Hammer Extensions - GrovTec

Có thể bạn quan tâm

13 different hammer extensions to fit your firearm with an exposed hammer after you mount a scope.

Note: Due to the varying dimensions of hammers, minor fitting may be required.

Select the correct Hammer Extension for your firearm in menu above.

We do not recommend the use of our hammer extensions for applications not listed.

PART #	FIREARMS FIT	Hammer Slot Dimensions (W x H)
GTHM68	Winchester 94s and Big Bore 94s including angle-eject (except 94/22) and Ithaca X-caliber -	0.360" x 0.139"
GTHM69	Winchester 94/22	0.315" x 0.125"
GTHM70	Marlin Lever Actions 1957-1982	0.320" x 0.094"
GTHM71	Browning BL-22, Astra 357	0.365" x 0.235"
GTHM72	Ruger Blackhawk, H&R Topper, New England Firearms Handi Rifle	0.315" x 0.238"
GTHM73	Browning BLR 1981-1991. Does not fit 1992 & later models. Not for use on folding hammers. Ithaca Tikka 12-70 over/under.	0.555" x 0.190"
GTHM74	All Marlin Lever Actions made in 1983 & later including 39A, 39M, 1894, 1894C, 1895S, 336C, 336T, 375, 444S, Glenfield 30A	0.375" x 0.094"
GTHM79	T/C Contender and S&W Model 29 (DOES NOT FIT T/C G2 Contender)	0.500" x 0.190"
GTHM277	Henry Big Boy, Pre 2010 models	0.300" x 0.187"
GTHM283	Henry Single Shot, Henry Big Boy Centerfire Rifles, Post 2010 models	0.306" x 0.109"
GTHM284	Henry 22 Pump and Lever Action rimfire rifles & Rossi 92/22	0.355" x 0.160"
GTHM285	Browning BLR 1992 -1995 Not for use on folding hammers.	0.630" x 0.208"
GTHM308	Model 36 Marlin (1936-1947) and Marlin 336 (1948-1956)	0.285" x 0.159"
NOTE: MINOR FITTING MAY BE REQUIRED - Not all hammers are made to exact tolerances. Sometimes you may need to lightly file the opening of your grovtec hammer extension to assure a secure fit. We recommend using a small metal file. You can also use some liquid bluing to re-coat the bare metal if necessary.

Từ khóa » Gthm-283