Gas Cooktop

How it Works Log In / Sign Up

• Buy Points
• How it Works
• FAQ
• Contact Us
• Questions and Suggestions
• Users

Bosch Loading... N

• NET8666UC/012
• NET8668SUC6
• NET8668SUC/012
• NET8668UC5
• NET8668UC/012
• NET9652UC
• NET9652UC/012
• NETP066SUC4
• NETP066SUC/01
• NETP068SUC7
• NETP666SUC5
• NETP666SUC/01
• NETP668SUC8
• NETP668SUC/012
• NEXXT2
• Nexxt 500 Plus
• Nexxt 800
• Nexxt DLX
• NEXXT WFMC3200UC
• NEXXT WFMC4300UC
• NEXXT WTMC4300US
• NEXXT WTMC4500UC
• NEXXT WTMC6300CN
• NEZ1056
• NEZ34VLA
• NEZ-4112-PPCW42
• NEZ-5130-IRCW4
• NEZ-5130-PPCW4
• NEZ-5230-IRCW42
• NFN-60122-F03
• NFN-60122-F13
• NFN675T019
• NFN-70122-F0A3
• NFN-70122-F1A3
• NGM2
• NGM3054UC2
• NGM3054UC/012
• NGM3054UC/02
• NGM3654UC2
• NGM3654UC/012
• NGM3654UC/022
• NGM5024UC2
• NGM5024UC/012
• NGM5024UC/032
• NGM5054UC2
• NGM5054UC/012
• NGM5054UC/032
• NGM5054UC/04
• NGM5055UC6
• NGM5055UC/013
• NGM5056UC11
• NGM5064UC2
• NGM5064UC/012
• NGM5064UC/032
• NGM5064UC/042
• NGM5455UC6
• NGM5455UC/012
• NGM5456UC9
• NGM5624UC
• NGM5624UC/012
• NGM5624UC/032
• NGM5654UC2
• NGM5654UC/012
• NGM5654UC/032
• NGM5654UC/042
• NGM5655UC6
• NGM5655UC/013
• NGM5656UC10
• NGM5664UC2
• NGM5664UC/012
• NGM5664UC/032
• NGM5664UC/042
• NGM8046UC5
• NGM8054UC2
• NGM8054UC/012
• NGM8054UC/032
• NGM8055UC5
• NGM8055UC/013
• NGM8055UC/023
• NGM8056UC10
• NGM8057UC5
• NGM8065UC6
• NGM8065UC/013
• NGM8065UC/023
• NGM8646UC8
• NGM8654UC2
• NGM8654UC/012
• NGM8654UC/023
• NGM8654UC/032
• NGM8654UC/042
• NGM8655UC5
• NGM8655UC/013
• NGM8656UC6
• NGM8657UC5
• NGM8665UC7
• NGM8665UC/013
• NGMP055UC4
• NGMP055UC/013
• NGMP055UC/023
• NGMP056UC5

Loading... Loading... Nothing found NGM5056UC Instruction Manual48 pgs2.3 Mb0 User Manual3 pgs1.33 Mb0 Installation Instructions40 pgs2.53 Mb0 Supplemental Information2 pgs636.73 Kb0 Specification Sheet3 pgs1.77 Mb0 Installation Instructions36 pgs2.78 Mb0 Installation Instructions40 pgs2.1 Mb0 Instruction Manual52 pgs2.39 Mb0 Use & Care60 pgs3.31 Mb0 Installation44 pgs3.54 Mb0 Design Guide114 pgs39.79 Mb0 Table of contents Loading...

