quality type end-to-end-delay to-channel 2 correction 11 interface port:0:0 channel 2 type voice mode terminate called-number 5250001 voice-quality type end-to-end-delay to-channel 1 correction 9 interface port:1:0 Then after another hour, say the reported average delay is 75 milliseconds in channel 1 and 71 milliseconds in channel 2, we could say in the past hour the end-to-end delay from originate to terminate is 71 milliseconds, and from terminate to originate is 75 milliseconds in average. Measuring Round-Trip Time voice-quality type round-trip-time Measuring round-trip time (RTT) is a bonus feature associated with end-to-end delay measurement. This is because the end-to-end delay measurement runs in a full-duplex fashion, so Callgen will not have a problem to listen to its looped-back test tone even when the tone is still under sending. To make a loopback end to terminate a call and echo voice back to the originate router, you could configure a dial peer on the remote end similar to the following example: dial-peer voice 8100 voip destination-pattern 525.... session target loopback:rtp With this dial peer, all calls to 525.... are answered by the remote router and all following voice gets echoed (Note that you need to load the router with an image including fix to CSCdp02879. Or, simply use a Callgen image after release 2.1.) A typical setup is illustrated below. Callgen Or ig/Term GW1 Loopback: rtp GW2 The following is an example of a typical Callgen configuration on the originate side (you do not need terminate channels to terminate calls in a loopback setup). Cisco Company Confidential Voice Call Type Module 6-21 Measuring Echo channel 1 type voice mode originate duration 30 minutes inter-call-delay 5 seconds calling-number 5270001 called-number 5250001 voice-quality type round-trip-time interface port:0:D Note You do not need to configure Callgen to terminate VoIP calls if you already have an RTP loopback. However, configuring a Callgen terminate channel is probably easier than configuring an RTP loopback if you do have a Callgen image there. In fact, if a Callgen image is running on the terminate router, RTP loopback has no effect (it is ignored by Callgen). There are some advantages of measuring RTT instead of end-to-end delay. First, a loopback saves the hassles of configuring different called numbers and specifying partner channels, which are required for the end-to-end delay measurement. Second, you do not need to change physical wiring to connect a call back to the originate router; hence, it saves one interface port. However, the price is that RTT does not directly account for an end-to-end quality. Also, QoS of voice traffic might not guarantee the latency of return trip so that RTT becomes less informative in helping to perceive an end-to-end quality of the system under test. To view the current statistic of measurement, use the show channel num command to list the minimum, maximum, and average of RTT measured so far on that channel. Measuring Echo voice-quality type echo [period n [milliseconds]] In most cases, echo is caused by an impedance mismatch in the hybrid when doing a 4-wire to 2-wire conversion. It could happen at a near-end or a far-end PBX or Telco switch. Usually, the near-end echo is tolerable and, in fact, is sometimes preferable since it makes the voice richer, but far-end echo could be annoying to a conversation. Two key metrics that echo testing checks are delay, which is the round-trip time of the spoken voice, and energy loss, which is the attenuation of the voice leaking back. Callgen does echo measurement by having one side be silent after a call connection while the other side keeps sending random tones. The incoming voice activity is monitored concurrently. Any incoming voice spurt is regarded as an echo of the most recent test tone sent, since the remote end remains silent. Echo delay is calculated as the time difference between sending the test tone and when the echo is received. Energy loss is calculated by measuring the attenuation of the peak instantaneous energy of the sent and received tones. The following is an example of measuring echos perceived by the originate side. To measure echos perceived by the terminate side, move voice-quality type echo from channel 1 to channel 2. The originate channel and terminate channel do not need to be on the same Callgen router when running a echo measurement. channel 1 type voice mode originate duration 3 minutes called-number 5250001 voice-quality type echo interface port:0:0 channel 2 type voice mode terminate called-number 5250001 interface port:1:0 6-22 Callgen User Manual Cisco Company Confidential Logging Out-of-Bound Latency Measurements To avoid interference by ring-back tones or incoming DTMF tones for analog interfaces, include the following with the voice-quality statement: script {ps 6} If you use the show channel man command to view the test results, you would see something similar to the following. The threshold of the short and audible echo is 50 milliseconds. short echo: min: 3ms/-22dB, max: 22ms/-36dB, avg: 8ms/-26dB (46 tones) audible echo: min: 158ms/-36dB, max: 364ms/-24dB, avg: 201ms/-28dB (9 tones) echo-cancellation convergence: 1840ms ACOM: 39dB In the output, ms is the delay, dB is the energy loss, and tones is how many successful measurements have been collected so far. The convergence time is the aggregate duration of voice activity required to train an echo-canceller to attenuate echo down to a sufficient low volume. ACOM (combined attenuation) is the total round-trip loss of signal energy. The shorter the former and the larger the latter indicates a better echo-cancellation algorithm. The output of the show chan voice-quality command gives a more concise presentation. For example, you might get one of the following displays: ch-l-vo-o, state: INACTIVE, CSR: 0.000%, avg-psqm: 0.000, avg-jtr: -0.0/+0.0, tone-err: 0%, hit: 0, clip: 0, avg-e2e: 0, avg-rtt: 0, echo: na/0/0 avg-pesq: 0.000 ch-l-vo-o, state: HOLD, CSR: 0.000%, avg-psqm: 0.000, avg-jtr: -0.0/+0.0, tone-err: 0%, hit: 0, clip: 0, avg-e2e: 0, avg-rtt: 0, echo: nc/201/28 avg-pesq: 0.000 ch-l-vo-o, state: HOLD, CSR: 0.000%, avg-psqm: 0.000, avg-jtr: -0.0/+0.0, tone-err: 0%, hit: 0, clip: 0, avg-e2e: 0, avg-rtt: 0, echo: cv/1840/39 avg-pesq: 0.000 “na/0/0” indicates that the measurement is not available, “nc/201/28” stands for not converged, but the current average audible delay is 201 ms, and the average energy loss is 28 dB. “cv/1840/39” indicates that echo cancellation has converged, with a convergence time of 1840 ms and an ACOM of 39 dB. You also might want to measure the echo return loss (ERL) and echo return loss enhancement (ERLE) of a system. ERL is the average energy loss with echo-canceller disabled. ERLE is the difference of ACOM with echo-canceller enabled to the average energy loss without echo-cancellation. Logging Out-of-Bound Latency Measurements While performing an end-to-end-delay or round-trip-time test, you might want to log abnormal measurements that fall outside a predefined range. To specify the range, use the following configuration (time unit is milliseconds): voice-quality logging latency longer-than msl [shorter-than ms2] Logging Voice Quality Measurement Values Externally You can log all recorded voice quality measurements, like end-to-end-delay and jitter, in an external file, using the following command. Before performing external logging, touch the specific file in the TFTP server. The file permissions must be at least -rwxrw-rw-. channel startChannel# [- endChannel#] perform external-logging Cisco Company Confidential Voice Call Type Module 6-23 Clearing Voice Quality Statistics The following is an example of the type of information that would be logged. global type voice path 1 tftp://10.0.2.10/pnedunur/ch#l_e2e channel 1 type voice mode originate called-number 123456 duration 60 s voice-quality type end-to-end-delay to-channel 2 voice-quality logging external path 1 interface port:2/0:0 channel 2 type voice mode terminate called-number 123456 voice-quality type end-to-end-delay to-channel 1 interface port:2/l:0 Clearing Voice Quality Statistics You can clear a channel’s voice quality statistics either after every call is made or by explicitly clearing the channel counters (until-global-clear option). By default, voice quality statistics are not cleared “until-global-clear.” chan n clear-vq-stat {per-call-basis I until-global-clear} PSQM Callgen currently implements path confirmation by dialing DTMF tones back and forth between originate and terminate units. One of the drawbacks to this approach is that DTMF tones do not generate the same traffic pattern as voice. In addition, the success and failure of passing DTMF tones over a voice path does not necessarily match the receiving quality if voice was sent instead. Therefore, to monitor the voice quality of connections, Callgen uses PSQM, an implementation of ITU-T standard P.861 that specifies the methodology to obtain subjective speech scores by analyzing the recorded and reference voice clips. PSQM has been implemented and incorporated in the Cisco Voice Quality Test (VQT) system. To this, Callgen has added extensions to develop a remote PSQM computation server. Callgen itself provides the functions of audio file playback and recording on routers. For more information about PSQM, see http://wwwin-eng.cisco.com/Eng/NUBU/WWW/ Voice/TISU-Test/Tools/VOT overview.pdf . Measuring Speech Quality Using PSQM You cannot use the current implementation of voice quality measurement with path confirmation, because they both need to pass audio or tones in-band. Also, you have to set up a PSQM server before starting a channel with a PSQM configuration (see Setting Up a PSQM Server, page 6-27 ). The way PSQM works is similar to that of path confirmation: 1 An originate channel with voice quality configured performs a call setup to a terminate channel that also has an identical voice-quality configuration. 2 After answering the call, the terminate channel tests the connection of the terminate router and the PSQM server and then waits for the originate router to do the same test. Once both sides pass the connection test, they are ready to perform voice-quality measurement. 3 The originate channel starts recording voice incoming from the channel, and the terminate channel starts playing a reference audio file to the channel. 6-24 Callgen User Manual Cisco Company Confidential Measuring Speech Quality Using PSQM 4 After recording the whole audio content, the originate channel writes the recorded content to the PSQM server for score calculation and then starts to play the reference audio file, and the terminate channel starts recording the incoming voice. That is, they switch the roles of recorder and player. 5 After recording the whole audio content, the terminate channel writes the recorded content to the PSQM server for score calculation. At this point, both sides wait a configurable delay (psqm-inter-delay) to allow the PSQM server to finish the calculation. 6 Repeats steps 3 to 6 for the duration of the call. If the configured duration of a call is 0, each side functions as a recorder and a player at least once to finish an iteration. To configure a channel for performing PSQM, include the following channel configuration: voice-quality type psqm audio-file file-tag [{sync {3-tone I dtmf I tone frequency duration} I no-sync}] [align-check] voice-quality psqm-server lP_addr path path-tag protocol where: file-tag specifies the audio file to be played. sync specifies the type of tones to synchronize both ends in testing PSQM server reachability before running PSQM (default is 3-tone). no-sync skips the PSQM server reachability test. If you are sure that the router has IP connectivity with the PSQM server, specify no-sync to speed up obtaining the first score. However, you need to ping the PSQM server at least once after booting a Callgen router to get the IP route cached. align-check sends extra alignment tone so that the PSQM server can check whether the recording and reference audio files are well aligned. The PSQM server must be started with the alignment checking option. IP_addr is the IP address of the PSQM server. path-tag is the path to accommodate the recorded files on the PSQM server. protocol can be either tcp or udp depending on the kind of socket needed to connect to the psqm-server. The remote PSQM server must also be using the same protocol. If you want Callgen to connect to the PSQM server at a port other than the default (UDP:7861, TCP:7776), use the following command to specify the port on the psqm-server where the server will be running: voice-quality psqm-port port Note Make sure that the protocol and port numbers are the same on the server and the Callgen configuration. Otherwise, the server will not get requests for score calculation. For example, in the following, the source of the audio file is “flash:reference.au’' and the recorded files are written to /tftpboot/spchang/PSQM_FILE on workstation 10.0.2.10: global type voice path 1 tftp://10.0.2.10/spchang/PSQM_FILE audio—file 1 flashireference.au Cisco Company Confidential Voice Call Type Module 6-25 PSQM For some Linux operating systems, the /tftpboot prefix might be required. The default audio file reference.au is included in the PSQM accessory file PSQM-SPARC-xx.tar or PSQM-Linux-xx.tar. You should copy it to the Flash memory of both the originate and terminate routers. The way Callgen detects the end of an audio file during recording is to perform voice activity detection (VAD). Once a configurable duration of silence (max-audio-silence) is detected, the channel stops recording immediately. Therefore, it should be set a little longer than the maximum duration of silence in the reference audio file. Otherwise, a channel stops recording before its counterpart finishes playing. However, it should not be set too long just for the sake of a safe VAD, because then the recorded files will all have a long silent trailing and, hence, reduce the efficiency of the PSQM server. The default value of max-audio-silence is 1.6 seconds. Note In Callgen 3.3, Callgen receives a comfort noise packet after a very short period of silence, which is about 200 milliseconds. Currently, the recording is stopped if the comfort noise packet is received before max-audio-silence is recorded. Since the PSQM calculation is very resource-demanding for a PSQM server, it is suggested to not start too many concurrent channels performing PSQM measurement. Three channels for a Sun SPARC 10 and less than 10 channels for an Ultra SPARC 5 are recommended. Alternatively, you can start more channels by increasing the psqm-inter-delay to make the recording of each channel occur less frequently. Here is an example of a PSQM configuration: global type voice path 1 tftp://10.0.2.10/spchang/PSQM_FILE audio-file 1 flashireference.au channel 1-3 type voice mode originate voice-quality type psqm audio-file 1 voice-quality psqm-server 10.0.2.10 path 1 voice-quality max-audio-silence 500 milliseconds voice-quality psqm-inter-delay 8 seconds called-number 4085258414 inter-call-delay 10 seconds start-to-start-delay 