Gigabyte H310M H 2.0 User Manual Page: 17

  1. Home
  2. Home
  3. Gigabyte
  4. Motherboard
  5. H310M H 2.0
  6. User Manual Page: 17
Gigabyte H310M H 2.0 [17/40] Tpm trusted platform module header Gigabyte H310M H 2.0 [17/40] Tpm trusted platform module header11) CLR_CMOS (Clear CMOS Jumper) UsethisjumpertocleartheBIOScongurationandresettheCMOSvaluestofactorydefaults.Toclearthe CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds. Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values. After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manuallyconguretheBIOSsettings(refertoChapter2,"BIOSSetup,"forBIOScongurations).Open: NormalShort: Clear CMOS Values10) TPM (Trusted Platform Module Header) You may connect a TPM (Trusted Platform Module) to this header.12) BAT (Battery)Thebatteryprovidespowertokeepthevalues(suchasBIOScongurations,date,andtimeinformation)in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost.You may clear the CMOS values by removing the battery:1. Turn off your computer and unplug the power cord.2. Gently remove the battery from the battery holder and wait for one minute. (Or use a metal object like a screwdriver to touch the positive and negative terminals of the battery holder, making them short for 5 seconds.) 3. Replace the battery.4. Plug in the power cord and restart your computer. Always turn off your computer and unplug the power cord before replacing the battery. Replace the battery with an equivalent one. Damage to your devices may occur if the battery is replaced with an incorrect model. Contact the place of purchase or local dealer if you are not able to replace the battery by yourself or uncertain about the battery model. When installing the battery, note the orientation of the positive side (+) and the negative side (-) of the battery (the positive side should face up). Used batteries must be handled in accordance with local environmental regulations.Pin No.DenitionPin No.Denition1LAD07LAD32VCC38GND3LAD19LFRAME4No Pin10NC5LAD211SERIRQ6LCLK12LRESETF_USB30F_UB_F_F__BBS_BSB_B_SS__B_U_BS1231231231231111BSSS_SSSU123S3BSSSU__3F_USB3FS_S_S_SFB_B_F_0SS_0F_F____BUS_S_SF_USB0_BB_F_USB3F_USB303__3U121121- 17 -