• Gas Cooktop
• Safety Definitions
• 9 WARNING
• 9 CAUTION
• NOTICE:
• Note:
• IMPORTANT SAFETY INSTRUCTIONS
• READ AND SAVE THESE INSTRUCTIONS
• Gas Appliance Safety
• IMPORTANT: SAVE THESE INSTRUCTIONS FOR THE LOCAL ELECTRICAL INSPECTOR’S USE.
• INSTALLER: LEAVE THESE INSTRUCTIONS WITH THE UNIT FOR THE OWNER.
• OWNER: PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
• WARNING
• WARNING
• ▯ For Massachusetts installations:
• Propane Gas Installation
• Equipment and Usage Safety Requirements
• Appliance Handling Safety
• CAUTION
• Safety Codes and Standards
• State of California Proposition 65 Warning:
• WARNING
• Note:
• 1. Providing good ventilation when cooking with gas.
• 2. Operating the unit according to the instructions in this manual.
• Electric Safety
• High Altitude Installation
• Before You Begin
• Tools and Parts Needed
• Parts Included
• ▯ Burner Caps
• Note:
• General Information
• Overall Dimensions
• 30” Models
• (788 mm)
• (940 mm)
• 21 1/4”
• (540 mm)
• 21 1/4”
• (540 mm)
• 3 13/16”
• (97 mm)
• 3 13/16”
• (97 mm)
• Note:
• Preparation
• Electrical Requirements
• 9 CAUTION
• Gas Requirements
• Supply Pressure:
• Cabinet Requirements
• Note:
• Countertop Requirements
• Note:
• 30” Models
• Mounting Requirements
• Ventilation Requirements
• We strongly recommend the installation of ventilation with the appliance. The appliance must be installed according to the furnished instructions.
• 9 CAUTION
• Installation Procedure
• Prepare the Countertop
• 9 WARNING
• Cut out the countertop per the dimensions shown in the section “Cabinet Requirements”.
• Seal the Cooktop with Foam Tape
• Note:
• Apply the self adhesive foam tape in one continuous rectangle directly to the counter around the perimeter of the cutout as shown by the dotted line in the image below. The foam tape should be flush with the edge of the cutout.
• Install the Cooktop
• Insert the cooktop into the cutout. Attach the clamps of the mounting brackets packaged with the cooktop. Use the washer and screws provided.
• Adjust the mounting brackets to desired position and tighten screws to cooktop. Insert adjusting screw into clamp and secure cooktop to countertop.
• Note:
• Tip:
• Connect Gas Supply
• The gas inlet to the unit is located at the right rear of the cooktop.
• Pressure Regulator
• 9 WARNING
• Side View Gas Cooktop Installation
• Connect the gas supply line to the unit pressure regulator using a 1/2” flex gas line connector between manual shut-off valve and pressure regulator. Always use a new flex line.
• Check supply line connections for leaks using a soap solution or non-corrosive leak detection fluid. Do not use a flame of any sort.
• 1. Turn on gas.
• 3. If a leak appears, turn off supply line gas shut-off valve and tighten connections.
• 5. Wipe off all soap solution or detection fluid residue.
• Important Notes for Gas Connection:
• Connect Electrical Supply
• Before connecting the 5-foot (1.5m) supply cord to a wall receptacle, make certain that gas shut-off valve and all burner controls are in OFF position.
• Burner Cap and Burner Base Placement
• 9 WARNING
• 9 WARNING
• The burner caps must be properly placed for the cooktop to function properly. If the burner cap is not properly placed, one or more of the following problems may occur:
• Burner Cap and Burner Base Placement
• Placing Burner Caps and Bases
• Checking Burner Cap Placement
• Checking Burner Cap Placement
• Install Burner Grates
• Properly position and install each burner grate as shown in the illustration below.
• 30” 4 Burner
• 30” 5 Burner
• 36” 5 Burner
• 9 WARNING
• For replacement of rubber feet: Call Customer Support at 1-800-944-2904.
• Check the Installation
• Place each correct sized burner cap in its seated, notched position and check the operation of the electric igniters. Check flame characteristics. Flame should be blue with a minimal yellow tip on the outer cone of the flames.
• Note:
• Service
• Before Calling Service
• If the igniters do not spark or the “on” indicator lights (available in some models) do not glow, check the power source to see if a fuse has blown or if the circuit breaker has tripped.
• Product Rating Label
• The rating label shows the model number and the FD number (production number/product’s unique identifier) of your cooktop. It is located on the underside of the cooktop.
• Model number and FD Number
• The model number and the FD number of your appliance are found on the rating label. Make a note of these numbers in the space below to save time in the event your appliance requires service.
• Définitions de sécurité
• 9 AVERTISSEMENT
• 9 ATTENTION
• AVIS :
• Remarque :
• IMPORTANTES CONSIGNES DE SÉCURITÉ
• LIRE ET CONSERVER CES INSTRUCTIONS
• Utilisation sécuritaire de l'électroménager alimenté au gaz :
• IMPORTANT : CONSERVEZ CES CONSIGNES À L'INTENTION DE L'INSPECTEUR EN ÉLECTRICITÉ.
• INSTALLATEUR : PRIÈRE DE LAISSER CES CONSIGNES AVEC CET APPAREIL À L'INTENTION DU PROPRIÉTAIRE.
