How To Boot Kyocera Torque G03 Recovery Mode

Trang chủ » Cách Reset Máy Kyocera G03 » How To Boot Kyocera Torque G03 Recovery Mode

Có thể bạn quan tâm

FacebookTwitterReddit

Want to Boot Kyocera Torque G03 into Recovery Mode? Then follow the instructions listed on this page to successfully Boot Kyocera Torque G03 to Recovery Mode.

Kyocera Torque G03 Recovery Mode allows the users to perform advanced operations like flashing Root Package and other zip mods, wipe user cache and data, and many more.

Here we have shared two methods which will help in booting Kyocera Torque G03 to Recovery.

Also: Kyocera Torque XT E6715 Recovery Mode and Fastboot Mode

Boot Kyocera Torque G03 into Recovery Mode

Below are the methods using which you can boot Kyocera Torque G03 into Recovery Mode.

Boot Kyocera Torque G03 Recovery Mode using Hardware Buttons

  1. Power off your phone.
  2. Once the device is off. Press and hold the Volume Down and Power button together for a few seconds.Kyocera Torque G03 Recovery Mode and Fastboot Mode
  3. Release the keys as soon as you see the Kyocera logo and wait for few seconds.
  4. Now, your phone should boot into Recovery Mode.Kyocera Torque G03 Recovery Mode and Fastboot Mode

Boot Kyocera Torque G03 into Recovery using ADB command

  1. First of all, make sure you have installed Kyocera Torque G03 USB Driver and ADB and Fastboot Drivers on your Windows PC.
  2. Enable "USB Debugging" on your phone from Developer Options. If Developer Options is missing; go to Settings > About Phone and tap on Build Number for about 7-10 times.
  3. Connect your device to PC and open Command Prompt (CMD).
  4. Enter the below command to boot Kyocera Torque G03 into Recovery Mode.adb reboot recovery
Related Tutorials

How to Factory Reset Kyocera Torque G03

Từ khóa » Cách Reset Máy Kyocera G03