Table of Content

  • H310m h 2 1
  • Rev 1001 1
  • User s manual 1
  • Copyright 2
  • Disclaimer 2
  • Identifying your motherboard revision 2
  • Chapter 1 hardware installation 3
  • Chapter 2 bios setup 8 3
  • Chapter 3 appendix 7 3
  • H310m h 2 motherboard layout 3
  • Table of contents 3
  • Box contents 4
  • H310m h 2 4
  • H310m h 2 motherboard 4
  • H310m h 2 motherboard layout 4
  • Motherboard driver disk 5 two sata cables 4
  • User s manual 5 i o shield 4
  • 1 installation precautions 5
  • Chapter 1 hardware installation 5
  • 2 product specifications 6
  • 2 productspecifications 6
  • 3 installing the cpu 9
  • 4 installing the memory 9
  • Installing the cpu 9
  • 5 installing an expansion card 10
  • 6 back panel connectors 10
  • D sub port 10
  • Dualchannelmemoryconfiguration 10
  • Hdmi port 10
  • Ps 2 keyboard mouse port 10
  • Usb 2 1 port 10
  • Line in rear speaker out blue 11
  • Line out front speaker out green 11
  • Mic in center subwoofer speaker out pink 11
  • Rj 45 lan port 11
  • Usb 3 gen 1 port 11
  • 7 internal connectors 12
  • 2 atx_12v atx 2x2 12v power connector and 2x12 main power connector 13
  • The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 13
  • To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 13
  • With the use of the power connector the power supply can supply enough stable power to all the components onthemotherboard beforeconnectingthepowerconnector firstmakesurethepowersupplyisturned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 13
  • 4 cpu_fan sys_fan fan headers 14
  • All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 14
  • Be sure to connect fan cables to the fan headers to prevent your cpu and system from 14
  • Overheating overheating may result in damage to the cpu or the system may hang 14
  • Sata3 0 1 2 3 sata 6gb s connectors 14
  • The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device 14
  • Thesefanheadersarenotconfigurationjumperblocks donotplaceajumpercapontheheaders 14
  • To enable hot plugging for the sata ports refer to chapter 2 bios setup peripherals sata andrstconfiguration formoreinformation 14
  • F_audio front panel audio header 15
  • F_panel front panel header 15
  • D1 18 ssrx2 16
  • D1 19 vbus 16
  • Do not plug the ieee 1394 bracket 2x5 pin cable into the usb 2 1 header prior to installing the usb bracket be sure to turn off your computer and unplug the power cord 16
  • F_usb usb 2 1 header 16
  • F_usb30 usb 3 gen 1 header 16
  • From the power outlet to prevent damage to the usb bracket 16
  • Gnd 14 sstx2 16
  • Gnd 17 ssrx2 16
  • Nc 20 no pin 16
  • Pin no definition pin no definition 16
  • Power 5v 6 usb dy 16
  • Power 5v 7 gnd 16
  • Ssrx1 12 d2 16
  • Ssrx1 13 gnd 16
  • Sstx1 15 sstx2 16
  • Sstx1 16 gnd 16
  • Theheaderconformstousb2 1 specification eachusbheadercanprovidetwousbportsviaan optional usb bracket for purchasing the optional usb bracket please contact the local dealer 16
  • Theheaderconformstousb3 gen1andusb2 specificationandcanprovidetwousbports for purchasing the optional 3 front panel that provides two usb 3 gen 1 ports please contact the local dealer 16
  • Usb dx 10 nc 16
  • Usb dx 8 gnd 16
  • Usb dy 9 no pin 16
  • Vbus 11 d2 16
  • After system restart go to bios setup to load factory defaults select load optimized defaults or 17
  • Always turn off your computer and unplug the power cord before replacing the battery replace the battery with an equivalent one damage to your devices may occur if the battery is 17
  • Always turn off your computer and unplug the power cord from the power outlet before clearing 17
  • Bat battery 17
  • Clr_cmos clear cmos jumper 17
  • Contact the place of purchase or local dealer if you are not able to replace the battery by yourself 17
  • Lad0 7 lad3 17
  • Lad1 9 lframe 17
  • Lad2 11 serirq 17
  • Lclk 12 lreset 17
  • Manuallyconfigurethebiossettings refertochapter2 biossetup forbiosconfigurations 17
  • Metal object like a screwdriver to touch the positive and negative terminals of the battery holder making them short for 5 seconds 17
  • No pin 10 nc 17
  • Of the battery the positive side should face up 17
  • Open normal 17
  • Or uncertain about the battery model 17
  • Pin no definition pin no definition 17
  • Replace the battery 4 plug in the power cord and restart your computer 17
  • Replaced with an incorrect model 17
  • Short clear cmos values 17
  • The cmos values 17
  • Thebatteryprovidespowertokeepthevalues suchasbiosconfigurations date andtimeinformation in the cmos when the computer is turned off replace the battery when the battery voltage drops to a low level or the cmos values may not be accurate or may be lost 17
  • Tpm trusted platform module header 17
  • Used batteries must be handled in accordance with local environmental regulations 17
  • Usethisjumpertoclearthebiosconfigurationandresetthecmosvaluestofactorydefaults toclear the cmos values use a metal object like a screwdriver to touch the two pins for a few seconds 17
  • Vcc3 8 gnd 17
  • When installing the battery note the orientation of the positive side and the negative side 17
  • You may clear the cmos values by removing the battery 1 turn off your computer and unplug the power cord 2 gently remove the battery from the battery holder and wait for one minute or use a 17
  • You may connect a tpm trusted platform module to this header 17
  • 1 startup screen 18
  • Chapter 2 bios setup 18
  • 2 the main menu 19
  • Classic setup function keys 19
  • 3 m i t 20
  • Advanced cpu core settings 21
  • C3 state support 21
  • C6 c7 state support 21
  • Cpu clock ratio cpu frequency fclk frequency for early power on 21
  • Cpu enhanced halt c1e 21
  • Cpu flex ratio override 21
  • Cpu flex ratio settings 21
  • Hyper threading technology 21
  • Intel r speed shift technology inte 21
  • Intel r turbo boost technology 21
  • No of cpu cores enabled 21
  • Speed shift technology 21
  • Turbo rati 21
  • Uncore frequency 21
  • Uncore ratio 21
  • Adjacent cache line prefetch 22
  • C10 state support 22
  • C8 state support 22
  • Cpu eist function 22
  • Cpu thermal monitor 22
  • Energyefficientturb 22
  • Extremememoryprofile x m p 22
  • Hardware prefetcher 22
  • Package c state limit 22
  • Race to halt rth 22
  • Ring to core offset down bin 22
  • Voltage optimization 22
  • Advanced memory settings 23
  • Channel interleaving 23
  • Extremememoryprofile x m p 23
  • Memory boot mode 23
  • Memory enhancement settings 23
  • Memory frequency mhz 23
  • Memory multiplier tweaker 23
  • Memory odd ratio 100 133 or 200 266 23
  • Memory odd ratio 100 133 or 200 266 memory frequency mhz 23
  • Memory ref clock 23
  • Memory timing mode 23
  • Profileddrvoltage 23
  • Realtime memory timing 23
  • System memory multiplier 23
  • System memory multiplier memory ref clock 23
  • 3dmark01 enhancement 24
  • Advanced power settings 24
  • Advanced voltage settings 24
  • Case open 24
  • Channel a b memory sub timings 24
  • Cpu core voltage control 24
  • Cpu vcore cpu vccsa dram channel a b voltage 3 v 5v 12v cpu vaxg 24
  • Cpu vcore loadline calibration 24
  • Dram voltage control 24
  • Internal vr control 24
  • Max link speed 24
  • Miscellaneous settings 24
  • Pc health status 24
  • Rank interleaving 24
  • Reset case open status 24
  • Fan control mode 25
  • Fan control use temperature input 25
  • Fan fail warning 25
  • Fan speed 25
  • Fan speed control 25
  • Fan stop 25
  • Monitor 25
  • Smart fan 5 settings 25
  • Temperature 25
  • Temperature interval 25
  • Temperature warning control 25
  • 4 system 26
  • Access level 26
  • System date 26
  • System language 26
  • System time 26
  • 5 bios 27
  • Boot option priorities 27
  • Bootup numlock state 27
  • Fast boot 27
  • Full screen logo show 27
  • Hard drive cd dvd rom drive floppy drive network device bbs priorities 27
  • Security option 27
  • Csm support 28
  • Lan pxe boot option rom 28
  • Mouse speed 28
  • Network stack driver support 28
  • Next boot after ac power loss 28
  • Ps2 devices support 28
  • Sata support 28
  • Usb support 28
  • Vga support 28
  • Windows 8 10 features 28
  • Administrator password 29
  • Other pci device 29
  • Secure boot 29
  • Storage boot option control 29
  • User password 29
  • 6 peripherals 30
  • Above 4g decoding 30
  • Initial display output 30
  • Intel platform trust technology ptt 30
  • Offboardsatacontrollerconfiguration 30
  • Onboard lan controller 30
  • Realtek pcie gbe family controller 30
  • Sw guard extensions sgx 30
  • Intel r bios guard technology 31
  • Ip6configurationpolicy 31
  • Ipv4 http support 31
  • Ipv4 pxe support 31
  • Ipv6 http support 31
  • Ipv6 pxe support 31
  • Legacy usb support 31
  • Mass storage devices 31
  • Media detect count 31
  • Network stack 31
  • Networkstackconfiguration 31
  • Port 60 64 emulation 31
  • Pxe boot wait time 31
  • Trusted computing 31
  • Usb mass storage driver support 31
  • Usbconfiguration 31
  • Xhci hand off 31
  • 7 chipset 33
  • Audio controller 33
  • Dvmt pre allocated 33
  • Dvmt total gfx mem 33
  • High precision timer 33
  • Internal graphics 33
  • Ioapic 24 119 entries 33
  • 8 power 34
  • Ac back 34
  • Dmi aspm 34
  • Pch aspm 34
  • Peg aspm 34
  • Platform power management 34
  • Power on by keyboard 34
  • Cec 2019 ready 35
  • Power loading 35
  • Power on by mouse 35
  • Power on password 35
  • Rc6 render standby 35
  • Resume by alarm 35
  • Soft off by pwr bttn 35
  • 9 save exit 36
  • Boot override 36
  • Exit without saving 36
  • Load optimized defaults 36
  • Loadprofiles 36
  • Save exit setup 36
  • Saveprofiles 36
  • Chapter 3 appendix 37
  • Drivers installation 37
  • Our commitment to preserving the environment 38
  • Regulatory notices 38
  • Regulatory statements 38
  • Restriction of hazardous substances rohs directive statement 38
  • Waste electrical electronic equipment weee directive statement 38
  • Weee symbol statement 38
  • Canada industry canada ic notices canada avis d industry canada ic 39
  • Fcc notice u s a only 39
  • Contact us 40
  • Gigabyte esupport 40
  • To submit a technical or non technical sales marketing question please link to https esupport gigabyte com 40