• PROPRIÉTAIRE : PRIÈRE DE CONSERVER CES CONSIGNES POUR RÉFÉRENCE ULTÉRIEURE.
• AVERTISSEMENT
• AVERTISSEMENT
• ▯ Pour les installations au Massachusetts :
• Installation au gaz propane
• Exigences en matière de sécurité pour l'utilisation et l'équipement
• Sécurité de manutention des appareils
• ATTENTION
• Codes et normes de sécurité
• Avertissement issue de la proposition 65 de l’État de la Californie :
• AVERTISSEMENT
• Remarque :
• 1. assurant une bonne ventilation lors de la cuisson au gaz; et
• 2. utilisant l'appareil selon les instructions de ce manuel.
• Sécurité électrique
• Installation à altitude élevée
• Avant de commencer
• Outils et pièces nécessaires
• Pièces incluses
• ▯ Chapeaux de brûleur
• Remarque :
• Informations générales
• Dimension hors tout
• 31 po
• 37 po
• (940 mm)
• 21 1/4 po
• (540 mm)
• 3 13/16 po
• (97 mm)
• 3 13/16 po
• (97 mm)
• Remarque :
• Préparatifs
• Exigences électriques
• 9 ATTENTION
• Exigences en matière de gaz
• Pression d'admission :
• Exigences concernant les armoires
• Remarque :
• Exigences concernant le plan de travail
• Remarque :
• Modèles de 30 po
• Exigences pour la fixation
• Exigences concernant la ventilation
• Nous recommandons fortement l'installation d'un système de ventilation avec l'électroménager. Il doit être installé conformément aux consignes d'installation fournies.
• 9 ATTENTION
• Procédure d'installation
• Préparation du plan de travail
• 9 AVERTISSEMENT
• Découper le plan de travail aux dimensions indiquées dans la section « Exigences concernant les armoires ».
• Sceller la table de cuisson avec le ruban de mousse
• Remarque :
• Installation de la table de cuisson
• Insérer la table de cuisson dans la découpe. Fixer les pinces du support de fixation livré avec la table de cuisson. Utiliser la rondelle et les vis fournis.
• Régler le support de fixation à la hauteur désirée, et serrer les vis à la table de cuisson. Insérer les vis de réglage dans la pince et fixer solidement la table de cuisson au plan de travail.
• Remarque :
• Conseil :
• Branchement du gaz
• L'admission de gaz de l'appareil est située à droite, à l'arrière de la table de cuisson.
• Régulateur de pression
• 9 AVERTISSEMENT
• Vue latérale de l'installation de la table de cuisson au gaz
• Raccorder la conduite d'alimentation en gaz au régulateur de pression de l'appareil avec un connecteur souple de gaz de 1/2 po entre le robinet d'arrêt manuel et le régulateur de pression. Toujours utiliser une conduite souple neuve.
• Vérifier la présence de fuites des conduites d'alimentation au moyen d'une solution savonneuse ou d’un liquide de détection de fuites non corrosif. Ne jamais utiliser une flamme sans égard au type de flamme.
• 1. Ouvrir le gaz.
• 3. En présence d'une fuite, couper l'alimentation en gaz en fermant le robinet d'arrêt et serrer le ou les raccords qui fuient.
• 4. Tester de nouveau la présence de fuites en ouvrant le robinet d'arrêt de l'alimentation de gaz. Quand aucune bulle n'apparaît, le test de fuite est terminé.
• 5. Essuyer tout résidu de la solution savonneuse ou du liquide de détection de fuite.
• Remarques importantes pour les raccords de gaz :
• Brancher l'alimentation électrique
• Avant de raccorder le cordon d'alimentation de 5 pi (1,5 m) à une prise murale, s'assurer que le robinet d'arrêt et toutes les commandes de brûleur sont en position fermée.
• Positionnement du chapeau et de la base du brûleur
• 9 AVERTISSEMENT
• 9 AVERTISSEMENT
• Il faut que les chapeaux de brûleurs soient correctement positionnés pour le bon fonctionnement de la table de cuisson. Un ou plusieurs problèmes peuvent survenir si un chapeau de brûleur n’est pas bien positionné :
• Positionnement du chapeau et de la base du brûleur
• Positionnement des chapeaux et des bases de brûleur
• Vérification du positionnement du chapeau du brûleur
• Vérification du positionnement du chapeau du brûleur
• Installation des grilles du brûleur
• Positionner et installer correctement la grille de chaque brûleur comme illustré ci-dessous.
• Modèle de 30 po à 4 brûleurs
• Modèle de 30 po à 5 brûleurs
• Modèle de 36 po à 5 brûleurs
• 9 AVERTISSEMENT
• Vérification de l'installation
• Remarque :
• Dépannage
• Avant d'appeler le service de dépannage
• Si les allumeurs ne produisent pas d'étincelles ou que les témoins ne s'allument pas (offerts sur certains modèles), vérifier la source d'alimentation électrique à la recherche d'un fusible grillé ou d'un disjoncteur actionné.
• Plaque signalétique du produit
• La plaque signalétique comporte le numéro de modèle et le numéro FD (numéro de production/code unique d'identification) de la table de cuisson. Elle est située sur le dessous de la table de cuisson.
• Numéro de modèle et numéro FD
• Le numéro de modèle et le numéro FD de l'électroménager figurent sur la plaque signalétique. Prendre ces numéros en note dans l'espace ci-dessous pour sauver du temps, au cas où l'électroménager aurait besoin d'être réparé.
• Definiciones de seguridad
• 9 ADVERTENCIA
