H 313 Adapter Sleeves With Metric Dimensions

Skip to main content

• Adapter sleeves
• Withdrawal sleeves
• Nuts and locking devices
• Clamp nuts
• Bearing cages
• Special parts

back to overview H 313 Adapter sleeves with metric dimensions

Assembly instructions for Adapter sleeves and withdrawal sleeves for mounting with hydraulic assistance

The bearing can be made to fit the shaft properly by pressing the bearing onto the adapter sleeve or pressing the withdrawal sleeve into the bearing bore. This requires the application of considerable force at the time of mounting, particularly with larger bearings, due to friction at the mating surface between bearing and sleeve or sleeve and shaft. Adapter sleeves and withdrawal sleeves can be fitted with oil inlet grooves and oil distribution channels to make installation and removal easier.

Technical data d1 (mm) 60 d2 (mm) 65 l (mm) 50 d3 (mm) 85 G M 65x2 c1 (mm) 14 c2 (mm) - g - e (mm) - t (mm) - Weight (kg) 0.46 GTIN/EAN Product inquiry Download datasheet i Take note of our assembly / disassembly

Related products

KM 13 Locknuts with metric threads MB 13 Locking washers with metric dimensions © 2025 HSP Schwahlen GmbH, Langenfeld, Germany