Hydrogen Production: Natural Gas Reforming | Department Of Energy
Có thể bạn quan tâm
Official websites use .gov A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS A lock ( Lock Locked padlock ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Breadcrumb
- Hydrogen and Fuel Cell Technologies Office
- Hydrogen Production
- Processes
- Hydrogen Production: Natural Gas Reforming
Natural gas reforming is an advanced and mature production process that builds upon the existing natural gas pipeline delivery infrastructure. Today, 95% of the hydrogen produced in the United States is made by natural gas reforming in large central plants. This is an important technology pathway for near-term hydrogen production.
How Does It Work?
Natural gas contains methane (CH4) that can be used to produce hydrogen with thermal processes, such as steam-methane reformation and partial oxidation.
Although today most hydrogen is produced from natural gas, the Hydrogen and Fuel Cell Technologies Office is exploring a variety of ways to produce hydrogen from renewable resources.
Steam-Methane Reforming
Most hydrogen produced today in the United States is made via steam-methane reforming, a mature production process in which high-temperature steam (700°C–1,000°C) is used to produce hydrogen from a methane source, such as natural gas. In steam-methane reforming, methane reacts with steam under 3–25 bar pressure (1 bar = 14.5 psi) in the presence of a catalyst to produce hydrogen, carbon monoxide, and a relatively small amount of carbon dioxide. Steam reforming is endothermic—that is, heat must be supplied to the process for the reaction to proceed.
Subsequently, in what is called the "water-gas shift reaction," the carbon monoxide and steam are reacted using a catalyst to produce carbon dioxide and more hydrogen. In a final process step called "pressure-swing adsorption," carbon dioxide and other impurities are removed from the gas stream, leaving essentially pure hydrogen. Steam reforming can also be used to produce hydrogen from other fuels, such as ethanol, propane, or even gasoline.
Steam-methane reforming reactionCH4 + H2O (+ heat) → CO + 3H2
Water-gas shift reactionCO + H2O → CO2 + H2 (+ small amount of heat)
Partial Oxidation
In partial oxidation, the methane and other hydrocarbons in natural gas react with a limited amount of oxygen (typically from air) that is not enough to completely oxidize the hydrocarbons to carbon dioxide and water. With less than the stoichiometric amount of oxygen available, the reaction products contain primarily hydrogen and carbon monoxide (and nitrogen, if the reaction is carried out with air rather than pure oxygen), and a relatively small amount of carbon dioxide and other compounds. Subsequently, in a water-gas shift reaction, the carbon monoxide reacts with water to form carbon dioxide and more hydrogen.
Partial oxidation is an exothermic process—it gives off heat. The process is, typically, much faster than steam reforming and requires a smaller reactor vessel. As can be seen in chemical reactions of partial oxidation, this process initially produces less hydrogen per unit of the input fuel than is obtained by steam reforming of the same fuel.
Partial oxidation of methane reactionCH4 + ½O2 → CO + 2H2 (+ heat)
Water-gas shift reactionCO + H2O → CO2 + H2 (+ small amount of heat)
Why Is This Pathway Being Considered?
Reforming low-cost natural gas can provide hydrogen today for fuel cell electric vehicles (FCEVs) as well as other applications. Over the long term, DOE expects that hydrogen production from natural gas will be augmented with production from renewable, nuclear, coal (with carbon capture and storage), and other low-carbon, domestic energy resources.
Petroleum use and emissions are lower than for gasoline-powered internal combustion engine vehicles. The only product from an FCEV tailpipe is water vapor but even with the upstream process of producing hydrogen from natural gas as well as delivering and storing it for use in FCEVs, the total greenhouse gas emissions are cut in half and petroleum is reduced over 90% compared to today's gasoline vehicles.
For more information, see Hydrogen Strategy: Enabling a Low-Carbon Economy from the U.S. Department of Energy Office of Fossil Energy and Carbon Management.
Từ khóa » Ch4 1000c
-
High-resolution Laboratory Emission Spectra Of CH4 At 1000°C For All...
-
What Happens When Methane Is Heated At 1000^@C In Absence Of ...
-
What Happens When Methane Is Heat At 1000 ^(@) C ? - Doubtnut
-
I. Pure Systems From 0 To 1000°C And 0 To 8000 Bar - ScienceDirect
-
An Equation Of State For The CH4-CO2-H2O System: II. Mixtures From ...
-
Methane - Density And Specific Weight Vs. Temperature And Pressure
-
Methane Gas - Specific Heat Vs. Temperature
-
Airtorch Applications - MHI Inc
-
The Combustion Of Methane At High Temperatures - JSTOR
-
Methane When Heated At 1000∘C In Absence Of Air, Decomposes ...
-
Direct Methane Conversion Under Mild Condition By Thermo ...
-
[PDF] Catalytic Hydrogen Production From Methane: A Review On Recent ...
-
Sub-oxycline Methane Oxidation Can Fully Uptake CH4 Produced In ...