Similar Devices

  • Gigabyte H310N User Manual
  • Gigabyte H310M S2H User Manual
  • Gigabyte H310 D3 User Manual
  • Gigabyte H310M HD2 User Manual
  • Gigabyte H310M DS2V User Manual
  • Gigabyte H310M DS2 User Manual
  • Gigabyte H310M S2P User Manual
  • Gigabyte H310M S2V User Manual
  • Gigabyte H310M S2 User Manual
  • Gigabyte H310M H User Manual
  • Gigabyte H310M A User Manual
  • Gigabyte X299X DESIGNARE 10G User Manual
  • Gigabyte X299X AORUS MASTER User Manual
  • Gigabyte X299X AORUS XTREME WATERFORCE User Manual
  • Gigabyte X299-WU8 User Manual
  • Gigabyte X299 AORUS MASTER User Manual
  • Gigabyte X299 DESIGNARE EX User Manual
  • Gigabyte X299 AORUS Gaming 7 Pro User Manual
  • Gigabyte X299 UD4 EX User Manual
  • Gigabyte X299 UD4 Pro User Manual

Download Random Discussions

Replies 1

What is the purpose of the SATA connectors on this motherboard? 1 year ago

Replies 0

How to connect a headphone By NJ ni u , 3 years ago

Replies 1

What are the guidelines for installing an expansion card? 1 year ago

Replies 0

can I replace a i3 processor with an i5 or i7? Thanks 1 year ago

Replies 1

What are the specifications of the product? 1 year ago

Từ khóa » H310m H 2.0 Tpm