HM-50 | Product Information | Yamaha Robotics Holdings.

• HOME
• Products
• HM-50

Search by Series

• SHINKAWA Series
• APIC YAMADA Series
• PFA Series
• Electronic component mounting equipment and mounters
• Industrial robots

Search by Application

• General Semiconductor
• Automobile
• Camera Modules
• Crystal Devices
• FPD

Search by Process

Semiconductor back-end process Manufacturing

• Die Bonders
• Bump Bonders
• Wire Bonder
• Flip Chip Bonders
• Other
• Molds
• Lead Processing
• Inspection

Crystal Device Manufacturing

• Blank Mounted
• Clean Curing Furnace
• Packing Masks
• Taping
• Glossy Leak
• Temperature Test
• Frequency Regulator
• Inspection

Camera module manufacturing

• Active Alignment
• ACF/FPC Mounting
• Holder Mounted
• Focus Adjustment
• Dispenser
• Lens Inserter

• Search by Series
• Search by Application
• Search by Process

Holder mounter HM-50Camera module manufacturing Holder Mount

Brand

PFA Series

Overview

• This machine applies glue to sensor board and then mounts lens holders on them.
• Accurate mounting beyond that of conventional devices is now possible using image processing compensation and optical linear scale and high spec camera.
• Machine has achieved clean Class 100

Features

• Linear scale and 2 million pixel camera are adopted for the mounting process axis, and high-precision mounting (±10μm) is realized.
• Equipped with a twin dispenser and a high-speed mount head, a standard tact of 1.7 seconds per piece (*) is achieved.*In case of optimum operating conditions: Need to discuss operating conditions
• Cleanliness class 100 is achieved even during operation through thorough clean-up measures. Contamination defects are reduced by the neutralization and dust removal functions of workpieces.
• It is also very simple to create coating and mounting data for new models.It supports three languages: Japanese, English, and Chinese.

Usage examples

This is the best device for VCM assembly that does not require active alignment.

Product Specifications

ITEM	DETAILS
Target sensor substrate	CCD/CMOS Sensor BoardSize: L=50~250mm, W=40~100mm
Object lens holder	□ 5 to 10 mm/tray supply (with/without lens barrel)
Dispenser for adhesive application	×2 units
Onboard head	×1 unit
Adhesive application accuracy	±35μm
Equipment Precision	±10μm
Output	UPH ≧ 1600
Imaging feature	CCD camera: 4 setsWork alignment, board direction determination, bad mark detection, application presence/absence detection, holder direction determination, etc.
Cleanliness inside the equipment	Class100

*Configuration and specifications of this machine are subject to partial modification without prior notice.

Installation dimensions

• 

Related Products

BM-series

Lens Inserter

CM-F Series

ACF/FPC Mounting

SOLUTION

SUPPORT

Contact Us

For products and various inquiries, click here.

List of inquiries