HP Pavilion DV6 Disassembly (Remove Keyboard, Clean Cooling ...

Có thể bạn quan tâm

In this guide, I will explain how to disassemble the HP Pavilion DV6 to remove the RAM, hard drive, wireless card, keyboard, palm rest, cooling fan, and motherboard.

Turn off your laptop. Unlock and remove the battery.

Slide the service cover switch to the left to lift and remove the service cover.

After removing the service cover, you can access the hard drive, RAM, and wireless card.

Remove the RAM, hard drive, and DVD drive.

Disconnect the two antenna cables, remove the two screws, and then remove the wireless card.

Remove the screw securing the keyboard.

Flip and open the laptop. Insert a pry tool from the top of the keyboard under the keyboard, lift the keyboard, and place it on the palm rest. Then, disconnect the keyboard cable from the motherboard. Remove the keyboard

Remove the seven screws securing the palm rest and disconnect all the cables.

Remove all screws from the bottom cover.

Insert a plastic pry tool between the palm rest and the bottom cover. The palm rest has several clips that secure it to the bottom cover. Move the pry tool to release all the clips until the palm rest is completely detached from the laptop. Remove the palm rest