10 seconds interface port:0:D channel 4-6 type voice mode terminate voice-quality type psqm audio-file 1 voice-quality psqm-server 10.0.2.10 path 1 voice-quality max-audio-silence 500 milliseconds voice-quality psqm-inter-delay 8 seconds called-number 4085258414 interface port:l:D The default number of channels doing PSQM is 60. If more channels with PSQM will be running concurrently (for example, 96), use the following configuration: global type voice sys-var psqm-file-pool 96 Note that in this case, at least 96 temporary files have to be pre-touched using the touch_it script described in the next section. To view the PSQM scores, use a command similar to the following when all channels stop running: show chan psqm-scores server-path tftp://10.0.2.10/spchang/PSQM_FILE/trace.txt 6-26 Callgen User Manual Cisco Company Confidential Setting Up a PSQM Server where trace.txt would be trace.html if you specified html when starting the PSQM server program. The above command shows something like the following: PSQM Score Statistics Channel Average Count (0 - 1) (1 - 2) (2 - 3) 1 0.200 8800 2 0.200 7700 3 0.200 7700 4 0.200 8800 5 0.200 7700 6 0.200 7700 Setting Up a PSQM Server Signal processing calculations are very CPU demanding, which is why the Callgen routers write the audio files recorded on the PSQM server (via TFTP). The server then processes the data. Most of the following steps only need to be done once. To run the audio measurements feature, you must copy the binary of the server in the directory of your TFTP server. For optimum results, it is strongly recommended that you have your TFTP server set up locally to your testbed, and that you have a powerful server (avoid Sparc 5). If the TFTP/PSQM server is too busy, you can experience inaccurate poor scores. If you already have a TFTP server running, you can skip the following. There are two kinds of TFTP servers: in.tftpd and tftpd. The main difference is that with in.tftpd you must create the files before, and with tftpd the files are automatically created when needed. To know which one is currently running, use more /etc/inetd.conf: (...) # Tftp service is provided primarily for booting. Most sites run this # only on machines acting as "boot servers." # tftp dgram udp wait root /usr/sbin/in.tftpd in.tftpd -s /tftpboot (...) Installing in.tftpd Step 1 Copy the binary in.tftpd to /usr/sbin if it does not exist. Step 2 Edit the /etc/inetd.conf file and insert the following line (each block is separated by a tabulation): tftp dgram udp wait root /usr/sbin/in.tftpd in.tftpd -s /tftpboot Step 3 Do a ps -A I grep inetd to get the pid of the inet daemon. Do kill -1 pid to tell the daemon to reread its configuration file. Installing tftpd Step 1 Copy the binary tftpd to /usr/sbin if it does not exist. The binary is in /autons/vts/bin/image. Step 2 Create the file tftpd.conf in /etc with the following content: (3 - 4) 0 0 0 0 0 0 (4 - 5) 0 0 0 0 0 0 ( > 5 ) 0 0 0 0 0 0 Cisco Company Confidential Voice Call Type Module 6-27 PSQM defaultDirectory /tftpboot debugLevel 7 inputWait 300 accessList 1 readwrite 0.0.0.0 Oxffffffff defaultAccessList 1 Step 3 Edit the /etc/inetd.conf file and insert the following line (each block is separated by a tabulation): tftp dgram udp wait root /usr/sbin/tftpd tftpd -s /tftpboot Step 4 Do a ps -A I grep inetd to get the pid of the inet daemon. Do kill -1 pid to tell the daemon to reread its configuration file. Setting Up Your Environment Step 1 Create the directory PSQM_FILE in /tftpboot/<username>. Step 2 Download the PSQM accessory file PSQM-SPARC-xx.tar or PSQM-Linux-xx.tar to /tftpboot/<username>/PSQM_FILE /Use the command tar xvf PSQM-xxxxx-xx.tar to unpack all accessory files. Step 3 Pre-touch the recorded files. The following script creates the files needed by the routers to check if the TFTP server is reachable as well as to touch all possible filenames of recorded files. The username is the name on the PSQM server. touch_it {in.tftpd I tftpd} username router_name [number_of_files\ For example, in the following the username is “spchang” on the PSQM server, and a Callgen router named “cg-5 300-1” will be used for PSQM measurement: touch_it in.tftpd spchang cg-5300-1 96 If you have two Callgen routers, you must do this for each router_name. The default number_of Jiles touched by the script is 60. If your test has to run more than 60 concurrent channels with PSQM, use the number_of_fdes parameter. Step 4 Make sure that all the appropriate rights are turned on (use chmod 666 *). Running the Server You can run the PSQM server with the following options: -m—Specifies whether the PSQM scores are calculated in real time, or whether the server saves the PSQM requests offline and then runs the server in batch mode to handle all the commands. The options are realtime, offline, and batch. Offline mode queues PSQM score calculation requests from remote routers in a file named jobs. This offline feature is beneficial for slow servers, because the scores are not calculated immediately but calculated on request by running the server in batch mode. Note The jobs file is not created unless you run the touch_it utility provided. It also creates a temp/ folder to store the audio files for which the scores need to be calculated. -x—Specifies the name of the tftpd program used on the TFTP server. The options are in.tftpd (the default) or tftpd. 6-28 Callgen User Manual Cisco Company Confidential Reviewing Results -p—Specifies the transfer protocol of the message socket with Callgen. The options are tcp or udp (the default). -1—Specifies the port on which the PSQM server runs, ranging between 1024 and 10,000. This command allows you to run multiple PSQM servers on the same machine and process requests from different Callgen routers. -r—Specifies the reference audio file that the PSQM function uses for its calculations. The file is in 16-bit linear format. The default is reference.bin. -a—Specifies strict file-size checking. By default, this is turned off. -b—Specifies a bad score threshold. If the calculated PSQM scores are greater than the value specified, they are recorded in /tftpboot/<username>/PSQM_FlLE/BAD_AUDIO/ for later review. -o—Specifies the file format for the PSQM scores. Generates either trace.txt or trace.html, depending on the option selected: text (the default) or html. -w—Specifies what type of audio wave form to generate. If you specify 1, only the recorded audio wave form is plotted. If you specify 2, it plots the recorded and referenced audio wave forms together on one plot. You must specify the -o html option, since the plot is generated on an html file. If you do not specify any options when running the server (that is, you start the server using the command server_psqm), the default parameters are used, which is equivalent to the following: server_psqm -m realtime -x in.tftpd -p udp -r reference.bin -b 3.0 -o text -1 7861 If the server does not run, most likely it is a problem with the ucb library. Add the following line to your .cshrc file: setenv LD_LIBRARY_PATH $LD_LIBRARY_PATH":"/usr/ueblib If you type server_psqm, the following should appear, indicating that the server is now ready: PSQM Server Program Version 3.2 Copyright (c) 2000-2001 by Cisco Systems, Inc. To display usage: server_psqm -h Following shows tftpd= protocol/port= reference= threshold= html trace= waveform plot= alignment= current setting: in.tftpd UDP/7861 reference.bin 3.000 No No No Wait for requests from Callgen... Reviewing Results Once everything is running, you can view the result on the console or in the file trace.txt. For example PSQM 0.202 out:0.00% (xcorr:85% MSR:13.4) (cg-5300-1 ch#0001) 00:03:40.767 PSQM 0.218 out:0.00% (xcorr:90% MSR:12.5) (cg-5300-1 ch#0002) 00:04:10.747 PSQM 3.299 out:30.05% (xcorr:51% MSR:4.1) (cg-5300-2 ch#0001) 00:04:14.139 PSQM 0.198 out:0.00% (xcorr:89% MSR:19.0) (cg-5300-2 ch#0002) 00:04:44.015 PSQM 0.200 out:0.00% (xcorr:8 8% MSR:18.8) (cg-5300-1 ch#0001) 00:04:47.435 The output contains the following information: Cisco Company Confidential Voice Call Type Module 6-29 PSQM • The first number (for example, 0.202) is the PSQM score. This score is highly correlated with a corresponding MOS score: if you have a good PSQM score, you would have a good MOS score in most of the cases. Be aware that a PSQM score is to a certain extent the inverse of a MOS score: 0 is perfect. If you have a score under 2, the quality is good. If you have a score above 5, it basically means that you have bad quality. Between 2 and 5, the quality might or might not be acceptable, so it should be checked further. • The second number (for example, 0.00%) is the percentage of outliers. The PSQM algorithm is performed for every frame of 256 samples, and it then issues a score. The final PSQM score is the average of all the scores. An outlier is a score that is not close enough to the average. • The numbers following xcorr and MSR (Max-to-Second-Ratio) are explained in the section Cross-Correlation and MSR Values (page 6-30) . since some background on pseudorandom sequence and the cross-correlation (xcorr) of random sequence is needed to understand these numbers. • The second to last column (for example, cg-5300-1) means that the file was recorded on the router Term5300 on channel 1. • The last argument (for example, 00:03:40.767) is the time when it was recorded. Cross-Correlation and MSR Values Because the PSQM server program needs to align recording and reference waveforms, Callgen plays a short noise-like sequence ahead of every audio file to indicate the beginning. The recorded audio has this sequence close to the beginning (the static you heard at the beginning of each recorded file). Based on that, the PSQM server program can estimate the beginning of real voice content to a 125uS (1/8 ms) accuracy by searching for the peak of the xcorr value. If there is an obvious peak of xcorr detected, you would get a high xcorr and MSR value (the ideal case is xcorr=100%, MSR=infinity). That means the two waveforms are well aligned and, hence, you can have more confidence in the PSQM score. If the values are low, the alignment probably failed and the PSQM score is questionable. For Tl/El, you should have xcorr>30% and MSR>3.0 (POTS has a smaller MSR); otherwise, you might want to ignore that specific score. For example, if you have the following: PSQM= 0.280 Outliers=0.00% (Xcorr=90% MSR:15.1) (5300-21 Ch#001) PSQM= 2.139 Outliers=14.17% (Xcorr=59% MSR:1.1) (5300-24 Ch#002) PSQM= 2.169 Outliers=16.17% (Xcorr=64% MSR:1.3) (5300-24 Ch#002) PSQM= 0.281 Outliers=0.00% (Xcorr=90% MSR:15.1) (5300-21 Ch#001) If the maximum length sequence (MLS) detection cannot find an obvious peak, the PSQM score is problematic, since you cannot trust the offset. The MLS is sent before Callgen plays the reference file. For the above values, MSR=1.1 and 1.3, these two cases happened because the F packet was lost during MLS: original MLS: ABCDEFGHIJK received MLS: ABCDEGHIJK There will be two peaks in this case: one thought it begins with A (it does!); the other thought it begins with a packet before A (wrong!). 6-30 Callgen User Manual Cisco Company Confidential Creating an Audio Test File original: ABCDEFGHIJK peakl thought it received: ABCDEGHIJK. +++++- peak.2 thought it received: .ABCDEGHIJK -+++++ If you get a score worse than the threshold you set (default 3.0), the server must have saved the corresponding audio file, so you can check the quality by listening to it. In the example above, the corresponding file would be: BAD_A UDIC)/cg-5300-2_0001_00:04:14.139.au The audio format is .au 8kHZ, 8-bit, mu-law. Mu-law is the native format for Sun and can be played by many audio player programs. Creating an Audio Test File Sometimes you might want to create your own audio test file to test a different language or a specific type of voice (male, female, or child). Another reason might be if you have unexpected poor results when linking two Callgen routers together. In the first case, you must replace the sound file (for example, reference.au) in your router. This is a classic mu-law audio file with header (default Sun audio format). Pay attention not to take a file that is too long (6 to 8 seconds is the maximum), because the memory available on a router is limited and the longer it is, the longer it takes to process on the server, possibly resulting in bad scores. To create an audio test file, you must create the corresponding reference file in the TFTP/PSQM server location. You cannot use the existing file, because the DSP playing/recording operations on the routers are not transparent. Step 1 Run PSQM on the Callgen routers. You will notice that most of the scores are bad (because we are still using the old reference file on purpose) but identical (same PSQM score and same percentage of outliers). Take one of the .au files from PSQM/BAD_AUDIO. We will use hello.au for this example. Step 2 Find the beginning of the audio data using the command xcorr hello.au. This program also converts the recorded file into 16 bits linear. Step 3 Delete the number of samples given by xcorr (“offset”) at the beginning of the audio file, using an audio edit tool like coolEdit. Save the clipped audio as hello2.au. Step 4 Use the command addAUinfo hello2.au hello3.au to fix the header bug introduced by coolEdit. It does not negatively affect anything if the header is already correct. Step 5 Use the command au2bin hello3.au to get a new reference .bin file ( hello3.bin ) to use on the PSQM server. You must also copy hello3.au to Callgen routers as the new audio file to be played. Viewing Voice Quality Statistics To briefly list voice-quality statistics of all voice channels measured so far, use the command show channel voice-quality. For example: ch-l-vo-o, state: INACTIVE, CSR:98.252%, avg-psqm: 0.000, avg-jtr: -0.0/+0.0, tone-err: 1%, hit: 0, clip: 0, avg-e2e: 0, avg-rtt: 0, echo: na/0/0 avg-pesq:0.000 Cisco Company Confidential Voice Call Type Module 6-31 PESQ ch-2-vo-o, state: INACTIVE, CSR:99.250%, avg-psqm: 0.000, avg-jtr: -0.0/+0.0, tone-err: 0%, hit: 7, clip: 1, avg-e2e: 0, avg-rtt: 0, echo: na/0/0 avg-pesq:0.000 ch-3-vo-o, state: INACTIVE, CSR: 0.000%, avg-psqm: 0.000, avg-jtr: -0.0/+0.0, tone-err: 0%, hit: 0, clip: 0, avg-e2e:88, avg-rtt: 0, echo: na/0/0 avg-pesq:0.000 ch-4-vo-o, state: INACTIVE, CSR: 0.000%, avg-psqm: 0.000, avg-jtr: -0.4/+0.4, tone-err: 0%, hit: 0, clip: 0, avg-e2e: 0, avg-rtt: 0, echo: na/0/0 avg-pesq:0.000 where: CSR is the current call success ratio (confirms/attempts) avg-psqm is the average PSQM score avg-jtr shows the average lead (-) and lag (+) jitters tone-err is the path-confirmation tone error percentage clip/hit is the clip and hit counts avg-e2e is the average end-to-end delay avg-rtt is the average round-trip time echo shows current echo measurement status avg-pesq is the average PESQ score Note In Callgen, you can only configure a channel to do one type of voice-quality measurement at a time. So most numbers, except the configured measurement listed for a channel, are 0, which actually means “not available.” To update PSQM scores, include a PSQM work directory. For example: show channel voice-quality psqm-path tftp://10.0.2.10/spehang/PSQM_FILE/traee.txt Without the path, the listed PSQM scores are either 0 or the previous update. You can use channel filtering commands, such as in-class and in-hold-state. For example: show channel in-class orig_pri_psqm voice-quality PESQ Perceptual Evaluation of Speech Quality (PESQ) is an enhanced measurement for voice quality in telecommunications. PESQ was specifically developed for end-to-end voice quality testing under real network conditions, such as VoIP, POTS, ISDN, and GSM. PESQ was officially approved as the new ITU-T recommendation P.862, and it is meant to be the successor of ITU-T P.861/PSQM. KPN Research of the Netherlands and British Telecommunications (BT) developed PESQ by combining two advanced speech quality measures, PSQM+ and PAMS (see www.pesq.org). Measuring Speech Quality Using PESQ You cannot use the current implementation of voice quality measurement with path confirmation, because they both need to pass audio or tones in-band. Also, you have to set up a PESQ server before 6-32 Callgen User Manual Cisco Company Confidential Measuring Speech Quality Using PESQ starting a channel with a PESQ configuration. Setting up a PESQ server is the same as setting a PSQM server, except you are running a different server program (see Setting Up a PSOM Server (page 6-27) ). Also, you should only configure either PESQ or PSQM but not both in a channel. The way PESQ works is similar to path confirmation: 1 An originate channel with voice quality configured performs a call setup to a terminate channel that also has an identical voice-quality configuration. 