Glacier Black C-7600 - Cerakote UK Ceramic Coatings

Có thể bạn quan tâm

Skip to content Home / Cerakote® Coatings / C Series - Air Cure

Glacier Black C-7600

Price range: £1.19 through £409.00 ex VAT

Unsurpassed. No other word can adequately describe Cerakote Glacier Black C-7600. Formulated to withstand temperatures up to 1,800°F / 982°C and thermal shock from those temperatures directly into water with no adverse effects, C-7600 retains its deep black, sleek satin finish in the most extreme environments. Cerakote Glacier Series coatings are a line of air cured, ready-to-spray ceramic coatings.

Application

Easy to apply, single coat, air cure formula
85% solids yields higher coverage than any other high temp coating
Self-leveling properties

*NOTE: This product does not require catalyst. This color does require a 100 Mesh Strainer (SE-275).

Performance

Better thermal barrier properties than any other high temperature coating
Industry leading heated and un-heated corrosion resistance
Thermal conductivity is 0.08 W/m-K
Maximum hot and cold adhesion
Exceeds John Deere JDM F14X1 Class 4 testing for high temperature coatings

Check out the Resources section for product application guides, technical data sheets and SDS information.

Please note that prices displayed are ex VAT. VAT will be calculated once a shipping address has been added during the checkout process

Size

Choose an optionGallon 3785ml (128oz)Pint 473ml (16oz)Quart 946ml (32oz)SwatchTester 118ml (4oz)Clear

Glacier Black C-7600 quantity Add to basket SKU: C-7600 Categories: C Series - Air Cure, Up to 1000°C, Up to 260°C, Up to 426°C, Up to 648°C Tags: Black, C-7600, C-series, Cerakote, Glacier Black SearchSearch products …Product categories

Cerakote® Coatings (284)
- Auto & Home (12)
- C Series - Air Cure (46)
  - Up to 1000°C (13)
  - Up to 260°C (44)
  - Up to 426°C (36)
  - Up to 648°C (33)
- Cerakote FX (15)
- Elite Series - Oven Cure (17)
- F-Series - Oven Cure (24)
- H Series - Oven Cure (144)
- Performance Clears - Air & Oven Cure (8)
- Pro Paint (2)
- Specialty Coatings - Air & Oven Cure (12)
- V Series - Up to 1000°C - Oven Cure (12)
Equipment (115)
- Apparel (4)
- Swatch Sets (13)
Kits (6)

Description

Product Technical Data:


Cure Schedule	Air Cure: Tack Free 45 – 60 minutes, Full Cure 5 Days
Recommended Thickness (mil)	1
Strainer Size (mesh)	325 (Part # SE-277)
Gloss Level / Units (GU)	Satin / 25
Density (g/mL)	1.28
% Solids (±2%)	58
Viscosity (cP)	105
Theoretical Coverage per gal @ Recommended Mil Thickness (ft²)	924
Coating Stability (°F) Max. Temp.	1500
Colour Stability (°F) Max. Temp.	400
Chemical Resistance	Excellent
UV Stability	Excellent
Pencil Hardness Gouge ASTM D3363	3H
Pencil Hardness Scratch ASTM D3363	3H
Crosscut Adhesion ASTM D3359	5B
Flexibility (% Resistance) Conical Mandrel Bend ASTM D522	100
Impact Performance Direct/Indirect (in-lbs.) ASTM D2794	160/160

All results based on blasted steel coated at recommended mil thickness using recommended cure schedule.

*Gloss levels are measured at a 60° angle. Adjustments to recommended conditions will yield different results. Gloss is affected by quality of preparation and spray technique. Results are based on coated blasted steel cured following the Cure Schedule specification.

**Viscosity measured under ambient conditions (air temperature, relative humidity) at the time of manufacture.

Recommended Cure Temperature:

Please reference the Cure Schedule specification available on each Cerakote product.

Maximum Temperature is the temperature to which the color or coating is stable.

Chemical Resistance Testing: Results refer to color change based on CIE76 formulation. Results range from:

Excellent: ∆E change of <2.5
Good: ∆E change of <3.0
Fair: ∆E change of <3.5
Poor: ∆E change of <4.0

Testing parameters are as follows:

Hardness or Pencil Hardness Tests are measured from softest to hardest as follows: 9B, 8B, 7B, 6B, 5B, 4B, 3B, 2B, B, HB, F, H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H. 9H is the hardest.
SG-100 ONLY: Hardness test Method A — An X-cut is made through the film to the substrate, pressure-sensitive tape is applied over the cut and then removed, and adhesion is assessed qualitatively on a 0 to 5 scale.
Adhesion is measured on a scale of 0B, 1B, 2B, 3B, 4B, 5B, with 5B being the highest achievable rating.
Flexibility or Conical Mandrel Bend: “100% Resistance” is the highest achievable rating and indicates that the coating did not crack or spall.
Impact Performance (Direct/Indirect) is measured on a scale of 0 inch-lbs. to 160 inch-lbs., with 160 inch-lbs. being the highest achievable rating.

All Cerakote coatings are VOC compliant under the EPA and have low to no VOC content. To find out the VOC content of an individual coating, please contact [email protected] for more information.

This information is accurate to the best of our knowledge, however, it shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. We recommend that you perform adequate tests in your facility to determine if this product meets all of your requirements.

Please feel free to email us at [email protected] if you have any questions.

Safety Data Sheet Application Guide Tech Data Sheet