Hot-dip Galvanized Steel – Environment C5-M - Colgom

Trang chủ » C5-m » Hot-dip Galvanized Steel – Environment C5-M - Colgom

Có thể bạn quan tâm

Skip to content Hot-dip Galvanized Steel – Environment C5-M
  1. Home
  2. Hot-dip Galvanized Steel – Environment C5-M

ENVIRONMENT C5-M - HOT-DIP GALVANIZED STEEL

The environment that the ISO 12944-2 Standard identifies with the atmospheric corrosivity class C5-M, that is very high, typical of marine areas, concerns buildings or areas with almost permanent condensation and high pollution such as industrial plants, refineries, power plants and steel mills. Such structures are usually placed in coastal and offshore areas with high salinity.

The hot galvanized steel structures have a loss of mass from 30 to 60 g / m2 and from 4.2 to 8.4 µm of thickness.

DURABILITA' LOW

ISO 12944-5Paint SystemsCOLGOM ProductThickness μm
A7.13PRIMER ANCORANTE EPOSSIPOLIAMMIDICO BICOMPONENTEEPICOL PRIMER S.N.F.80
INTERMEDIO EPOSSIPOLIAMMIDICO BICOMPONENTEEPICOL T.P. TIE COAT150
SMALTO ACRILICO ADESIONE DIRETTA ACRYL ISOCOLGOM S.N.F. COAT90
A7.13PRIMER ANCORANTE EPOSSIPOLIAMMIDICO BICOMPONENTEEPICOL PRIMER S.N.F.80
INTERMEDIO EPOSSIPOLIAMMIDICO BICOMPONENTEEPICOL T.P. TIE COAT150
SMALTO POLIURETANICO ALIFATICO EXTRAISOCOLGOM ALIPHATIC EXTRA COAT90

DURABILITA' MEDIUM

ISO 12944-5Paint SystemsCOLGOM ProductThickness μm
A5M.01ANTIRUGGINE EPOSSIPOLIAMMIDICAEPICOL PRIMER150
INTERMEDIO EPOSSIPOLIAMMIDICOEPICOL TIE-COAT70
SMALTO EPOSSIPOLIAMMINICOEPICOL COAT80
A5M.03ANTIRUGGINE EPOSSIPOLIAMMIDICAEPICOL PRIMER400
A5M.05ZINCANTE ORGANICO EPOSSIPOLIAMMIDICO LEVEL 1EPICOL ZINK LEVEL 160
INTERMEDIO EPOSSIPOLIAMMIDICOEPICOL TIE-COAT100
SMALTO POLIURETANICO ALIFATICOISOCOLGOM ALIPHATIC COAT80
A5M.05ZINCANTE INORGANICO ETILSILICATO LEVEL 1COLSILICATE ZINK 8660
INTERMEDIO EPOSSIPOLIAMMIDICOEPICOL TIE-COAT100
SMALTO POLIURETANICO ALIFATICOISOCOLGOM ALIPHATIC COAT80
A5M.05ZINCANTE ORGANICO EPOSSIPOLIAMMIDICO LEVEL 1EPICOL ZINK LEVEL 160
INTERMEDIO EPOSSIPOLIAMMIDICOEPICOL TIE-COAT100
SMALTO EPOSSIPOLIAMMINICOEPICOL COAT80
A5M.05ZINCANTE INORGANICO ETILSILICATO LEVEL 1COLSILICATE ZINK 8660
INTERMEDIO EPOSSIPOLIAMMIDICOEPICOL TIE-COAT100
SMALTO EPOSSIPOLIAMMINICOEPICOL COAT80

DURABILITA' HIGH

ISO 12944-5Paint SystemsCOLGOM ProductThickness μm
A7.09SMALTO ACRILICO ADESIONE DIRETTA ACRYL ISOCOLGOM S.N.F. COAT80

Richiedi maggiori informazioni sui prodotti Colgom

SCOPRI DI PIU'

Từ khóa » C5-m