• 9 ATENCION
• AVISO:
• Nota:
• INSTRUCCIONES DE SEGURIDAD IMPORTANTES
• LEA Y CONSERVE ESTAS INSTRUCCIONES
• Seguridad para aparatos de gas
• IMPORTANTE: CONSERVAR ESTAS INSTRUCCIONES PARA QUE LAS USE EL INSPECTOR DE ELECTRICIDAD LOCAL.
• INSTALADOR: DEJAR ESTAS INSTRUCCIONES JUNTO A LA UNIDAD PARA EL PROPIETARIO.
• PROPIETARIO: CONSERVAR ESTAS INSTRUCCIONES PARA REFERENCIA FUTURA.
• ADVERTENCIA
• ADVERTENCIA
• ▯ Para instalaciones en Massachusetts:
• Instalación con gas propano
• Requisitos de seguridad del equipo y el uso
• Seguridad de manejo del electrodoméstico
• ATENCION
• Códigos y normas de seguridad
• Advertencia en virtud de la Proposición 65 del estado de California:
• ADVERTENCIA
• Nota:
• 1. Garantizando una buena ventilación cuando se cocina con gas.
• 2. Utilizando la unidad de forma acorde con las instrucciones de este manual.
• Seguridad con la electricidad
• Instalación a gran altitud
• Antes de empezar
• Herramientas y piezas necesarias
• Piezas incluidas
• ▯ Tapas de los quemadores
• Nota:
• Información general
• Medidas totales
• (788 mm)
• (940 mm)
• 21 1/4”
• (540 mm)
• 21 1/4”
• (540 mm)
• 3 13/16”
• (97 mm)
• 3 13/16”
• (97 mm)
• Nota:
• Preparación
• Requisitos eléctricos
• 9 ATENCION
• Requisitos de gas
• Presión de suministro:
• Requisitos del gabinete
• Nota:
• Requisitos de la cubierta
• Nota:
• Modelos de 30"
• Requisitos de instalación
• Requisitos para la ventilación
• Recomendamos encarecidamente instalar un sistema de ventilación con el electrodoméstico. El electrodoméstico debe instalarse de acuerdo con las instrucciones facilitadas.
• 9 ATENCION
• Procedimiento de instalación
• Preparar la cubierta
• 9 ADVERTENCIA
• Cortar la cubierta de acuerdo a las medidas indicadas en la sección «Requisitos del gabinete».
• Sellar la placa de cocción con cinta de espuma
• Nota:
• Instalar la placa de cocción
• Insertar la placa de cocción en el recorte. Fijar las sujeciones de las placas de sujeción que vienen con la placa de cocción. Utilizar la rondana y los tornillos provistos.
• Ajustar las placas de fijación en la posición deseada y apretar los tornillos a la placa de cocción. Insertar el tornillo de ajuste en la sujeción y fijar la placa de cocción a la cubierta.
• Nota:
• Consejo:
• Conectar el suministro de gas
• La entrada de gas de la unidad está situada en la parte posterior derecha de la placa de cocción.
• Regulador de presión
• 9 ADVERTENCIA
• Vista lateral de la instalación de la placa de cocción de gas
• Conectar el tubo de suministro de gas con el regulador de presión mediante un conector de tubo de gas flexible de 1/2 pulgada entre la válvula de cierre manual y el regulador de presión. Siempre utilizar un tubo flexible nuevo.
• Comprobar que no haya fugas en las conexiones de los tubos de suministro mediante una solución jabonosa o un fluido de detección de fugas que no sea corrosivo. No utilizar ningún tipo de llama.
• 1. Abrir el gas.
• 3. Si se detecta una fuga, cerrar la llave de cierre del suministro de gas y apretar las conexiones.
• 4. Volver a comprobar si hay fugas abriendo la llave. Cuando se finaliza la comprobación de fugas (no aparecen burbujas), la prueba ha terminado.
• 5. Limpiar con un trapo todos los restos de fluido de detección o solución jabonosa.
• Notas importantes acerca del suministro de gas:
• Conexión de la alimentación eléctrica
• Antes de conectar el cable de alimentación de 5 pies (1.5 m) a un enchufe de pared, asegurarse de que la llave de cierre del gas y todos los controles los quemadores estén en posición OFF (apagado).
• Colocación de las tapas y las bases de los quemadores
• 9 ADVERTENCIA
• 9 ADVERTENCIA
• Las tapas de los quemadores deben estar colocadas correctamente para que la placa de cocción funcione bien. Si la tapa del quemador no está bien colocada, podrían darse uno o varios de los siguientes problemas:
• Colocación de las tapas y las bases de los quemadores
• Colocar las tapas y las bases de los quemadores
• Comprobar la colocación de las tapas de los quemadores
• Comprobar la colocación de las tapas de los quemadores
• Colocar las rejillas de los quemadores
• Posicionar y colocar cada rejilla de quemador como se muestra en la ilustración de abajo.
• 30”, 4 quemadores
• 30”, 5 quemadores
• 36”, 5 quemadores
• 9 ADVERTENCIA
• Para patas de hule de repuesto: llamar al Servicio de Asistencia Técnica en el número 1-800-944-2904.
• Pruebe la instalación
• Nota:
• Servicio técnico
• Antes de llamar al servicio técnico
• Etiqueta de clasificación del producto
• La etiqueta de clasificación muestra el número de modelo y el número FD (número de producción/ identificador único del producto) de la placa de cocción. Está ubicada en el lado inferior de la placa de cocción.
• Número de modelo y número FD
• El número de modelo y el número FD del electrodoméstico se pueden ver en la etiqueta de clasificación. Apuntar esos números en el espacio para ahorrar tiempo en caso de que el electrodoméstico necesite servicio técnico.