2 After answering the call, the terminate channel tests the connection of the terminate router and the PESQ server and then waits for the originate router to do the same test. Once both sides pass the connection test, they are ready to perform voice-quality measurement. 3 The originate channel starts recording voice incoming from the channel, and the terminate channel starts playing a reference audio file to the channel. 4 After recording the whole audio content, the originate channel writes the recorded content to the PESQ server for score calculation and then starts to play the reference audio file. The terminate channel starts recording the incoming voice. That is, they switch the roles of recorder and player. 5 After recording the whole audio content, the terminate channel writes the recorded content to the PESQ server for score calculation. At this point, both sides wait a configurable delay (psqm-inter-delay) to allow the PESQ server to finish the calculation. (Just borrow this command from PSQM for convenience.) 6 Repeats steps 3 to 5 for the duration of the call. If the configured duration of a call is 0, each side functions as a recorder and a player at least once to finish an iteration. To configure a channel for performing PESQ, include the following channel configuration: voice-quality type pesq audio-file file-tag [{sync {3-tone I dtmf I tone frequency duration} I no-sync}] voice-quality pesq-server IP_addr path path-tag protocol where: file-tag specifies the audio file to play. sync specifies the type of tones to synchronize both ends in testing PSQM server-reachability before running PESQ (default is 3-tone). no-sync skips the PESQ server-reachability test. If you are sure that the router has IP connectivity with the PESQ server, specify no-sync to speed up obtaining the first score. However, you need to ping the PESQ server at least once after booting a Callgen router to get the IP route cached. IP_addr is the IP address of the PESQ server. path-tag is the path to accommodate the recorded files on the PESQ server. protocol can be either tcp or udp, depending on the kind of socket needed to connect to the pesq-server. The remote PESQ server must also be using the same protocol. If you want Callgen to connect to the PESQ server at a port other than the default (UDP:7862, TCP:7377), use the following command on the pesq-server where the server is running: voice-quality pesq-port port Note Make sure that the protocol and port numbers are the same on the server and the Callgen configuration. Otherwise, the server will not get requests for score calculation. Cisco Company Confidential Voice Call Type Module 6-33 PESQ In release 4.0T, the audio recording part of the PESQ is redesigned. In this new design, a fixed length of audio is recorded and the parameter max-audio-silence is not used. Callgen does not exactly know when to start recording, so the parameter pesq-pre-record-delay is used to control when to start recording. Ideally, you should start recording when the playing happens. If not, try to record slightly after the playing starts. The reference file contains more than 1 second of silence before the voice starts, so you can miss some initial silence. A default value based on a good value for 5300 ISDN back-to-back topology is defined for backward compatibility with version 3.3T. The default is 1100 milliseconds. voice-quality pesq-pre-record-delay time milliseconds voice-quality pesq-post-play-delay time milliseconds Pesq-post-play-delay delays the originating channel from disconnecting the call. Sometimes the originating channel might disconnect a call before the terminating channel finishes recording. A default value based on a good value for 5300 ISDN back-to-back topology is defined for backward compatibility with version 3.3T. The default is 1000 milliseconds. In the following, the source of the audio file is flash:pesqReference.wav, and the recorded files are written to /tftpboot/spchang/PSQM_FILE on workstation 10.0.2.10: global type voice path 1 tftp://10.0.2.10/spchang/PSQM_FILE audio—file 1 flash:pesqReference.wav The default audio file pesqReference.wav is included in the PSQM/PESQ accessory file PSQM-PESQ-SPARC-xx.tax. You should copy it to the Flash memory of both the originate and terminate routers. Note There is no PESQ server available for Linux machines, and there are no future plans for having one. The way Callgen detects the end of an audio file during recording is to perform voice activity detection (VAD). Once a configurable duration of silence (max-audio-silence) is detected, the channel stops recording immediately. Therefore, it should be set a little longer than the maximum duration of silence in the reference audio file. Otherwise, a channel stops recording before its counterpart finishes playing. However, it should not be set too long just for the sake of a safe VAD, because then the recorded files will all have a long silent trailing and, hence, reduce the efficiency of the PESQ server. The default for max-audio-silence is 1.6 seconds. Note In Callgen 3.3, Callgen receives a comfort noise packet after a very short period of silence, which is about 200 milliseconds. Currently, the recording is stopped if the comfort noise packet is received before max-audio-silence is recorded. Since the PESQ calculation is very resource-demanding for a PESQ server, it is suggested to not start too many concurrent channels performing PESQ measurement. Three channels for a Sun SPARC 10 and less than 10 channels for an Ultra SPARC 5 are recommended. Alternatively, you can start more channels by increasing the psqm-inter-delay so that the recording of each channel occurs less frequently. 6-34 Callgen User Manual Cisco Company Confidential Measuring Speech Quality Using PESQ Here is an example of a PESQ configuration: global type voice path 1 tftp://10.0.2.10/spchang/PSQM_FILE audio-file 1 flash:pesqReference.wav channel 1-3 type voice mode originate voice-quality type pesq audio-file 1 voice-quality pesq-server 10.0.2.10 path 1 voice-quality psqm-inter-delay 8 seconds called-number 4085258414 inter-call-delay 10 seconds start-to-start-delay 10 seconds interface port:0:D channel 4-6 type voice mode terminate voice-quality type pesq audio-file 1 voice-quality pesq-server 10.0.2.10 path voice-quality psqm-inter-delay 8 seconds called-number 4085258414 interface port:l:D The default number of channels doing PESQ is 60. If more channels with PESQ will be running concurrently (for example, 96), use the following configuration: global type voice sys-var psqm-file-pool 96 Note that in this case, at least 96 temporary files have to be pre-touched using the touch_it script ( Setting Up a PESO Server (page 6-36) ). This command is also borrowed from PSQM for the PESQ feature. To view PESQ scores, use a command similar to the following when all channels stop running: show chan pesq-scores server-path tftp://10.0.2.10/spchang/PSQM_FILE/_pesq_itu_resuits.txt The above command shows something like the following: PESQ Score Statistics Channel Average Count ( < 0) (0-1) (1 - 2) (2 - 3) (3 - 4) (4 - 5) 1 4.232 2000002 Note We recommend that you configure the PESQ channel with no duration so that a call will be disconnected after each side does one playing and recording. The longer the call duration, the higher chance that the originating channel and the terminating channel will be out of sync timing wise. Note PRI calls have more consistent PESQ score results than CAS and analog calls. Note If PRI interfaces are used, make sure that the clock source of one controller is configured “internal’' and the other side of the clock source is configured “line.” Use show controller to make sure that there is not a clocking or framing problem before starting the PESQ measurement in Callgen. Cisco Company Confidential Voice Call Type Module 6-35 PESQ Setting Up a PESQ Server Setting up a PESQ server uses the same process as setting up a PSQM server. See Setting Up a PSOM Server (page 6-27) for details. Step 1 Create the directory PSQM_FILE in /tftpboot/<usemame>. Step 2 Download the PSQM/PESQ accessory file PSQM-PESQ-SPARC-xx.tar to /tftpboot/<username>/PSQM_FILE/. Use the command tar xvf PSQM-PESQ -xxxxx-xx.tar to unpack all accessory files. Step 3 Pre-touch the recorded files. The following script creates the files needed by the routers to check whether the TFTP server is reachable as well as touches all possible filenames of recorded files. The username is the name on the PESQ server. touch_it {in.tftpd I tftpd} username router_name [number_of_files\ In the following, the username is spchang on the PESQ server, and a Callgen router named cg-5300-1 is specified for PESQ measurement: touch_it in.tftpd spchang cg-5300-1 96 If you have two Callgen routers, you must do this for each router name. The default number of files touched by the script is 60. If your test has to run more than 60 concurrent channels with PESQ, use the number_of_Jiles parameter. Step 4 Make sure that all the appropriate rights are turned on (use chmod 666 *). Running the Server You can run the PESQ server with the following options: -p—Specifies the transfer protocol of the message socket with Callgen. The options are tcp or udp (the default). -1—Specifies the port on which the PESQ server runs, ranging between 1024 and 10,000. This command allows you to run multiple PESQ servers on the same machine and process requests from different Callgen routers. -r—Specifies the reference audio file that the PESQ function uses for its calculations. The file is in 16-bit linear format. The default is pesqReference.bin. -s—Specifies the sample rate. Either 8000Hz (the default) or 16000Hz. However, Callgen only supports a 8000Hz sample rate -b—Specifies the bad score threshold. The default is 3.0. If the scores are below this threshold, the degraded audio files are saved into the B AD_AUDIO directory. You can relate a PESQ score entry with the saved degraded file via the timestamp. You must specify the reference file when running the server: server_psqm -r pesqReference.bin If the server does not run, it is most likely a problem with the ucb library. Add the following line to your .cshrc file: setenv LD_LIBRARY_PATH $LD_LIBRARY_PATH":"/usr/ucblib 6-36 Callgen User Manual Cisco Company Confidential Reviewing Results If you type pesqServer - r pesqRef erence. bin, the following appears, indicating that the server is ready: PESQ Server Program Version 1.0 Copyright (c) 2002 by Cisco Systems, Inc. To display usage: pesqServer -h Following shows current setting: protocol/port= UDP/7862 reference= pesqReference.bin Wait for requests from Callgen... Reviewing Results After everything is running, you can view the results in the file _pesq_itu_results.txt or on the console. For example: ROUTER#CHANNEL TIMESTAMP REFERENCE SUBJMOS COND SAMPLE_FREQ CRUDE_DELAY (cg-5300-7 ch#0001) 00:42:18.315 SQValue=2.699 0.000 0 (cg-5300-8 ch#0001) SQValue=4.216 00:40:07.307 0.000 0 DEGRADED orlO 9.wav 8000 orlO 9.wav 8000 PESQMOS cg-5300-7#59.wav -1.0840 cg-5300-8#59.wav 1.2960 The output contains the following information: • The fourth column (with the SQValue=prefix) contains the PESQ score. This score is highly correlated with a corresponding MOS score. If you have a good PESQ score, you have a good MOS score in most cases. The perfect PESQ score is 4.5. • The first column (for example, cg-5300-7 ch#0001) shows that the file was recorded on the router cg-5300-7 on channel 1. Creating an Audio Test File Sometimes you might want to create your own audio test file to test a different language or a specific type of voice (male, female, or child). Another reason might be if you have unexpected poor results when linking two Callgen routers together. In the first case, you must replace the sound file (for example, pesq Reference.wav) in your router. This is a classic 8-bit mu-law audio file with header (.wav format). Make sure you do not take a file that is too long (6 to 8 seconds is the maximum), because the memory available on a router is limited and the longer it is, the longer it takes to process on the server, possibly resulting in bad scores. To create an audio test file, you must create the corresponding reference file in the TFTP/PESQ server location. (This file is a 16-bit PCM .wav file.) You cannot use the existing file, because the DSP playing/recording operations on the routers are not transparent. Viewing Voice Quality Statistics To briefly list voice-quality statistics of all voice channels measured so far, use the show channel voice-quality command. For example: ch-l-vo-o, state: INACTIVE, CSR: 0.000%, avg-psqm: 0.000, avg-jtr: -0.0/+0.0, tone-err: 0%, hit: 0, clip: 0, avg-e2e: N/A, avg-rtt: 0, echo: na/0/0 avg-pesq: 4.232 Cisco Company Confidential Voice Call Type Module 6-37 E911 Calls on an Analog Interface ch-3-vo-o, state: INACTIVE, CSR: 0.000%, avg-psqm: 0.000, avg-jtr: -0.0/+0.0, tone-err: 0%, hit: 0, clip: 0, avg-e2e: N/A, avg-rtt: 0, echo: na/0/0 avg-pesq: 0.000 where: CSR is the current call success ratio (confirms/attempts) avg-psqm is the average PSQM score avg-jtr shows the average lead (-) and lag (+) jitters tone-err is the path-confirmation tone error percentage clip/hit is the clip and hit counts avg-e2e is the average end-to-end delay avg-rtt is the average round-trip time echo shows the current echo measurement status avg-pesq is the average PESQ score Note In Callgen, you can only configure a channel to do one type of voice-quality measurement at a time. So most numbers, except the configured measurement listed for a channel, are 0, which actually means “not available.” To update PESQ scores, include a PESQ work directory. For example: show channel voice-quality pesq-path tftp://10.0.2.10/spehang/PSQM_FILE/_pesq_itu_results.txt Without the path, the listed PESQ scores are either 0 or the previous update. E911 Calls on an Analog Interface Callgen tests E911 calls by terminating 911 calls on an FXS-DID card. If the FXS-DID port is configured with CAMA callback (either long or short), the FXS-DID can collect ANI digits after the 911 digits. The collected ANI digits are sent to Callgen for further verification. The FXS-DID voice port should be configured as follows voice-port 6/1/1 signal did cama short timing digit 75 timing inter-digit 65 If the voice port is not configured as a CAMA signal, it acts like a regular FXS-DID port. The following formats of an ANI sent from the CAMA (FXO-M1) interface card can be verified by terminating the Callgen router: • KP-2-ST—None of the ANI digits are dialed out except digit 2. • KP-0-NPA-NXX-XXXX—All 10 digits of the ANI are dialed out preceded by a 0. • KP-0-NXX-XXXX-ST—Seven digits of the ANI are dialed out preceded by a number between 0 and 3. 