H14 Wide Body Shackle - Grofsmederij Nieuwkoop - GN Rope Fittings

• Homepage
• Online catalogue
• Markets
• News
• About us
• Contact

• Homepage
• Online catalogue
• Markets
• News
• About us
• Contact

Online catalogue / H14

H14 WIDE BODY SHACKLE

Specifications

Material

Alloy steel

Safety Factor

≤ 1750 ton 5 times2000 ton 4,5 times≥ 2500 ton 4 times

Finish

Painted

Temperature range

≤ 40 ton -20°C up to +200°C> 40 ton -40°C up to +200°C, Polar Rated

Standard certification

Certificate of Conformity3.1 material certificate EN 10204

More information

Non-standard sizes or custom products available on request

Download more specifications here

Application informationShackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other fittings.Chain or Dee shackles (H9, D15, H11 and D10 shackles) are mainly used on one-leg systems.Anchor, Bow or Wide body shackles (H9, H10 and H14 shackles) are used on one leg and multi-leg systems.End-Joining, Joining and Anchor shackles (D14, D16 and D17 shackles) are used in mooring or anchor lines.

Instructions for useFor screw pins ensure that the pin is correctly screwed into the shackle eye, i.e. tighten hand-tight, then secure using a wrench or other suitable tool so that the collar of the pin is fully seated on the shackle eye. Incorrect seating of the pin may be due to a bent pin, too tight fitting thread or misalignment of the pin holes. Do not use the shackle under these circumstances. Never replace a shackle pin except with one of the same size, type and make as it may not be suitable for the loads imposed.Select the correct type of shackle and its Working Load Limit for the particular application. Should extreme circumstances or shock loading be applicable, this must be well taken into account on selecting the correct shackle. Make sure that the shackle is supporting the load correctly, i.e. along the axis of the shackle body centre line, avoid introduction of bending loads, unstable loads and do not apply overloads. To avoid eccentric loading of the shackle a loose spacer may be used on either end of the shackle pin.

Contact form

Name*Company name*Telephone number*Email address*Comment*

Do you want to know what we do with your data from this form? Then please read our privacy statement.

SendScreenreaders should leave this field blank

© GN Rope Fittings. Grofsmederij Nieuwkoop B.V. - The Netherlands

• Disclaimer
• Cookie statement
• Sitemap
• Privacy Statement