Bosch NGM5056UC Installation Instructions ... Bosch Installation Instructions Download

Gas Cooktop

Installation Manual NGM5056UC, NGM5656UC, NGM8056UC, NGM8656UC, NGMP056UC, NGMP656UC, NGM8046UC, NGM8646UC Table of Contents Use and care manual Safety Definitions .......................................................... 2 IMPORTANT SAFETY INSTRUCTIONS ........................ 3 Gas Appliance Safety .......................................................... 3 Propane Gas Installation ..................................................... 4 Equipment and Usage Safety Requirements .................. 4 Appliance Handling Safety ................................................. 5 Safety Codes and Standards ............................................. 5 State of California Proposition 65 Warning: .................... 5 Electric Safety ....................................................................... 5 High Altitude Installation ..................................................... 5 Before You Begin .......................................................... 6 Tools and Parts Needed ..................................................... 6 Parts Included ....................................................................... 6 General Information ............................................................. 6 7KLV%RVFK$SSOLDQFHLVPDGHE\ %6++RPH$SSOLDQFHV&RUSRUDWLRQ 0DLQ6WUHHW6XLWH ,UYLQH&$ 4XHVWLRQV" Preparation ............................................................................ 6 Installation Procedure .................................................. 8 Prepare the Countertop ...................................................... 8 Seal the Cooktop with Foam Tape ................................... 8 Install the Cooktop ............................................................... 9 Connect Gas Supply ........................................................... 9 Connect Electrical Supply ............................................... 10 Burner Cap and Burner Base Placement ..................... 10 Install Burner Grates ......................................................... 12 Check the Installation ....................................................... 12 Service ......................................................................... 13 Before Calling Service ..................................................... 13  ZZZERVFKKRPHFRPXV :HORRNIRUZDUGWRKHDULQJIURP\RX

Safety Definitions

9WARNING

This indicates that death or serious injuries may occur as a result of non-observance of this warning.

9CAUTION

This indicates that minor or moderate injuries may occur as a result of non-observance of this warning.

NOTICE: This indicates that damage to the appliance or property may occur as a result of non-compliance with this advisory.

Note: This alerts you to important information and/or tips.

2

9IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY I NST RUCT I ONSREAD AND SAVE THESE INSTRUCTIONS

Gas Appliance Safety

 :$51,1*,IWKHLQIRUPDWLRQLQWKHVHLQVWUXFWLRQV LVQRWIROORZHGH[DFWO\DILUHRUH[SORVLRQPD\ UHVXOWFDXVLQJSURSHUW\GDPDJHSHUVRQDOLQMXU\ RUGHDWK ² 'RQRWVWRUHRUXVHJDVROLQHRURWKHUIODPPDEOH YDSRUVDQGOLTXLGVLQWKHYLFLQLW\RIWKLVRUDQ\ RWKHUDSSOLDQFH ² :+$772'2,)<2860(//*$6  'RQRWWU\WROLJKWDQ\DSSOLDQFH  'RQRWWRXFKDQ\HOHFWULFDOVZLWFK  'RQRWXVHDQ\SKRQHLQ\RXUEXLOGLQJ ,PPHGLDWHO\FDOO\RXUJDVVXSSOLHUIURPD  QHLJKERU·VSKRQH)ROORZWKHJDVVXSSOLHU·V LQVWUXFWLRQV  ,I\RXFDQQRWUHDFK\RXUJDVVXSSOLHUFDOO WKHILUHGHSDUWPHQW ,QVWDOODWLRQDQGVHUYLFHPXVWEHSHUIRUPHG ² E\DTXDOLILHGLQVWDOOHUVHUYLFHDJHQF\RUWKH JDVVXSSOLHU 3 9IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS

IMPORTANT: SAVE THESE INSTRUCTIONS FOR THE LOCAL ELECTRICAL INSPECTOR’S USE.

INSTALLER: LEAVE THESE INSTRUCTIONS WITH THE UNIT FOR THE OWNER.

OWNER: PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

WARNING

When properly cared for, your new appliance has been designed to be safe and reliable. Read all instructions carefully before use. These precautions will reduce the risk of burns, electric shock, fire and injury to persons. When using kitchen appliances, basic safety precautions must be followed including those in the following pages.