6-38 Callgen User Manual Cisco Company Confidential Sample Configuration of a CAMA Port Sample Configuration of a CAMA Port The CAMA port should be configured to specify the type of ANI that needs to be dialed out. For example: voice-port 6/1/1 signal cama KP-O-NXX-XXXX-ST Sample Configuration on a Terminating Callgen Router For signaling type KP-2-ST, verify-ani must be configured under the channel configuration. For signaling type KP-O-NPA-NXX-NXXX, the channel should contain all 10 digits of the ANI verify-ani CLI. For example: Channel 1 type voice mode terminate Called-number 911 Verify-ani 4088538540 path-confirmation type ping string 123 interface port:l/0/0 For signaling type KP-O-NXX-XXXX-ST, since we do not know the first incoming digit before collecting ANI digits, we use a wildcard for the ANI number that needs to be verified. For example: Channel 1 type voice mode terminate Called-number 911 Verify-ani ,8538540 path-confirmation type ping string 123 interface port:l/0/0 You can only configure verify-ani for the terminate channels. If verify-ani is configured, the following counters are shown as part of show channel statistics: ani-match: 1 ani-mismatch: 0 callback: 0 call confirms: 1 callback confirm: 0 Only path-confirmation type ping works with E911 calls. If verify-ani is configured along with path-confirmation, the call confirm counter is incremented but not the confirms counter. Based on the ANI information received, either ani-match or ani-mismatch is incremented, which can be seen using show channel channel_number. If the CAMA signal is not configured, the ANI digits are not collected. If path-confirmation is configured and successfully executed, the regular confirms counter is incremented like any other call. Skinny IP Phone Simulation Callgen has been successfully used to test telephony interfaces as well as H.323 and SIP VoIP features of Cisco products. Callgen can directly leverage most signaling protocols supported on IOS voice-enabled routers, such as analog, CAS, R2, BRI/PRI, VoFR, and VoAAL5. However, a major missing link is the Cisco-proprietary Skinny protocol, which is used between the Cisco Call Manager and Cisco IP phones. Since the Skinny protocol is not intended to be used between a gateway and a Call Manager (MGCP is used on VG200, Cat6K, and 2600/3600 instead), it has never been implemented on IOS routers. Vespa is the first project to build Skinny into IOS to enable Call Manager fallback caused by WAN outage. It also provides a soft-version, keyswitch system of IP phones. Because the IP phone simulation feature depends on Vespa’s code, it was developed on a separate branch based on the Cisco Company Confidential Voice Call Type Module 6-39 Skinny IP Phone Simulation Vespa project branch. The images containing the IP phone simulation feature are released as special images that are Callgen 3.0-based. With the Callgen 4.0T release, the IP phone simulation feature is merged back to the main Callgen branch. Simulating Two IP Phones The following shows how to simulate two IP phones. Step 1 Configure the command ephone-emulation in IOS configuration mode, which starts the Skinny client process to take care of Skinny station messages to Call Managers. Step 2 In Callgen mode, enter the following configuration: global type voice sys-var max-ip-phones 2 channel 1 type voice mode originate duration 3 minutes inter-call-delay 3 seconds calling-number 1001 called-number 3001 interface port:51/0/l ip-phone model telecaster ip-phone codec g711ulaw ip-phone source-ip-address 10.0.2.18 ip-phone mac-address 00B0.6409.BDE5 ip-phone call-manager-ip 10.0.2.4 port 2000 The max-ip-phones command creates soft interface ports numbered from 51/0/1 to 51/0/n, representing the jacks available for the number of simulated IP phones, max-ip-phones must always be configured before configuring the interfaces of the channels. Some IP phone-specific configurations (shown with ip-phone prefix) require that the interface port be specified first. In this example, the IP address and MAC address of the Ethernet interface installed on the router are given in the channel configuration. That is not a requirement, since it would limit the total number of simulated IP phones to the number Ethernet interfaces a router could have. (To simulate multiple IP phones using a single physical interface, see Simulating Multiple IP Phones (page 6-42) .) Step 3 Enter the show channel command. It should show that the channel state is UNREG, which means the channel has not yet registered with a Call Manager. Step 4 Enter channel 1 cm-register to change the channel state to INACTIVE. After this point, channel 1 functions as if it were an analog phone with most Callgen functionalities retained. However, real DSP functions, such as tone generation, are not possible, since no DSP is involved or required. For example, in the above configuration, the device configuration with MAC address 00B0.6409.BDE5 and directory number 1001 is on Call Manager 10.0.2.4, and a real IP phone is registered to the same Call Manager with directory number 3001. The Callgen command start 1 total-call 1 will ring the real phone. By doing so, we are actually calling a real IP phone from a simulated IP phone, so both the real IP phone and the Call Manager are being tested. To test a Call Manager solely, calls must be terminated by a simulated IP phone. The following configuration is of a terminate channel functioning as an answering-side IP phone: channel 2 type voice mode terminate called-number 3001 interface port:51/0/2 6-40 Callgen User Manual Cisco Company Confidential Simulating Two IP Phones ip-phone ip-phone ip-phone ip-phone ip-phone model telecaster codec g711ulaw source-ip-address 10.0.2.19 mac-address 00B0.6409.CCC7 call-manager-ip 10.0.2.4 port 2000 Note that the source IP address and MAC address are different than those of channel 1. Assuming that a device configuration with MAC 00B0.6409.CCC7 and directory number 3001 has been given on Call Manager 10.0.2.4, the command channel 2 cm-register registers the simulated IP phone to the Call Manager and changes the Callgen channel state from UNREG to INACTIVE. Then, issuing the command start 2 changes the state of channel 2 to IDLE, making it ready to answer incoming calls. If you enter the command start 1, you should see channel 1 making calls and channel 2 receiving calls over and over. The stop command stops the current call immediately. The command channel 1-2 cm-unregister unregisters both channels from the Call Manager. You could also verify the signaling path along the whole call duration by configuring path-confirmation type ping and then checking the confirms statistic after a call stops. Since simulated IP phones have no RTP traffic, there are only keepalive messages after call setup. To enable RTP packet generation by playing out an audio file repeatedly, use the following command and add the following script in the channel configuration. The audio file reference.au must be copied over to the router’s Flash memory first. global type voice audio-file 1 flashireference.au script { pi 1 Is } You can also configure path-confirmation type 3-tone play audio-file-tag to verify the bearer path when CODEC type g711ulaw is configured. See Path Confirmation (page 6-8) for more details. The CLI for configuring CODEC types is: ip-phone codec {g711ulaw I g7231 bitrate {5.3kbps I 6.4kbps} I g729r8} Note You can only configure up to two phones (one originate and one terminate channel) per IP phone port. The two phones with the same IP phone port must have the same IP phone-related configuration (parameters with the ip-phone prefix). You can configure two phones sharing the same port when either phone is unregistered. Note Callgen allows you to configure different CODEC types for signaling purposes. However, Callgen is only capable of generating g711ulaw RTP packets. Note With CallManager 3.1, the integer value of a phone type telecaster was changed from 6 to 7. For Callgen image to work with both versions of CallManager, we have added a new phone model option. If you test the older version of CallManager, configure ip-phone model telecaster for a 7960 phone. If you test the newer version of CallManager, configure ip-phone model telecastr-mgr for a 7960 phone. You might need to change your existing scripts if you’re testing different versions of CallManager. Cisco Company Confidential Voice Call Type Module 6-41 Skinny IP Phone Simulation Note Make sure that ip routing is configured on the Callgen router. At one point, this IOS configuration was configured under the Ethernet interface, but it can also be configured under global configuration mode in some versions of IOS. By default, ip routing is enabled. Simulating Multiple IP Phones To simulate multiple IP phones, first configure ephone-emulation in IOS configuration mode. Then, configure a loopback interface with multiple IP addresses for all the source IP addresses to be used for simulated IP phones. For example: interface LoopbacklO ip address 10.0.10.1 255.255.255.255 ip address 10.0.10.2 255.255.255.255 secondary ip address 10.0.10.99 255.255.255.255 secondary ip address 10.0.10.100 255.255.255.255 secondary The following example configures 100 IP phones. The simulated IP phones are in the 10.0.10.0 subnet, and the Call Manager is in the 10.0.2.0 subnet, so the appropriate ip route configuration has to be done on the default gateway of the Call Manager to make 10.0.10.0 reachable. global type voice sys-var max-ip-phones 100 channel 1 type voice mode originate calling-number 8001 called-number 9001 interface port:51/0/l ip-phone model telecaster ip-phone codec g711ulaw ip-phone source-ip-address 10.0.10.1 ip-phone mac-address 05C0.CA11.0001 ip-phone call-manager-ip 10.0.2.4 port 2000 channel 2 type voice mode originate calling-number 8002 called-number 9002 interface port:51/0/2 ip-phone model telecaster ip-phone codec g711ulaw ip-phone source-ip-address 10.0.10.2 ip-phone mac-address 05C0.CA11.0002 ip-phone call-manager-ip 10.0.2.4 port 2000 channel 50 type voice mode originate calling-number 8050 called-number 9050 interface port:51/0/50 ip-phone model telecaster ip-phone codec g711ulaw ip-phone source-ip-address 10.0.10.50 ip-phone mac-address 05C0.CA11.0032 ip-phone call-manager-ip 10.0.2.4 port 2000 channel 51 type voice mode terminate called-number 9001 interface port:51/0/51 ip-phone model telecaster ip-phone codec g711ulaw ip-phone source-ip-address 10.0.10.51 6-42 Callgen User Manual Cisco Company Confidential Configuring IP Phone Failover with Multiple Cali Managers ip-phone mac-address 05C0.CA11.0033 ip-phone call-manager-ip 10.0.2.4 port 2000 channel 100 type voice mode terminate called-number 9050 interface port:51/0/100 ip-phone model telecaster ip-phone codec g711ulaw ip-phone source-ip-address 10.0.10.100 ip-phone mac-address 05C0.CA11.0064 ip-phone call-manager-ip 10.0.2.4 port 2000 In this case, MAC addresses are virtual rather than a physical ID. They are defined just to be used as the name of the IP phones. The actual MAC used to send out an Ethernet packet containing a Skinny message depends on the interface selected for the transmission. Before making a call, configure phone devices on Call Manager 10.0.2.4 with the following pairs (MAC address, directory number): (05C0.CA11.0001, 8001) (05C0.CA11.0002, 8002) (05C0.CA11.0032, 8050) (05C0.CA11.0033, 9001) (05C0.CA11.0064, 9050) With this configuration, enter channel 1 - 100 cm-register and check whether all the channels go into INACTIVE state successfully. If yes, the command start total-calls 50 will simulate 50 IP phones calling another 50 IP phones simultaneously. Configuring IP Phone Failover with Multiple Call Managers To test the Call Manager failover feature, you can configure an IP phone with multiple Call Managers. When the primary Call Manager fails, the IP phone tries to register to the back-up Call Managers. You can configure a maximum of two back-up Call Managers per IP phone. global type voice sys-var max-ip-phones 2 channel 1 type voice mode originate calling-number 8050 called-number 9050 interface port:51/0/l ip-phone model telecaster ip-phone codec g711ulaw ip-phone source-ip-address 10.0.10.100 ip-phone mac-address 05C0.CA11.0064 ip-phone call-manager-ip 10.0.2.4 port 2000 ip-phone call-manager-ip 10.0.2.5 port 2000 backupl ip-phone call-manager-ip 10.0.2.5 port 2000 backup2 Configuring an IP Keyswitch The following IP keyswitch configuration replaces the Call Manager used in the example in the section Simulating Two IP Phones (page 6-40) . keyswitch ip source-address 10.0.2.4 port 2000 Cisco Company Confidential Voice Call Type Module 6-43 SIP IP Phone Emulation ephone-dn 1 number 1001 i ephone-dn 2 number 3001 i ephone 1 mac-address 00B0.6409.BDE5 button 1:1 ephone 2 mac-address 00B0.6409.CCC7 button 1:2 Note The IOS feature IP Key switch has been renamed to Telephony Service. To get into telephony service configuration mode, type telephony service at the IOS global configuration mode. For more details, refer to the following URL: http://www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/ipkey2.htm Configuring Cisco Call Manager Note To register Callgen-simulated IP phones with the Cisco Call Manager (CCM), the auto-registration option of CCM needs to be turned off, so you need to manually configure the phone devices in CCM. The MAC address and DN of configured devices in CCM must match the MAC address and the DN (called-number) configured in Callgen. Note If you need to configure many phones in CCM, you can use a utility called Bulk Administration Tool (BAT). You can search on the Cisco CCO page for more information, using the keyword “BAT.” SIP IP Phone Emulation Since Callgen v4.1T, Callgen supports SIP IP phone emulation based on the IOS SRST code. Callgen can only register a called number. The major difference between SIP IP phone emulation and a SIP gateway call is that the SIP IP phone emulation requires a registration to a proxy server or a registrar server. Registration is not required for SIP gateway calls. If your SIP testing does not require registering a phone, you should configure the SIP gateway calls. For more details on generating SIP gateway calls, see Making Calls Using SIP (page 6-16) . Configuring SIP Phones sip-endpt emulation Enables the channel to do SIP phone registration. sip-endpt server-ip ip-address [port n] Configures the SIP proxy server (or IOS SIP SRST) IP and port information. If port is not specified, the default is 5060. 