HANNA HI-147-00 Checkfridge Fridge Thermometer + FREE ...

Hanna HI-147-00 Magnetic Fridge Thermometer With Calcheck Function

Checkfridge™ remote sensor thermometer

Key features

• Perfect for refrigerator and incubator monitoring
• Magnetic backing
• Food grade stainless steel thermistor probe on 1 m cable
• Fast response
• Low battery warning

Few manufacturers have given any thought to providing the user a convenient means to monitor internal temperature conditions of a refrigerator or freezer from the outside. Water testing laboratories require constant monitoring of refrigerators and incubators for compliance to standard operations. The HI 147-00 Checkfridge™ is the ideal thermometer for accurate, reliable internal temperature readings. Supplied with

• Battery
• Instructions

Cal Check Feature

Hanna's exclusive Cal Check saves time and brings peace of mind to users in busy catering environments. In hot kitchens, on fast production lines and in hectic retail environments, few operators have the time to keep checking the accuracy of their meters.Thanks to its built-in Hanna Cal Check feature the accuracy of the Checktemp 1 food probe is automatically verified each and every time the meter is used.

NB Cal Check only checks the internal workings of the thermometer and does not take into account the accuracy of the probe being used. For this reason actual readings may still be in error if your attached probe is not working correctly. For this reason full calibration checks may still be advisable. Please take advice from your inspector as required!

Specification

Range	-50 to +150°C
Resolution	0.1°C
Accuracy	+/- 0.3°C between -20 and +90°C, and +/-0.5°C outside that
Probe type	Stainless steel bullet ended 40 x 5mm on 1m cable
Power	1 x 1.5volt AAA giving approx 3 years continuous use
Dimensions	93 x 39 x 31mm, 60 grams

Traceable Calibration Certificate

This unit is shipped with a Traceable Calibration Certificate dated on the day of order and showing results against specified points of +0°C, 70°C & +100°C.

The calibration is carried out to National Standards using UKAS Accredited Laboratory Certificated Equipment. This gives the Certificate a traceability route right back to the national laboratory.

Our calibrations on this unit are done using a Julabo Stirred Water Bath and a UKAS Accredited Laboratory Calibrated Lab Facility Tempmaster Reference Thermometer.

NB Check with your inspector if unsure if a Traceable Certificate meets your business requirements.