WARNING

Do not repair, replace or remove any part of the appliance unless specifically recommended in the manuals. Improper installation, service or maintenance can cause injury or property damage. Refer to this manual for guidance. All other servicing must be done by an authorized service agency. ▯ Install a gas shutoff valve near the appliance. It must be easily accessible in an emergency. ▯ Leak testing must be conducted by the installer according to the instructions in this manual. ▯ The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing at pressures in excess of 1/2 psi (3.5 kPa). ▯ The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psi (3.5 kPa). ▯ The minimum supply pressure must be 1” water column above the manifold pressure printed on the data plate. ▯ The maximum supply pressure must not exceed 14.0 inches water column (34.9 Millibars).

▯ For Massachusetts installations:

▯ Installation must be performed by a qualified or licensed contractor, plumber or gas fitter qualified or licensed by the state, province or region where this appliance is being installed. ▯ Shut-off valve must be a “T” handle gas cock. ▯ Flexible gas connector must be new and not longer than 36 inches. ▯ Installer-show the owner where the gas shut-off valve is located.

Propane Gas Installation

▯ The propane gas tank must be equipped with its own high pressure regulator. In addition, the regulator supplied with this unit must also be used. ▯ The appliance is shipped from the factory for use with natural gas. It must be converted for use with propane. A qualified technician or installer must do the conversion.

Equipment and Usage Safety Requirements

▯ The cooktop must be used in conjunction with a suitable ventilation system. ▯ Remove all tape and packaging before using the appliance. Destroy the packaging after unpacking the appliance. Never allow children to play with packaging material. ▯ Never modify or alter the construction of the appliance. For example, do not remove panels, wire covers or screws. ▯ To eliminate the risk of burns or fire while reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a hood that projects horizontally a minimum of 5 inches beyond the bottom of the cabinet. ▯ Verify that cabinets above the cooktop are a maximum of 13 inches (330mm) deep. 4 9IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS

Appliance Handling Safety

CAUTION

▯ Unit is heavy and requires at least two people or proper equipment to move. ▯ Hidden surfaces may have sharp edges. Use caution when reaching behind or under appliance.

Safety Codes and Standards

▯ This appliance complies with one or more of the following standards: ANSI Z21.1, Household Cooking Gas Appliances ▯ It is the responsibility of the owner and the installer to determine if additional requirements and/or standards apply to specific installations. ▯ Installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54 or, in Canada, the Natural Gas and Propane Installation Code, CSA B149.1. ▯ The appliance must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code ANSI/ NFPA 70 or the Canadian Electric Code, CSA C22.1- 02.

State of California Proposition 65 Warning:

WARNING

This product can expose you to chemicals including vinyl chloride, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Note: IMPORTANT SAFETY NOTICE: The California Safe

Drinking and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defect or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances. The burning of gas cooking fuel and the elimination of soil during self-cleaning can generate small amounts of carbon monoxide. The fiberglass insulation in Self Clean ovens gives off very small amounts of formaldehyde during the first several cleaning cycles. California lists formaldehyde as a potential cause of cancer. Carbon monoxide is a potential cause of reproductive toxicity. Exposure to these substances can be minimized by: 1.

Providing good ventilation when cooking with gas.

2.

Operating the unit according to the instructions in this manual.

Electric Safety

▯ Before you plug in an electrical cord, be sure all controls are in the OFF position. ▯ For appliances equipped with a cord and plug, do not cut or remove the ground prong. It must be plugged into a matching grounding type receptacle to avoid electrical shock. If there is any doubt as to whether the wall receptacle is properly grounded, the customer should have it checked by a certified electrician. ▯ This appliance should be installed in accordance with the National Electric Code or Canadian Electrical Code. It is required that the cooktop be installed on a grounded, non-GFCI branch circuit. ▯ Installer-show the owner the location of the circuit breaker or fuse. Mark it for easy reference. ▯ Before installing, turn power OFF at the service panel. Lock service panel to prevent power from being turned ON accidentally. ▯ Be sure your appliance is properly installed and grounded by a certified technician. Installation, electrical connections and grounding must comply with all applicable codes.

High Altitude Installation

Contact customer service for use at altitudes above 2,000 feet (610 meters). 5

Before You Begin

( )

Tools and Parts Needed

▯ Phillips Head Screwdriver ▯ Precision Flathead Screwdriver ▯ Tape Measure ▯ Teflon Tape (Gas Rated) ▯ Adjustable Wrench or Channel Lock Pliers

Parts Included

▯ Foam Tape ▯ Mounting Brackets (4) ▯ Screws, #10-32 x 2 1/2” (63.8 mm) (4) ▯ Sheet Metal Screws, #8 x 3/8” (9.5 mm) (4) ▯ Washers (4) ▯ Burner Grates (3) ▯ Burners ▯ 30” models: (4) or (5) ▯ 36” models: (5)

▯ Burner Caps

▯ 30” models: (4) or (5) ▯ 36” models: (5) ▯ Pressure Regulator ▯ LP Gas Conversion Kit

Note: If parts are missing or damaged, call the number or write to the address listed on the inside back cover.

Preparation

Electrical Requirements

9CAUTION

Do not use an extension cord with the gas cooktop. This appliance requires a 60 Hz, 15 Amp, 120 VAC connection. Plan the installation so that the power connection is accessible from the front of the cabinet.