6-44 Callgen User Manual Cisco Company Confidential Configuring Cisco SIP SRST Registrar sip-endpt source-ip-address ip-address Configures the source IP address of the emulated IP phone. Make sure that the Callgen router and the SIP server know how to reach each other. Otherwise, add any IP routing entries as necessary. sip-endpt protocol {tcp I udp} Configures the protocol used to set up a SIP call. If unconfigured, the default protocol is UDP. Sample Callgen router configuration: Note SIP phone registration is done without username/password authentication. !IOS configuration dial-peer voice 1 voip destination-pattern 6333 session protocol sipv2 session target ipv4:128.21.1.98 !Callgen configuration channel 1 type voice mode originate calling-number 6333 called-number 6222 interface voip:l sip-endpt emulation sip-endpt server-ip 128.21.1.98 sip-endpt source-ip-address 128.21.1.43 Configuring Cisco SIP SRST Registrar Sample IOS configuration: voice service voip sip registrar server expires max 600 min 60 voice register pool 1 id network 128.21.1.0 mask 255.255.255.0 For details, see the IOS documentation on the CCO page: http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps5012/products_feature_guide09186a 0080181116.html#24877 Note Image c3745-ipvoice-mz. 123-7.9.T has been used in our testbed. c3660-js-mz does not work. Registering and Unregistering SIP Phones channel nl [- n2] sip-register Registers a channel or a group of channels to the SIP proxy server/registrar server. If the registration is successful, the Callgen channel state changes from UNREG to INACTIVE. channel nl [- n2] sip-unregister Cisco Company Confidential Voice Call Type Module 6-45 SIP IP Phone Emulation Unregisters a channel or a group of channels from the SIP proxy server/registrar server. If the unregistration is successful, the Callgen channel state changes from INACTIVE to UNREG. A channel should be stopped first before attempting to unregister the channel from the server. Example of SIP to SIP Call with 3-tone Path Confirmation IOS configuration on the Callgen router dial-peer voice 1 voip session protocol sipv2 session target ipv4:128.21.1.60 incoming called-number 1345 dtmf-relay sip-notify codec g711ulaw i dial-peer voice 2 voip application callgen_voice_ctm session protocol sipv2 session target ipv4:128.21.1.60 incoming called-number 2678 dtmf-relay sip-notify codec g711ulaw IOS configuration of the SIP SRST Registrar router voice service voip sip registrar server expires max 600 min 60 voice class codec 1 codec preference 1 g711ulaw voice register pool 1 id ip 128.21.1.10 mask 0.0.0.0 max registrations 76 voice-class codec 1 voice register pool 2 id ip 128.21.1.51 mask 0.0.0.0 voice-class codec 1 interface FastEthernet0/0 ip address 128.21.1.60 255.255.255.0 no ip route-cache speed auto half-duplex Callgen configuration g3660-l(cgch_3_vo_o)#sh co global type voice audio-file 1 flash:3tone_s.au channel 1 type voice mode originate duration 30 seconds calling-number 1345 called-number 2678 path-confirmation type 3-tone-slope play 1 6-46 Callgen User Manual Cisco Company Confidential Notes For Generating SIP IP Phone Emulation Load Test interface voip:l sip-endpt emulation sip-endpt server-ip 128.21.1.60 sip-endpt source-ip-address 128.21.1.51 channel 2 type voice mode terminate called-number 1345 path-confirmation type 3-tone-slope play 1 interface voip:l sip-endpt emulation sip-endpt server-ip 128.21.1.60 sip-endpt source-ip-address 128.21.1.51 channel 3 type voice mode originate duration 20 sec calling-number 2678 called-number 1345 path-confirmation type 3-tone-slope play 1 interface voip:2 sip-endpt emulation sip-endpt server-ip 128.21.1.60 sip-endpt source-ip-address 128.21.1.51 channel 4 type voice mode terminate called-number 2678 path-confirmation type 3-tone-slope play 1 interface voip:2 sip-endpt emulation sip-endpt server-ip 128.21.1.60 sip-endpt source-ip-address 128.21.1.51 Note If you want to do path-confirmatation type ping, you need to configure “dtmf-relay sip-notify” on the VoIP dial peers of both originate and terminate channels. Notes For Generating SIP IP Phone Emulation Load Test Since the VoIP interface does not use DSP resource, it depends on CPU resource to do both playing out a tone file and detecting the incoming tone. Different platforms have different limits on the max number of channels/calls that can be bearer at the same time. This limitation is from the IVR Playout limitation defined in IOS code. The following lists the theoretical IVR limits on the corresponding Callgen platforms. The same thing applies to any other kind of VoIP interface. c3640 — 30 (sys/machine/cisco_c3600.h) C3660 — 180 (sys/machine/cisco_c3600.h) C3745 — 120 (sys/src-7k-c3745/platform_c3745.c) C7200 — 600 (sys/machine/cisco_c7100.h) (Note that c7200 has two different versions, the later more powerful CPU) version has C5400 — 480 (sys/src-7k-as5400/platform_as5400.c) (Note, there are also two version of 5400, the as5400, as5400HPX) Note The built-in registration expiration time for the SIP IP phone emulation feature is 3600 seconds. Path-confirmation might fail if a channel has to re-register in the middle of an active call. Cisco Company Confidential Voice Call Type Module 6-47 Interface Specifications Interface Specifications For voice channels, the interface is required (see Associating a Channel with an Interface (page 4-3) ). Use the show interface command to see a list of valid choices and desired formats. The Callgen voice CTM is based on Symphony and is capable of placing calls on POTS, PRI, VoIP, and VoFR interfaces. Note For VoXX calls, a dial peer must be specified through the interface command. The dial peer must have already been created as part of the router’s running configuration. The valid formats for interface specifications for the call types are: Call Type Format Examples POTS port:slotlsub-unitlport interface port:0/0/0, interface port:0/l/0 PRI/CAS port :slot:signalingchannel where: slot = T1 controller slot # signaling channel = D for PRI, dsO-group number for CAS interface port: 0:1, interface port: 1:D POTS/PR1/CAS pots This command lets a terminating channel answer a call from any interface. interface pots VoIP voip '.dial-peer tag voip: 100 VoFR \otr:diaI-peer tag vofr:99 Call Disconnect Codes The following are the cause codes you are most likely to see when you use the show channel num command. The output provides information on why the last call was disconnected. Any disconnect cause other than NORM (16) or CALL_CLEARED (86) that occurs while the channel is in the HOLD state is considered abnormal. Result Code Identifier Explanation 1 UANUM Unassigned number. No terminate channels have been configured for the called number. 16 NORM Normal call completion. 17 BUSY The terminate channel assigned to handle the call is busy handling another call. 21 REJECT Call rejected. 47 NO_RESOURCE Terminate channel is misconfigured or has not been started. 63 NOSV No service available. VoIP sockets are unable to handle call load. 86 CALL_CLEARED Call aborted by user. Explanations for all call disconnect codes (as in 12.3T) can be found at http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_command_reference_chapter 09186a008017cfa4.html 6-48 Callgen User Manual Cisco Company Confidential CHAPTER 7 Data Call Type Module The data CTM works in combination with IOS’s Dial on Demand Routing (DDR) to provide modem, ISDN, VPDN Dialout, ProxyPPP, or other PPP/IP-based session control. Typical Test Scenarios Figure 7-1 depicts typical test scenarios involving the data CTM. In these scenarios, the Unit Under Test (UUT) could be anything from a single Network Access Server (NAS) to a complete VPDN/L2TP solution comprised of many components. Figure 7-1 Typical Data CTM Test Scenarios Using the Data CTM The data CTM requires separate originate and terminate Callgen routers. Like other Callgen modules, the terminate side must be started before the originate side. To initiate a call, the originate channel sends a UDP packet to the terminate channel via a specific dialer interface. That packet stimulates a DDR session, establishing IP connectivity between the Callgen originate and terminate channels. Figure 7-2 depicts how the originate endpoint can be used to drive various DDR interfaces. Figure 7-2 Leveraging DDR interfaces Callgen Data CTM: Leveraging IOS' DDR Callaen DDR Interface Media Data CTM - ► Async -► Modem Originate -► Dialer -► ISDN Channel -► Dialer+vAccess -► L2F/L2TP Cisco Company Confidential Data Call Type Module 7-1 Data CTM Configuration Parameters To keep the initial packet from getting discarded while the link is active, the dialer interface must be configured with a hold-queue size of 1. To get more direct control over the call and the ability to get the link to drop when we want, the dialer interface is given a very brief idle timeout. We also specify a fast enable-timeout to re-enable the interface quickly. Data CTM Configuration Parameters Specifying the Source Address source address address Specifies the source address for the channel. On the originate channel, this is the address of the DDR interface. On the terminate end, loopback interfaces with secondary addresses work well enough. Example: clash-5300(callgen) # channel 101 source address 171.18.30.44 Specifying a Source Port source port number Specifies a different UDP port than the default (12321) for this channel. Note that the originating channel requires a destination port with the same port number. You should not need to change the source or destination port numbers unless some new functionality comes out that uses this port number. The data CTM gobbles all packets sent to the specified UDP port and ignores all others. Only one source port number should be used on a Callgen router. To simplify the configuration of this parameter, use a Callgen class for assigning the port number to channels. Example: clash-5300(callgen) # channel 101 source port 12345 Specifying a Destination Address destination address address Specifies the target address for the originate channel. This command applies to originate channels only. The terminate channel should have a source address with the same ip-address. Example: clash-5300(callgen) # channel 101 destination address 171.18.30.44 Specifying a Destination Port destination port number Specifies a different UDP port than the default (12321) for the terminating channel. The terminating channel requires a source port with the same port number. You do not need to change the source or destination port numbers unless some new functionality uses this port number. 7-2 Callgen User Manual Cisco Company Confidential Specifying the DDR Interface The data CTM gobbles all packets sent to the specified UDP port and ignores all others. Example: clash-5300(callgen)# channel 101 destination port 12345 Specifying the DDR Interface dialer-interface name Identifies the DDR interface on which to send packets out. This parameter is optional and is for originate channels only. If not specified, be sure to install a static route that directs the destination packet out the proper interface. Example: clash-5300(callgen)# channel 101 dialer-interface AsynclOl Defining the Packet Rate frame rate n Defines the rate at which data packets are generated by the channel. To generate no packets, use a rate of 0. The default rate for an originate channel is 20 per minute (1 packet every 3 seconds), and for a terminate channel it is 0. Example: clash-5300(callgen)# channel 101 frame rate 10 per second Defining Packet Frame Size frame size bytes Defines the IP packet frame size (in bytes) for data packets. The size does not include the media encapsulation, which would be an additional 14 bytes per packet for Ethernet. The default frame size is 100 bytes. Example: clash-5300(callgen)# channel 101 frame size 50 Defining the Data Pattern frame pattern Defines the data pattern to use with data packets sent over the channel. The default pattern is zeros. Example: clash-5300(callgen)# channel 101 frame pattern random Specifying Setup Timeout setup-timeout seconds Defines the maximum amount of time the channel waits for a call setup to complete. This parameter applies to originate channels only. The specified value should be longer than the Cisco Company Confidential Data Call Type Module 7-3 Data CTM Configuration Parameters maximum amount of time it will take for the DDR interface to establish the PPP session. The default is 45 seconds. Experimentation shows that modem calls typically complete in less than 22 seconds, and ISDN calls take less than 2 seconds. Example: clash-5300(callgen)# channel 101 setup-timeout 60 Specifying Teardown Timeout teardown-timeout seconds When an active call is terminated, either implicitly when the duration has expired or explicitly with the stop command, the Callgen channel sends a disconnect packets to the other endpoint. If the originating endpoint does not receive a disconnect ack packet from the terminating endpoint, the originating endpoint resends the disconnect packet every second. If the originating endpoint does not receive the disconnect ack packet before the terminate timeout expires, a failure is logged. The default is 5 seconds. Example: clash-5300(callgen)# channel 101 teardown-timeout 15 Specifying Intercall Delay inter-call-delay seconds seconds The inter-call-delay value should be greater than the sum of dialer idle-timeout and dialer enable timeout, which are configured under async interfaces. It is good practice to configure an appropriate inter-call-delay so that Callgen does not rush to make a modem call before the IOS dialer is ready for another call, in which case, setup fail might occur. See Specifying the Time Between Calls (page 4-5) for more detaisl on inter-call-delay. Example: clash-5300(callgen)# channel 101 inter-call-delay 60 seconds Specifying Automatic Increment of Source/Destination IP Addresses You can individually assign each data channel a source and destination address. You can also automatically assign the addresses to the channels using the following commands. These commands can be used only on a class basis. source-ip-base-mask address mask Specifies the source base IP address for the data channels and the subnet mask. The address and mask must be in inet dot notation. source-increment-step step Specifies the increment step of the source IP addresses for the data channels. This provides more control over assigning the subsequent IP addresses. Step varies from 1 to 255. The default is 1. dest-ip-base-mask address mask Specifies the destination base IP address for the channels and