Heat Pump System Error Codes | Lakenheath, Ely & Newmarket

Skip to content Loading... Error CodesRoly2025-07-20T10:08:16+01:00 Get Our Help Now

Common Air Source Heat Pump Error Codes, Alarms and Messages

Heat pump error codes, alarms or messages are a sign that something is wrong. Below are an explanation for some common fault codes for NIBE, Panasonic, Daikin and LG air to water heat pumps. If you need help interpreting the error code or fixing your system then please give us call us on 07979 857857 or 07776 599447. We currently cover Ely, Haddenham, St. Ives, Huntingdon, Bluntisham, Cambridge, Lakenheath, Upwell, Ramsey, Newmarket, Sutton, Manea, Wicken, and surrounding villages.

IMPORTANT: These codes have been supplied for your information only. We recommend that all servicing and maintenance of your heat pump should be carried out by a qualified engineer, and only engineers who holds a current F-Gas qualification should work on systems with refrigerant pipe work interconnecting the indoor and outdoor units.

NIBE Air Source Heat Pump Error Codes

NIBE Alarm code 294, incompatible heat pump:

This alarm happens when the outdoor unit losses power for a couple of seconds. To clear the alarm, you will need to turn off the outdoor and indoor unit for a few mins (outdoor at the isolator), then turn on the outdoor unit followed by indoor unit power on.

NIBE Alarm code 220 EB101 (E:40), high pressure alarm:

This is a circulation issue.  It could be a blocked filter, air in the system, circulation pump not working, or a valve that isn’t working as it should be causing a restricted flow during hot water production or heating. A visit by a service engineer is required.

NIBE Error message: High Temp Condenser:

High condenser out/in is a B alarm. The system will reset itself and come up when Δ between flow and return. This is a flow issue in general will need to be looked at.

Panasonic Aquarea Air Source Heat Pump Error Codes

Panasonic Error H62 – Water flow switch abnormality:

This error usually indicates a low flow rate and may require remedial work. This error code may turn off the heat pump and the green light will flash on the control panel.

Daikin Air Source Heat Pump Error Codes

Daikin U0 –  Shortage of refrigerant:

This error is shown when there is a refrigerant shortage. An F-Gas engineer will need to attend to top up the refrigerant.

LG Altherma V Heat Pump Error Codes – CH14

CH14 error message on a LG Altherma V high temperature – split air source heat pump is usually due a flow rate issue. This could be something simple like isolating and cleaning the strainer, and or magnetic filter, or it could down to a more serious hydraulic issue such as a faulty circulation pump or valve.

If your heat pump is showing an error code which isn’t listed, please give us a call on 07979 857857 or 07776 599447 and we will help diagnose the issue with you, and if necessary, arrange a convenient time to come and fix the problem.

Page load link Manage Consent To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behaviour or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions. Functional Functional Always active The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network. Preferences Preferences The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user. Statistics Statistics The technical storage or access that is used exclusively for statistical purposes. The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you. Marketing Marketing The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes. Manage options Manage services Manage {vendor_count} vendors Read more about these purposes Accept Deny View preferences Save preferences View preferences {title} {title} {title} Manage consent Call Now Button Go to Top