Gas Requirements

Supply Pressure:

▯ Natural Gas: 7 inches water column (14.9 Millibars) ▯ Propane Gas: 11 inches water column (27.4 Millibars) The propane gas tank must be equipped with its own high pressure regulator in addition to the pressure regulator supplied with this unit. The cooktop is shipped from the factory for use with natural gas. For use with LP conversion, a certified technician or installer must do the conversion.

Cabinet Requirements

General Information

Overall Dimensions

30” Models36” Models

Width (Side to Side)31”

(788 mm)

Depth (Front to Back)21 1/4”

(540 mm)

Height (Top to Bottom)3 13/16”

(97 mm)

Note: These are overall dimensions NOT cutout dimensions.

37”

(940 mm)

21 1/4”

(540 mm)

3 13/16”

(97 mm)

Depth from Back Wall Cabinet 13" (330) max. Centered over cooktop NGM30 - min. 30" (762) NGM36 - min. 36" (914) Above counter - min. 30" (762) min. 18" (458) Left Side min. 12" (305) to combustible surface Rear wall - 2" (51mm) Right Side min. 12" (305) =mm ▯ Instructions are based on standard American cabinets 36” high (91cm) x 24” deep (61cm) with a 25” (63cm) countertop. ▯ The maximum depth of a cabinet installed above the cooktop is 13” (33cm).

Note: All measurements given must be precisely followed. If nonstandard cabinets are used, make sure they are installed with minimum dimensions shown.

Plan the installation of the unit so that the power cord, gas shut-off valve and gas pressure regulator are accessible from the front of the cabinet. 6

Countertop Requirements

Mounting Requirements

Note: All measurements given must be precisely

followed. If nonstandard cabinets are used, make sure they are installed with minimum dimensions shown in image below.  gas connection * 1ʎ/ʓʘ” (37) *Dimension from countertop to top of grates **When installed in combination with a hood, refer to hood manufacturer ’s requirements for installation. ( )=mm Use the hold down brackets supplied. See “Install the Cooktop” section for further details.

Ventilation Requirements

We strongly recommend the installation of ventilation with the appliance. The appliance must be installed according to the furnished instructions.

9CAUTION

The appliance should not be installed with a ventilation system that blows air downward toward the burners. This type of ventilation system may cause ignition and combustion problems with the gas cooking appliance resulting in personal injury or unintended operation.

30” Models

 *Dimension from countertop to top of grates **When installed in combination with a hood, refer to hood manufacturer ’s requirements for installation. gas connection * 1ʎ/ʓʘ” (37) ( )=mm 36” Models 7

Installation Procedure

Prepare the Countertop

9WARNING

To avoid electrical shock hazard, before installing the cooktop, switch power off at the service panel to prevent the power from being switched on accidentally.

Cut out the countertop per the dimensions shown in the section “Cabinet Requirements”.

Some solid surface materials require different cutting methods. Consult with the solid surface manufacturer for the correct cutting method needed. Apply heat reflective tape such as Scotch Aluminum Foil Tape #425 or #427 (not included) around the cutout so that it folds over the top and sides. Do not wrap the tape underneath the cooktop. Be sure the tape extends beyond the outermost flange of the cooktop. All corners should be covered with tape.

Seal the Cooktop with Foam Tape

Note: Failure to install the foam tape may affect burner

performance.

Apply the self adhesive foam tape in one continuous rectangle directly to the counter around the perimeter of the cutout as shown by the dotted line in the image below. The foam tape should be flush with the edge of the cutout.

$ Foam Tape Placement-Counter Cutout AFoam Tape Placement Solid Surface Countertops-Counter Cutout AHeat Reflective Tape $ 8

Install the Cooktop

Insert the cooktop into the cutout. Attach the clamps of the mounting brackets packaged with the cooktop. Use the washer and screws provided.

' $

Connect Gas Supply

The gas inlet to the unit is located at the right rear of the cooktop.

Install the pressure regulator (supplied with unit) to manifold pipe using Teflon tape on threads of manifold pipe. Turn to hand tighten plus 1/4 turn, not exceeding 1 turn for alignment. To prevent possible damage to the gas pressure regulator, install it after the cooktop is in its permanent position. When the regulator is securely installed on the manifold pipe, the conversion nut will be easily accessible. % * ( + &

Adjust the mounting brackets to desired position and tighten screws to cooktop. Insert adjusting screw into clamp and secure cooktop to countertop.

Attaching Mounting Brackets ACooktop B/H Hold Down Bracket C/E Adjusting Screw DFoam Tape (Seal) GWooden Block (to be used with solid surfacing material)

Note: For solid surface material installations:

▯ Insert a wooden block between the end of the screw and the bottom of the countertop. ▯ Do not overtighten adjusting screw. ▯ Trim excess aluminum tape around cooktop flange.