the subnet mask. The address and mask must be in inet dot notation. This command applies to originate channels only. dest-increment-step step 7-4 Callgen User Manual Cisco Company Confidential Configuring Path Confirmation for Modem Calls Specifies the increment step of the destination IP addresses for the data channels. This provides more control over assigning the subsequent IP addresses. Step varies from 1 to 255. The default is 1. This command applies to originate channels only. For example: cg-5300-3(callgen)#class oAsync type data mode originate cg-5300-3(cgcc_oAsync_da_o)#source-ip-base-mask 111.1.0.1 255.255.255.0 cg-5300-3(cgcc_oAsync_da_o)#dest-ip-base-mask 113.1.0.1 255.255.255.0 cg-5300-3(cgcc_oAsync_da_o)#source-increment-step 1 cg-5300-3(cgcc_oAsync_da_o)#dest-increment-step 1 cg-5300-3(cgcc_oAsync_da_o)#show conf class oAsync type data mode originate source-ip-base-mask 111.1.0.1 255.255.255.0 source-increment-step 1 dest-ip-base-mask 113.1.0.1 255.255.255.0 dest-increment-step 1 cg-5300-3(callgen)#chan 1-5 class oAsync cg-5300-3(cgch_l-5_da_o)#show conf class oAsync type data mode originate source-ip-base-mask 111.1.0.1 255.255.255.0 source-increment-step 1 dest-ip-base-mask 113.1.0.1 255.255.255.0 dest-increment-step 1 channel 1 class oAsync source address 111.1.0.1 destination address 113.1.0.1 channel 2 class oAsync source address 111.1.0.2 destination address 113.1.0.2 channel 3 class oAsync source address 111.1.0.3 destination address 113.1.0.3 channel 4 class oAsync source address 111.1.0.4 destination address 113.1.0.4 channel 5 class oAsync source address 111.1.0.5 destination address 113.1.0.5 Configuring Path Confirmation for Modem Calls Similar to voice calls, path confirmation can be performed for data calls. Proprietary UDP traffic is sent across the connected originate and terminate channels from time to time, until the call duration expires. The path confirmation CLI for modem channels is very similar to voice channels: path-confirmation type ping This command is applicable for both originate and terminate channels. Once the path confirmation is configured, confirmation statistics are shown as part of the show channel statistics. Cisco Company Confidential Data Call Type Module 7-5 Data CTM Configuration Parameters When path-confirmation type ping is defined on the originating channel, the channel’s frame rate, frame size, and frame pattern configuration apply toward the ping packets. Setting the frame rate to non-zero, pauses the originating channel for the user-specified duration in between each packet. If the frame rate is set to zero, the channel sends the next ping packet as soon as it receives an acknowledgement for the last ping. On the terminating channel, the channel’s frame size and frame pattern configuration applies toward the ping-ack packets. Its frame rate configuration is ignored, since it does not apply toward path confirmation traffic. Performing FTP Over Async/Dialer Cards Until now there was no simple solution to generate modem/ISDN calls and perform FTP functionality over async/dialer interfaces. This solution is based on LNE FTPSE. In addition to the regular configuration to generate modem calls, you must configure certain FTP commands. global type data [mode {originate I terminate}] ftp {client I server} This is a global configuration mode. It is advised that you configure the FTP server on the same router as the terminate channel because it is necessary for the server to be started before the FTP client starts the process, since the terminate channel is the first to know that end-to-end connectivity is established. The following commands are channel configurations: ftp username username Specifies the username required to authenticate the FTP session, ftp password password Specifies the password required to authenticate the FTP session, ftp command {get I put} Specifies the job type initiated by the client side. ftp filename filename Specifies the filename that is either sent to or from the FTP server, ftp Rlesize file_size Specifies the size of the file sent and stored on the FTP server. Required only when the command is put. ftp xfer-size xfer_size Required to be configured on the server side when the client is going to initiate the get command. Generating TCP Traffic By default, the data CTM generates UDP traffic to the terminate channel. To generate TCP traffic, you must enable it with the command tcp-gen enable command. All TCP-related traffic options are assigned using the tcp-gen parameter. The following options are available. tcp-gen frame size #bytes Specifies the TCP message frame size in bytes to be sent from the endpoint (either originate channel or terminate channel). Valid size ranges are from 1 to 65535. The default is 100 bytes. 7-6 Callgen User Manual Cisco Company Confidential Generating TCP Traffic tcp-gen frame count # Specifies the total count of TCP messages to send before the TCP connection can tear down. Valid number ranges are from 1 to 4294967295. The default is 0, which specifies that TCP messages are sent infinitely until the TCP connection tear down. For originate channels only. tcp-gen frame rate #frames [per {second I minute I hour}] Specifies the number of TCP messages to send within the specified time. The maximum rate is 65535 per second. The default is 10 frames per second. For originate channels only. tcp-gen keepalive {on I off} Enables and disables TCP keepalive mode. The default is off. tcp-gen echo {on I off} Enables and disables the terminate channel to echo the TCP message back to the originate channel, or enables and disables the originate channel to expect the terminate channel to echo messages to it. The default is on. tcp-gen nagle {on I off} Enables and disables the Nagle algorithm in the TCP connection. The default is on. tcp-gen tos hex_number Specifies the Type Of Service field in the TCP frame header. The default is on. tcp-gen verify {on I off} Enables and disables the verification of received TCP messages. Note that both originate and terminate channel always check for a sequence number and a magic number in the message header, even if verify is off. The default is on. tcp-gen window #bytes Specifies the endpoint’s (originate or terminate channel) TCP window size in bytes. Valid size ranges are from 1 to 65535. The default is 4128 bytes. tcp-gen connect port dest_port Specifies the destination port number to which to connect. The destination IP address information is obtained from the channel’s source address. You must configure source address before configuring this parameter; otherwise, an error message results. For originate channels only. tcp-gen connect rate #connect [per {second I minute I hour}] Specifies the number of TCP connections to make in the specified time. The maximum rate is 65535 connection per second, but actually you can only make two TCP connections per second because of the nature of TCP state sequence. For originate channels only. tcp-gen connect count #connect Specifies the number of TCP connections to make before stopping TCP traffic generation. Valid number ranges are from 1 to 65535. The default is 0, which specifies that there is only one TCP connection for the life of originate channel. For originate channels only. tcp-gen connect start-time-delay delay Specifies the delay before tcp-gen starts making a TCP connection to its destination channel. Valid range is from 1 to 65535. The default is 0, no delay. The delay time is measured from the time when the originate data channel receives the SETUP_ACK to the time when the data channel issues the TCP connect request. For originate channels only. tcp-gen listen port port_number Cisco Company Confidential Data Call Type Module 7-7 Modem Configuration Example Specifies the listener’s port number information. For terminate channels only. Modem Configuration Example The following is an example of an originate Callgen configuration for a modem: config t username Asyncl password cisco interface Serial2:15 no ip address encapsulation ppp dialer-group 1 ! for 12.0 (or later) Network config only: isdn net i isdn incoming-voice modem no cdp enable no ip mroute-cache no logging event link-status no fair-queue interface Asyncl ip address 111.1.0.1 255.255.255.0 encapsulation ppp dialer in-band dialer enable-timeout 6 dialer idle-timeout 2 dialer string 5551111 dialer hold-queue 1 dialer-group 1 ppp chap hostname asyncl async mode dedicated no peer default ip address no fair-queue no cdp enable no logging event link-status ppp authentication chap end callgen class oAsync type data duration 15 inter-call-delay 10 frame rate 90 per min frame size 256 channel 101 class oAsync source address 111.1.0.1 destination address 113.1.0.1 dialer-interface Async 1 The following is an example of a terminate Callgen configuration for a modem: config t username asyncl password cisco interface Group-Asyncl ip unnumbered Fastethernet 0 encapsulation ppp async mode dedicated no logging event link-status no peer default ip address no fair-queue no cdp enable ppp authentication chap group-range 1 60 7-8 Callgen User Manual Cisco Company Confidential ISDN Configuration Example interface Loopback 3 no logging event link-status ip address 113.1.0.1 255.255.255.0 end callgen class tAsync type data mode terminate channel 101 class tAsync source address 113.1.0.1 ISDN Configuration Example The following is an example of an originate Callgen configuration for ISDN: config t username isdnl password cisco interface Serial0:15 no ip address encapsulation ppp isdn net isdn incoming-voice modem dialer pool-member 1 max-link 1 no cdp enable no ip mroute-cache no logging event link-status no fair-queue interface Dialerl ip address 110.1.0.1 255.255.255.0 encapsulation ppp dialer remote-name dl dialer idle-timeout 2 dialer enable-timeout 2 dialer string 5551101 class ISP1 dialer pool 1 dialer hold-queue 1 dialer-group 1 ppp chap hostname isdnl no fair-queue no cdp enable no logging event link-status ppp authentication chap dialer-list 1 protocol ip permit end callgen class olsdn type data duration 15 inter-call-delay 3 frame rate 10 per sec setup-timeout 5 teardown-timeout 5 frame size 256 channel 1 class olsdn source address 110.1.0.1 destination address 112.1.0.1 dialer-interface Dialerl To prevent IOS from trying to bundle all the links together on the terminate side of the PPP connection, it is important that each dialer authenticate using a unique name. Use the command ppp chap hostname for this purpose. Cisco Company Confidential Data Call Type Module 7-9 Creating a Data CTM IOS Configuration The following is an example of a terminate Callgen configuration for ISDN: config t username isdnl password cisco interface Serial0:15 ip unnumbered Fastethernet 0 encapsulation ppp isdn incoming-voice modem dialer-group 1 ppp authentication chap no peer default ip address no fair-queue no ip mroute-cache no cdp enable no logging event link-status interface Loopback 1 no logging event link-status ip address 112.1.0.1 255.255.255.0 end callgen class tlsdn type data mode terminate channel 1 class tlsdn source address 112.1.0.1 Creating a Data CTM IOS Configuration The following Callgen commands configure IOS for ISDN data and modem calls. This becomes the default IOS configuration. Depending on the testbed, you might need to change the IOS configuration. Specifying the Host [no] host-access hostname Specifies the host that brings up the PPP session. This command configures IOS as follows: “username hostname password 0 cisco”. This is required for the PPP CHAP authentication, which tries to match passwords on both hosts that participate in the PPP session. Using this command, you configure the host of the Callgen originate side and the host that participates in the PPP session. You can only configure two hostnames with the host-access command. This is a global-mode command applicable to both originate and terminate sides. In this example, the cg-5300-3 is trying to bring up a PPP session with cg-5300-4: cg-5300-3(callgen)#global type data mode originate cg-5300-3(cgset_da_o)#host-access cg-5300-3 cg-5300-3(cgset_da_o)#host-access cg-5300-4 If cg-5300-4 is the terminate side, the same commands are used in global mode, as follows: cg-5300-4(callgen)#global type data mode terminate cg-5300-4(cgset_da_o)#host-access cg-5300-3 cg-5300-4(cgset_da_o)#host-access cg-5300-4 Enabling Chat Scripts [no] auto-config-dialer enable Enables chat scripts called dial, map-class, and dialer-list. The dialer-list defines the interested traffic that will trigger the DDR call. 7-10 Callgen User Manual Cisco Company Confidential Specifying the Interface This is a global-mode, originate-only command. For example: cg-5300-3(callgen)#global type data mode originate cg-5300-3(cgset_da_o)#auto-config-dialer enable Specifying the Interface [no] config-dialer {Asyne I Dialer} interface _number Serial serial_number : timeslot_number Configures async or dialer interfaces as well as the Serial D channel interface to be used to bring up the PPP session. For ISDN data calls, specify Dialer followed by the dialer interface number. For modem calls, specify Asyne followed by the async interface number, serial_number is the serial interface number, and timeslot_number is the D channel time slot. For example, the time slot number is 15 for El and 23 for Tl. This is a channel-mode, originate-only command. If you specify Dialer, this command also configures “username Isdn# password 0 cisco”, where # represents the dialer interface number. If you specify Async, it configures “username Async# password 0 cisco”. Make sure that the channel is configured with a source address before issuing this command, because the same IP address is used to configure the dialer or async interface. The data CTM requires that the source IP address of a channel be the same as the IP address of the dialer or async interface. In the following example, the user intends to use El 0 and Dialer3, so interface Dialer3 and interface Serial0:15 are configured. cg-5300-3(callgen)#chan 1 type data mode originate cg-5300-3(cgch_l_da_o)#source address 112.2.2.2 cg-5300-3(cgch_l_da_o)#config-dialer Dialer 3 Serial 0 : 15 Specifying the Serial D Channel Interface [no] config-dialer-interface Serial serial_int_number : timeslotJnumber Configures the Serial D channel interface on the terminate side. This command configures “username Isdn# password 0 cisco”. By default, it assumes 60 dialer interfaces. When the config-dialer-interface command is used, ip unnumbered FastEthernetO is configured on the terminate side. Make sure that FastEthernetO is configured with an IP address. If not, change it to the corresponding Ethernet interface. For example, ip unnumbered EthernetO. This is a global-mode, terminate-only command. For example: cg-5300-4(callgen)#global type data mode terminate cg-5300-4(cgset_da_t)#config-dialer-interface Serial 0 : 15 Specifying Group Async Interface [no] config-Group-Asyne group_async_number range range_low range Jiigh Configures the Group-Async interface on the terminate side, rangeJow and range Jiigh are the Async interfaces that belong to the same group specified by group_async_number. The range Cisco Company Confidential Data Call Type Module 7-11 Creating a Data CTM IOS Configuration should include the Async interfaces that have been configured on the originate Callgen. If any Async interfaces within that range are already a member of another Group-Async interface, an error message is displayed. This is a global-mode, terminate-only command. For example: cg-5300-4(callgen)#global ty data mode terminate cg-5300-4(cgset_da_t)#config-Group-Async 3 range 1 30 Building configuration... cg-5300-4(cgset_da_t) # IOS Configuration Issues Loopback Interface on the Terminate Channel The command source address IP_address in a terminate channel creates a loopback interface in Terminate IOS, as follows: cg-5300-3(callgen)#chan 1 type data mode terminate cg-5300-3(cgch_l_da_t)#source address 113.3.3.3 interface LoopbacklO ip address 113.3.3.3 255.255.0.0 secondary ip address 100.100.100.100 255.255.255.255 no logging event link-status By default, it uses loopback interface 10 and assigns 100.100.100.100 to its primary IP address. Then it puts the channel’s source address as a secondary IP address. If you have a couple of terminate channels, all the source IP addresses are added as secondary in loopback 10. This interface is removed only when the clear configuration command is used. If the channel is removed, the corresponding IP address is removed from the loopback interface. ISDN Status The ISDN status needs to be “network” on one side, and “user” on the other side. To check this, use the show isdn status command in IOS exec mode. In addition, the Layer 2 state needs to be in MULTIPLE_FRAME_ESTABLISHED. To make one side “network” and to establish ISDN connectivity, use the following commands in the corresponding Serial D interface: isdn net shut no shut Making an ISDN Data Call This example assumes that Callgen Originate and Callgen Terminate are connected back to back. Originate side: Step 1 Step 2 7-12 Callgen User Manual In global mode, use the host-access command. In global mode, use the auto-eonfig-dialer enable command. Cisco Company Confidential Making a Modem Call Step 3 To configure channels, use the config-dialer Dialer command in channel mode. Make sure that the source IP address is configured for the channel before issuing this command. Terminate side: Step 1 In global mode, use the host-access command. Step 2 In global mode, use the config-dialer-interface command. Step 3 To configure channels, use the config-dialer Dialer command in channel mode. Make sure that the source IP address is configured for the channel before issuing this command. Making a Modem Call This example assumes that Callgen Originate and Callgen Terminate are connected back to back. Originate side: Step 1 In global mode, use the host-access command. Step 2 In global mode, use the auto-config-dialer enable command. Step 3 To configure channels, use the config-dialer Async command in channel mode. Make sure that the source IP address is configured for the channel before issuing this command. Terminate side: Step 1 In global mode, use the host-access command. Step 2 In global mode, use the config-Group-Async command. Step 3 To configure channels, use the config-dialer Async command in channel mode. Make sure that the source IP address is configured for the channel before issuing this command. Data CTM Channel Status The callgen show channel man command displays the following statistics and configuration information for the specified data channel: 5300-1 (callgen)#show chan 1 Channel 1 Call Statistics elasped channel run time: OOwOdll:22:26.992 and counting channel state: IDLE setup attempts: 2125 accepts: 2125 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 passed-calls: 2125 failed-calls: 0 setup rate: 3 calls per minute accept rate: 3 calls per minute setup time: min: 972ms, max: 1664ms, avg: 1245ms hold time: min: 15000ms, max: 15012ms, avg: 15000ms disconnect time: min: 12ms, max: 52ms, avg: 22ms idle time: min: 3000ms, max: 3068ms, avg: 3000ms packets sent: 53125 bytes sent: 12665000 missing receive data packets: 0 of 0 Cisco Company Confidential Data Call Type Module 7-13 Troubleshooting the Data CTM and Related DDR Configurations channel state: Inactive Dialer successes: 2125, failures: 0, last: none tcp active time: 0ms tcp packets sent: 0 tcp packets recevied: 0 tcp bytes sent: 0 tcp bytes received: 0 tcp transmit rate: 0 bytes/sec tcp receiving rate: 0 bytes/sec tcp packets verify errors: 0 tcp echo: on tcp state: tcp last error: tcp connect attempted: 0 tcp connect errors: 0 tcp connect reset: 0 tcp connect timeout: 0 Channel 1 Current Settings channel is of class olsdn channel type is data channel mode is originate minimum call-to-call-delay is 0 seconds call duration is 15 seconds minimum inter-call-delay is 3 seconds start-to-start-delay is 0 seconds start-time-delay is 0 seconds dialer-interface Dialerl setup-timeout 10 seconds teardown-timeout 10 seconds frame size 256 frame rate 90 per minute frame pattern zeros source address 110.1.0.1 source port 12321 destination address 112.1.0.1 destination port 12321 “Packets” and “bytes sent” indicate how many packets were sent by this channel to the other channel. “Missing receive data packets” indicates how many of the data packets received by the interface were dropped vs. the total number of packets received by the interface. For an explanation of some of the common statistics counters, see Displaying Channel Information (page 4-12) . Troubleshooting the Data CTM and Related DDR Configurations The data CTM and DDR use a lot of IOS functionality. Aside from the basic router configuration and troubleshooting skills, the following DDR and related references can be of assistance: • http://www.cisco.com/univercd/cc/td/doc/product/software/iosll3ed/113ed cr/dial c/dcprt4/ index.htm • http://wwwin-eng.cisco.com/Eng/IOS/Comm Server/SW Unit Functional Specs/ vpdndialout.fs.fm@ 1 • http://wwwin-eng.cisco.eom/~ketavlor/voip/Callgen/dataCTM/SampleConfigs/ To help avoid problems, try starting with configurations that are known to be good. If you need to start from scratch, get one originate/terminate pair working before creating any remaining channels. If the show command indicates failures, use the show log command to find out which channels failed: 7-14 Callgen User Manual Cisco Company Confidential Troubleshooting the Data CTM and Related DDR Configurations 5300-1(callgen)#show Aggregate Call Statistics Elasped time of session: OOwOdOO:02:29.292 and counting Originate Statistics active channels: 60 of 120 setup attempts: 150 accepts: 112 confirms: 0 setup-fails: 1 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 5300-1(callgen)#show log CH155_12:39:50.751 (setup-error. Timeout waiting for setup): from state Setup, setup 30000 ms, duration OOwOdOO:00:00.000, teardown:0 ms DDR call setup failures can occur for numerous reasons. With modem calls, for example, the dialer could fail to find the required resources, the CHAT script could fail, or the PPP negotiation could fail. The failure indicated above was detected by the dialer: 5300-1(callgen)#show chan 155 Channel 155 Call Statistics elasped channel run time: OOwOdOO:02:41.444 and counting channel state: IDLE setup attempts: 2 accepts: 1 confirms: 0 setup-fails: 1 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 passed-calls: 1 failed-calls: 1 setup rate: 1 calls per minute accept rate: 22 calls per hour setup time: min: 21760ms, max: 21760ms, avg: 21760ms hold time: min: 15000ms, max: 15000ms, avg: 15000ms disconnect time: min: 152ms, max: 152ms, avg: 152ms idle time: min: 30000ms, max: 54000ms, avg: 42000ms packets sent: 26 bytes sent: 5996 missing receive data packets: 0 of 0 channel state: Inactive Dialer successes: 1, failures: 1, last: success This dialer statistic is based on the same information reported by the show dialer int command: 5300-l#show dialer int Async55 Async55 - dialer type = IN-BAND ASYNC NO-PARITY Idle timer (2 secs), Fast idle timer (20 secs) Wait for carrier (30 secs). Re-enable (6 secs) Dialer state is data link layer up Dial reason: ip (s=l11.55.0.1, d=l13.55.0.1) Time until disconnect 1 secs Current call connected 00:00:27 Connected to 5511155 (5300-2) Cisco Company Confidential Data Call Type Module 7-15 Troubleshooting the Data CTM and Related DDR Configurations Dial String Successes Failures Last called Last status 5511155 3 1 00:00:27 successful Default In the 12.0(3.0.3)T release, there are still many types of dial failures that are not captured by this statistic. For example, none of the CHAT or PPP-related failures that were generated during the data CTM verification process were detected by the dialer. To track the status of this issue, see CSCdm03256 . One particular failure was very easy to reproduce under bursty call conditions with modem calls. This failure manifested as an LPC timeout. To keep track of the status of this issue, refer to CSCdm08354 . Whether debugging hard or intermittent call setup failures, the only sure-fire technique at this point is to turn on debugs. For intermittent failures where you are generating lots of calls, be sure to configure a large enough logging buffer and disable console debug messages. To watch for intermittent PPP failures, use the start command to run calls in the background. Regardless of the call type, turn on debug ppp negotiation and debug dial. For intermittent CHAT failures (modem only), use debug chat. While waiting for failures, you can use the Callgen show command periodically to poll the call statistics. Router# config t Router(config)# logging buffer 1048576 Router(config)# no logging console Router(config)# end Router# debug dial Router# debug ppp negotiation Router# debug chat With hard failures, only attempt one call at a time with the start ChannelNumber total-calls 1 command. Also, turn on debug ppp authentication to verify that part of the process is functional. 7-16 Callgen User Manual Cisco Company Confidential CHAPTER 8 Fax Call Type Module The fax CTM supports fax on the Voice Feature Card (Libretto project) and the T.37 Store and Forward Fax (Allegro) systems, and inherits their underlying functionality and capabilities. For Allegro, the fax CTM supports origination and termination of calls on digital Tl/El as well as analog FXS, FXO, and E&M interfaces. Two types of modem modules are supported: MICA and Microcom. MICA modems support fax transmissions only, while Microcom modems support both. The fax CTM requires at least one Ethernet interface. For Libretto, fax origination and termination is available on both Tl/El CAS and ISDN PRI. Libretto requires vcware 8.02, which is located in /tftpboot/libretto-test/Vcware/vcw-vfc-mz.c549.hc.8.02.bin. It does not work with earlier vcware versions. Some configuration parameters are common to both fax interface types; others are specific to either Allegro or Libretto. Specifying the Fax Interface Type You can run either Allegro or Libretto at a given time on a given router. To specify the fax interface type, use the following command at the IOS level; fax interface-type fax-mail For the AS5300 platform, use the following to set the interface type; fax interface-type {vfe I modem} To run the fax CTM in Libretto mode, specify vfc. To run the fax CTM in Allegro mode, specify modem. Note To switch between Allegro and Libretto, you must first reload the router by issuing write erase and then write mem before running the fax interface-type command. Common Fax CTM Configuration Parameters The following parameters are common to both the Allegro and Libretto interface types. Some of the commands, as noted, are class-level commands (see Creating Classes (page 4-11) ). Cisco Company Confidential Fax Call Type Module 8-1 Common Fax CTM Configuration Parameters Specifying the Calling and Called Numbers To establish a call, Callgen must know what number to dial as well as what number to associate with a channel. This is accomplished with the following two parameters: called-number—For originate channels, this specifies the number called. For terminate channels, this specifies the number associated with the specified channel. This is a required parameter for both fax originate and terminate channels. Example: clash-5300(callgen)# channel 1 called-number 19192221212 calling-number—For originate channels only. Specifies the number you are calling from. Optional. Example: clash-5300(callgen)# channel 1 calling-number 2484646 Specifying Payload Transmission To specify a fax payload to transmit, first use the following command to define the location and associate an index to it. global type fax mode orig index value path value For example, the following specifies a TIFF image file located in Flash to use for fax transmission. It is identified by the index value of 1. This is a global-level fax CTM command, in the sense that it is not associated with fax CTM channel or class commands. You can define different fax payloads, such as a single-page fax TIFF image, multipage fax TIFF image, or a simple text file. global type fax mode orig index 1 path flashipage2.tif After defining the global fax commands, you can assign a specific payload from the pool of fax payload definitions configured to an originate channel or class using the following command: payload index value For example, the following chooses the payload “flash:page2.tif' for all fax calls made through channel 1: chan 1 payload index 1 Note You can download the fax payload files page2.txt and page2.tif from /autons/vts/sample/fax. Specifying Payload Reception By default, incoming fax payload is not saved. To save it, first use the following command to define the location and associate an index to it. Callgen dynamically generates the filename consisting of the channel number, the num-th call on the channel, and a suffix of .tif global type fax mode term index value path value For example: global type fax mode term index 1 path flash: Then in the channel definition, use the following command to specify the index: payload save index number 8-2 Callgen User Manual Cisco Company Confidential Verifying Page Count For example: chan 1 payload save index 1 If you specify the payload save index 1 that is pointing to flash:, and you made five fax calls on channel number 1, you will see the following filenames listed in flash: callgen-5300# System flash File Length 1 30861 2 30861 3 30861 4 30861 5 30861 show flash: directory: Name/status chanl_l.tif chanl_2.tif chanl_3.tif chanl_4.tif chanl_5.tif Note Whenever channel 1 receives a fax payload, it is saved as “chanl_#.tif' in flash:. The # indicates the num-th of the call in the same channel. It should match the number of the accepts counter in the show channel command. This is to prevent the tif image from being overwritten by later calls on the same channel. Limitation of IOS: The PCMCIA Flash used in the routers does not process simultaneous write requests to the Flash by queuing the requests. So you can save as many tif files as fax calls generated into the Flash from a single channel, but it would not be able to save all the tif files from multiple simultaneous calls in multiple channels into the Flash. This is only a limitation with the