Tip: Install hold down bracket without the adjusting screw installed. Turn hold down brackets flush with the sides of the cutout. This will help with inserting cooktop in hard-to-reach spaces.

$ %&

Pressure Regulator

AManifold Pipe BConversion Nut CPressure Regulator

9WARNING

Do not attempt any adjustment of the pressure regulator, except when converting to propane. Adjustments could lead to leaks or cause incorrect gas pressure to the appliance. 9

Side View Gas Cooktop Installation

Important Notes for Gas Connection:

% $ % & ' ( * Arrow on the back of the pressure regulator shows the direction of gas flow. / + - . Gas and Electrical Location ARough-in Cooktop Box BArrow on Pressure Regulator CPressure Regulator D1/2” Female Pipe Threads EFlexible Gas Line GPower Cord (60 inches/1,524mm) H120 Volt Receptacle JGas Cut-off Valve KGas Supply Line Stub-out LFloor

Connect the gas supply line to the unit pressure regulator using a 1/2” flex gas line connector between manual shut-off valve and pressure regulator. Always use a new flex line.

Check supply line connections for leaks using a soap solution or non-corrosive leak detection fluid. Do not use a flame of any sort.

1.

Turn on gas.

2. Apply a soap solution or non-corrosive leak detection fluid to all joints and fittings in the gas connection between the shut-off valve and the cooktop. Include gas fittings and joints in the cooktop if connections may have been disturbed during installation. Bubbles appearing around fittings and connections indicate a leak. 3.

If a leak appears, turn off supply line gas shut-off valve and tighten connections.

4. Retest for leaks by turning on the supply line gas shut­off valve. When leak check is complete (no bubbles appear), test is complete. 5.

Wipe off all soap solution or detection fluid residue.

▯ The appliance and its individual gas shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psi (3.5kPa). ▯ The appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psi (3.5kPa).

Connect Electrical Supply

Before connecting the 5-foot (1.5m) supply cord to a wall receptacle, make certain that gas shut-off valve and all burner controls are in OFF position.

Burner Cap and Burner Base Placement

9WARNING

To prevent flare-ups, do not use the cooktop without all burner caps and all burner grates properly positioned.

9WARNING

To prevent burns, do not touch burner caps or grates while hot. Turn the cooktop off and allow the burners to cool.

The burner caps must be properly placed for the cooktop to function properly. If the burner cap is not properly placed, one or more of the following problems may occur:

▯ Burner flames are too high. ▯ Flames shoot out of burners. ▯ Stainless steel discolors. ▯ Burners do not ignite. ▯ Burner flames light unevenly. ▯ Burner emits gas odor. 10

Burner Cap and Burner Base Placement

Checking Burner Cap Placement

▯ After electrical connection is complete, place each burner base on the corresponding location on the cooktop. One of the three bars on the burner base should line up with the notch and prevent the base from rotating. The small hole or cutout near the edge should also line up with the igniter. Pay special attention to avoid damaging the igniter during installation of the base. See Illustration below. ▯ Once each base is located and resting evenly, place each burner cap on its correct burner base. See Illustration. ▯ Place burner cap gently on top of base so that the prongs of the burner base fit snugly into the groove of the burner cap. ▯ If the maintop is removed by a certified installer (for example to check electrical or piping connection) the panhead screws that were removed must be re­installed to ensure proper functionality of burners. 1 2 ▯ Check to make sure that there is no gap between the burner cap and burner base. See illustration below for correct and incorrect placements of the burner cap. ▯ You may gently try to move the burner cap from side to side to check if it is properly placed. If properly placed, the cap will click from side to side as the prongs hit the groove ridge.

Placing Burner Caps and Bases

Checking Burner Cap Placement

11

Install Burner Grates

Properly position and install each burner grate as shown in the illustration below.

30” 4 Burner

Check the Installation

Place each correct sized burner cap in its seated, notched position and check the operation of the electric igniters. Check flame characteristics. Flame should be blue with a minimal yellow tip on the outer cone of the flames.

Checking Flame Characteristics Yellow Flames: Further adjustment is required. Yellow Tips on Outer Cones: Normal for LP Gas Soft Blue Flames: Normal for Natural Gas

Note: If the flame is completely or mostly yellow, verify that the regulator is set for the correct fuel. After adjustment, retest.

30” 5 Burner

36” 5 Burner

9WARNING

To prevent flare-ups, properly support pots and avoid spills, all grates must be properly positioned on the cooktop whenever the cooktop is in use. Each of the four feet must be placed into the corresponding dimples in the cooktop. Do not use a grate if the rubber feet are missing or damaged. Some yellow streaking is normal during the initial start­up. Allow unit to operate 4-5 minutes and re-evaluate before making adjustments.

For replacement of rubber feet: Call Customer Support at 1-800-944-2904.

12 Loading... + 28 hidden pagesUnhide You need points to download manuals. 1 point = 1 manual. You can buy points or you can get point for every manual you upload. Buy points Upload your manuals Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use