Flash. You can save multiple files from multiple simultaneous calls in multiple channels to TFTP. Verifying Page Count pl-verification type page-count num-pages Checks whether the specified number of pages has been transmitted or received. It can be used with both originate and terminate channels. Example: pl-verification type page-count 2 Verifying Size pl-verification type page-size man-bytes Checks whether the received fax payload is the specified number of bytes. The value specified should be the size of the reference payload being used. Applies to fax terminate channels only. Example: pl-verification type page-size 23526 Specifying Size Tolerance pl-verification size-tolerance num-bytes This command works in conjunction with the pl-verification type page-size command. It allows a tolerance (in number of bytes) to be specified with reference to the actual payload size, within which the page size can be considered a success. Applies to fax terminate channels only. Cisco Company Confidential Fax Call Type Module 8-3 Common Fax CTM Configuration Parameters Example: pl-verification size-tolerance 50 Note To ensure that consistent fax images are received by the terminating Callgen fax channel, make sure that you are using either the page2.tif or page2.txt image file located in the directory /autons/vts/sample/fax/. Also, if the T1 controller type is used, make sure that one end is configured as the clock source internal and the other end is configured as the clock source line. Specifying the Starting Called Number by Class start-called-number number Generates called numbers for the channels of a class. Each channel gets a called number starting from the specified point, which is incremented by 1 or as specified with the called-inerement-step command (see Specifying the Increment for Generating Called Numbers by Class (page 8-5) ). Note Libretto requires a larger number of dial peers: two dial peers are created per channel and for a Libretto fax class, and two class-level dial peers are created for all subsequent channels. When using class-level dial peers, design your called numbers so that they do not overlap, because Callgen does not take care of overlapping called numbers. Example: class f type fax mode originate start-called-number 400 cg-5300-6(callgen)# chan 1-2 class f channel 1 class f called-number 400 channel 2 class f called-number 401 Specifying the Starting Calling Number by Class start-calling-number number Generates calling numbers for the originate channels of a class. Each channel gets a calling number starting from the specified point, which is incremented by 1 or as specified with the calling-increment-step command (see Specifying the Increment for Generating Calling Numbers by Class (page 8-5) ). Example: class f type fax mode originate start-calling-number 800 cg-5300-6(callgen)# chan 1-2 class f channel 1 class f calling-number 800 channel 2 class f calling-number 801 8-4 Callgen User Manual Cisco Company Confidential Specifying the Increment for Generating Called Numbers by Class Specifying the Increment for Generating Called Numbers by Class called-increment-step step Specifies the increment for generating the next called number for the channels in a class. Example: class f type fax mode originate start-called-number 400 called-increment-step 4 cg-5300-6(callgen)# chan 1-2 class f channel 1 class f called-number 400 channel 2 class f called-number 404 Specifying the Increment for Generating Calling Numbers by Class calling-increment-step step Specifies the increment for generating the next calling number for the channels in a class. Example: class f type fax mode originate start-calling-number 400 calling-increment-step 4 cg-5300-6(callgen)# chan 1-2 class f channel 1 class f calling-number 400 channel 2 class f calling-number 404 Using Libretto This section lists the commands specific to Libretto as well as how to configure Libretto on Cisco IOS. Callgen Configuration Commands The following Callgen configuration commands are specific to Libretto. Specifying the Interface Port interface port Originate channels require an interface configuration for sending faxes. Example: interface port:0:D Terminate channels that use digital T1 interface do not require an interface port and receive faxes on any available interface. However, terminating channels that use an analog interface, such as LXO, LXS, or E&M, do require interface configuration: Cisco Company Confidential Fax Call Type Module 8-5 Using Libretto Example for analog FXO, FXS, and E&M interfaces only: interface port:0:D Specifying the Payload Image Encoding Type payload image encoding encode_type Specifies the type of compression encoding scheme to use for Fibretto fax transmission. The options are modified huffman (mh), modified read (mr), and modified modified read (mmr). Example: payload image encoding mmr Specify Payload Image Resolution payload image resolution resolution_type Specifies the resolution for transmitting and receiving faxes. The options are fine and standard. Example: payload image resolution fine Configuring Libretto on Cisco IOS Step 1 On both the Callgen fax originate and terminate routers, enter: mta receive aliases callgen_fax.com Step 2 On both the Callgen fax originate and terminate routers, enter: mta send server ip-addr The IP address must be that of the local Ethernet interface. Step 3 On the router running Libretto, enter: fax interface-type fax-mail For the AS5300 platform, enter: fax interface-type vfc Step 4 Some interactive voice response (IVR) TCL applications for Libretto uses for processing need to be specified in the IOS configuration. Define the following IVR scripts exactly as follows on both the originate and terminate routers: call application voice cgen_libretto_onramp path call application voice cgen_libretto_offramp path path specifies the location of the on-ramp and off-ramp TCL. For example, tftp://10.0.2.10/libretto-test/t37_onrampl3.tcl. Note You can obtain the scripts from /tftpboot/Hhretto-test/Scripts/. You can use t37_onramp 13.tel for cgen_libretto_onramp, and 1 37_offramp.0.0.6. workaround, tel for cgen_libretto_offramp. 8-6 Callgen User Manual Cisco Company Confidential Libretto Debug Commands Libretto Debug Commands Debugging ESMTP Messages debug mta {send I receive} Debugs the ESMTP messages exchanged during call setup. Debugging T30 and T38 Protocol Messages debug fmsp {send I receive} {t30 1138} Debugs T30 and T38 protocol messages exchanged during fax transmission. Debugging Off-ramp and On-ramp Messages debug foip {off-ramp I on-ramp} Debugs the off-ramp (fax origination) and on-ramp (fax termination) message exchanges. Debugging Mail Service Interface Provider Messages debug mspi {send I receive} Debugs the Mail Service Interface Provider messages exchange. Displaying Libretto Channel Status The Callgen show channel command displays the following statistics and configuration information for the specified fax channel for Libretto: cg-5300-6(callgen)#sh chan 1 Channel 1 Call Statistics elapsed channel run time: OOwOdOO:00:30.512 channel state: INACTIVE setup attempts: 5 accepts: 5 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 passed-calls: 5 failed-calls: 0 setup rate: 472 calls per hour accept rate: 472 calls per hour setup time: min: 0ms, max: 0ms, avg: 0ms hold time: min: 30232ms, max: 30512ms, avg: 30344ms disconnect time: min: 0ms, max: 0ms, avg: 0ms idle time: min: 0ms, max: 0ms, avg: 0ms last disconnect cause: 1 - Normal disconnect Tx payload type text Tx Pages/Tx Bytes: 6/52917 Rx Pages/Rx Bytes: 0/0 pl-verify-pass: 0 pl-verify-fail: 0 Cisco Company Confidential Fax Call Type Module 8-7 Using Libretto Channel 1 Current Settings channel type is fax channel mode is originate minimum call-to-call-delay is 0 seconds call duration is 0 seconds minimum inter-call-delay is 0 seconds start-to-start-delay is 0 seconds start-time-delay is 0 seconds reqd-call-to-call-delay is 0 seconds calling-number is not configured called-number is 456 payload index 1 pl-verification type not configured interface is port:0:D modem speed used: 14400 fax call duration: 22 secs Note For an explanation of some of the common statistics counters, see Displaying Channel Information (page 4-12) . Quality of Fax Note This section only applies to Callgen 3.3T and earlier. The quality of fax feature is only available for Libretto (fax on vfc) and not for Allegro (fax on modem). The main focus is on T30 signaling protocol abnormalities. Note To use this feature, you must be familiar with T30 protocol messaging. For information about the T30 protocol, see http://wwwin-eng.cisco.eom/StandardsAVWW/ITU/pdf-files/t/t30.pdf. For Libretto’s T30 implementation, refer to ENG-49930. For ITU’s QoF documents refer to E.452. In the T30 state machine implemented by Libretto, if there is a signaling problem, additional messages are exchanged to resolve the situation. Callgen tracks the DIS, DCS, FTT, RTP and RTN messages. The message exchanges indicate that the network is having a problem (refer to ENG-112383 for implementation and design details). For example, if an FTT is transmitted, it means that the terminate fax machine is having a problem training at the modem speed. Similarly, Libretto has a powerful feature of lowering modem speed if the fax machines are having a problem training at the same speed. For example, if an FTT is received resulting in a subsequent modem speed reduction, Callgen keeps track of the reductions and at what speed the eventual transmission took place. Callgen automatically displays this information in the show channel output for the particular channel if there was a problem in quality of fax. For example: Channel 1001 Current Settings channel is of class LiOr channel type is fax channel mode is originate minimum call-to-call-delay is 0 seconds call duration is 0 seconds minimum inter-call-delay is 10 seconds start-to-start-delay is 60 seconds 8-8 Callgen User Manual Cisco Company Confidential Configuring Allegro on Cisco IOS start-time-delay is 0 seconds reqd-call-to-call-delay is 0 seconds calling-number is not configured called-number is 12341001 payload index 1 pl-verification type page-count 2 interface is port:3:D modem speed used: 14400 fax call duration: 63 secs FTT count: 5 DCS count: 2 Modem Reduction count: 5 Reduced Modem Speed: 2400 Configuring Allegro on Cisco IOS Step 1 On both the Callgen fax originate and terminate routers, enter: mta receive aliases callgen_fax.com Step 2 On both the Callgen fax originate and terminate routers, enter: mta send server ip-addr The IP address must be that of the local Ethernet interface. Step 3 On the router running Allegro, enter: fax interface-type modem Allegro ISDN, Modem, and Dialer Configurations The following are excerpts of ISDN, modem and dialer configurations. isdn switch-type primary-5ess controller T1 0 framing esf linecode b8zs pri-group timeslots 1-24 i interface Serial0:23 no ip address no ip directed-broadcast encapsulation ppp no ip route-cache dialer rotary-group 1 dialer-group 1 isdn switch-type primary-5ess isdn incoming-voice modem no fair-queue i interface Group-Asyncl ip unnumbered FastEthernet0 no ip directed-broadcast encapsulation ppp no ip route-cache ip tcp header-compression no ip mroute-cache async default routing async dynamic address async mode interactive no peer default ip address Cisco Company Confidential Fax Call Type Module 8-9 Configuring Allegro on Cisco IOS no cdp enable group-range 1 48 hold-queue 10 in i interface Dialerl ip unnumbered LoopbackO no ip directed-broadcast encapsulation ppp no ip route-cache no ip mroute-cache dialer in-band dialer idle-timeout 300 dialer-group 1 peer default ip address pool def no fair-queue ppp authentication chap ppp multilink i line 1 48 autoselect ppp modem InOut modem autoconfigure type microcom_hdms rotary 1 transport input all Displaying Allegro Channel Status The Callgen show channel command displays the following statistics and configuration information for the specified fax channel for Allegro: 5300-1 (callgen)#show chan 1 Channel 1 Call Statistics elapsed channel run time: OOwOdOO:00:45.536 channel state: INACTIVE setup attempts: 2 accepts: 2 confirms: 0 setup-fails: 0 aborts: 0 abnormal disconnects: 0 confirmed errors: 0 other errors: 0 passed-calls: 2 failed-calls: 0 setup rate: 158 calls per hour accept rate: 158 calls per hour setup time: min: 0ms, max: 0ms, avg: 0ms hold time: min: 45532ms, max: 46008ms, avg: 45770ms disconnect time: min: 0ms, max: 0ms, avg: 0ms idle time: min: 0ms, max: 0ms, avg: 0ms last disconnect cause: 1 - Normal disconnect Tx payload type tiff Tx Pages/Tx Bytes: 6/65558 Rx Pages/Rx Bytes: 0/0 Channel 1 Current Settings channel type is fax channel mode is originate minimum call-to-call-delay is 0 seconds call duration is 0 seconds minimum inter-call-delay is 0 seconds 8-10 Callgen User Manual Cisco Company Confidential Placing Fax Calls on Analog Interfaces start-to-start-delay is 0 seconds start-time-delay is 0 seconds calling-number is not configured called-number is 5718507 payload index 1 Placing Fax Calls on Analog Interfaces In addition to the digital interfaces, the Libretto project supports analog interfaces on 36XX platforms from 12.2(8)T label. Leveraging on this feature, the Callgen fax CTM supports the analog interfaces for FXS, FXO, and E&M ports to place fax calls. The Callgen configuration required to place the fax calls remains the same, and all the commands are also supported. However, to be able to terminate fax calls on an analog port, you must configure the interface with the corresponding port as part of the fax channel configuration. The interface configuration is not required when the fax call is terminate on the digital port. Note Although the port is configured in the fax channel, the call is still processed and handled by the Libretto application, and the fax is received by the Callgen terminate channel through the store-and-forward mechanism. A sample configuration looks something like this on the terminate side: channel 1 type fax mode terminate called-number 1234 payload save index 1 interface port:6/0/0 The dial-peers created by the fax CTM in IOS based on the above configuration is: dial-peer voice 10000 pots application CALLGEN_FAX_CTM incoming called-number 1234 group 1 direct-inward-dial port 6/0/0 prefix 1234 dial-peer voice 10001 mmoip application fax_on_vfc_onramp_app out-bound group 1 destination-pattern 1234 information-type fax session target mailto:$d$@callgen_fax.com One of the key differences in the POTS dial-peer created for analog interfaces compared to digital interfaces is the configuration of the port and prefix. The port is configured to pick the corresponding POTS dial-peer for an incoming fax call based on the port information. Also note that CALLGEN_FAX_CTM is the application configured in the POTS dial-peer instead of cgen_libretto_onramp. CALLGEN_FAX_CTM adds the prefix to the called number and hands off the call to the Libretto on-ramp TCL script for setting up the ESTMP call leg. Cisco Company Confidential Fax Call Type Module 8-11 Placing Fax Calls on Analog Interfaces 8-12 Callgen User Manual Cisco Company Confidential