Oils for the lubrication of bearings, hydraulics, slideways and gears. Classification: ISO-L-HM. Meet the requirements of the standards: DIN 51524-Part 2 HLP / DIN 51517-Part 3 CLP.
ULTRA ATOX
32 46 68 100 150 220 320 460
32 46 68 100 150 220 320 460
White oils with additives for the lubrication of bearings, hydraulics, slideways, gears, circulation systems and compressors. Meet the requirements of the standards: ISO 6743/4-HM. DIN 51524-Part 2 HLP. DIN 51517-Part 3 CLP. DIN 51506-VD-L. Certified by NSF as H1 – suitable for accidental food contact.
ULTRASYNT ATOX
32 46 68 100 150 220 320 460 680
32 46 68 100 150 220 320 460 680
Synthetic oils for long lasting high-performance lubrication for bearings, hydraulic systems, pumps, chains, gears and compressors. These oils exceed the requirements of standards ISO 6743/4 - HM. DIN 51524 - Part 2 HLP - DIN 51517 - Part 3 CLP - DIN 51506 -VD-L. Certified by NSF as H1 – suitable for accidental food contact.
ULTRA VBA
46 68
46 / 68
Multifunctional lubricants with Vegetable-based bases, suitable for incidental food contact (NSF H1), totally free of hydrocarbons and biodegradable. Specials as hydraulics for vegetable oil mills. Quality level DIN 51524 Part 2 HLP / DIN 51517 Part 3 CLP.
ULTRATEF
H1
100
Multifunctional oil with PTFE for lubrication of open mechanisms in the food industry. NSF approved as H1 for accidental food contact.
ULTRA BIO
100
100
Recommended for the lubrication of industrial gears, bearings, guides, chains, hydraulic circuits, pumps and circulation lubrication, in case of possible discharge of the lubricant into the environment.
GENERAL LUBRICANTS
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
ENGINE OIL
7 12
100 150
General lubricant for machinery and mechanisms bearing moderateloads at moderate speeds. Have high oiliness and thermal stability.
SPECIAL LUBRICANTS
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
ULTRA SP 2
2
Lubrication of high speed spindles operating at extremely close tolerances (“zero clearance”).
ULTRA CS 200 H1
200
It is especially formulated for the lubrication of high-speed canning machine mechanisms. Due to its high stability and minimal residue formation, it ensures correct lubrication under the most demanding operating conditions. Applicable in machinery that presents a risk of contamination of the product with the lubricant.
GEARS OILS
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
STANDARD VAREN EP
100 150 220 320 460 680 1000
100 150 220 320 460 680 1000
Lubrication of industrial gearboxes. Meet the requirements of the standards: DIN 51 517 Part 3-CLP/ US STEEL 224 / AGMA 9005-D94.
ULTRAGEAR EP
150 220 320 460 680
150 220 320 460 680
Oils with mineral base for gears operating in heavy duty load conditions. High protection against micropitting. They are approved by Siemens MD for use in Flender gears.
BIODEGRADABLE GEARS OILS
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
ULTRAGEAR BIO
460
460
Lubrication of industrial gears, bearings, slide ways, cams and other mechanisms requiring oil with EP properties, where there is a possibility of lubricant waste to the environment.
GEAR OILS FOR THE PRINTING INDUSTRY
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
ULTRAPRESS AG
5 LA 68 LA
68/68
Gear oils specially formulated to meet the requirements of printing machine manufacturers (MANROLAND, etc).
SYNTHETIC GEAR OILS
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
ULTRAGEAR PG
100 150 220 320 460
100 150 220 320 460
Synthetic lubricants with high thermal stability and great lubricating power. For long life lubrication of all types of gears, circulation systems, bearings at high temperature (up to 200ºC).
ULTRASYNT EP
150 220 320 460 680 1000
150 220 320 460 680 1000
Polyalphaolefin-based synthetic gear oils operating under severe load and temperature conditions. Approved by Siemens MD for use in Flender gears.
ULTRASYNT FGT
150
150
Special synthetic oil for lubrication of bearings and gears under high loads in the food, beverage, pharmacy and cosmetic industries. Low coefficient of friction. Complies with standards: ISO 12925 - CKB, CKC, CKD / DIN 51517 Parts 1, 2 and 3 - C, CL and CLP. NSF certified as H1 - suitable for accidental food contact.
ULTRASYNT WG
1000
1000
Is particularly suitable for the long-term lubrication of worm gears. Can be used in circulation systems for lubrication of plain and roller bearings and other mechanical components, especially at high temperatures.
SLIDEWAYS AND DRIP-FREE
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
STANDARD SLIP
68 100 150 220 320 1000
68 100 150 220 320 1000
Special oils for the lubrication of horizontal and vertical slideways and drip-free general lubrication.These oils contain unctuosity, adherence and extreme pressure (E.P.) additives. Quality level ISO 6743/4-L-HG / DIN 51524 - Part 2 - HLP / DIN 51517 - Part 3 - CLP.
CHAINS OILS
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
ULTRACHAIN HT
220 320
220 320
Synthetic lubricants for chains operating at temperatures up to 250ºC. High lubricating power. Residue-free.
ULTRACHAIN PRO
150 270 460
150 270 460
Oils with synthetic bases for chains with working temperatures of 200-220ºC. Great stability to oxidation and residue formation.
ULTRA CLT
320
320
Synthetic lubricant for chains operating from -30 up to 120ºC. Resistant to moisture, water and steam. High adherence. Chains, cables, cams, open mechanisms.
STANDARD SINT
15
15
Biodegradable ester based synthetic chain oil. Operating temperature from -50 up to +180ºC. Suitable for operation in dusty conditions and where environment contamination is possible.
STANDARD CLT
460
460
Mineral oil for chains and slide ways working up to +150ºC with high loads and moisture. Quality level ISO 6743/4 – category L-HG / DIN 51517 – CLP
ULTRACHAIN CPO
270
270
Ester based synthetic oil for chain lubrication with operating temperature up to +250ºC. Compatible with some paints used in cataphoresis.
ULTRACHAIN FG
220
220
Ester based synthetic oil for chain lubrication with operating temperature up to +250ºC. Certified by NSF as H1 – suitable for accidental food contact.
ULTRADRY
320
320
Dispersion of micronized graphite in a synthetic fluid for the lubrication of chains, bearings, sliding surfaces, support rings, etc. at temperatures up to 450ºC (600ºC with sufficient relubrication).
ULTRACHAIN CTP 145
135
Special synthetic oil for lubricating chains in overhead and ground conveyors of cataphoretic paint lines. ULTRACHAIN CTP 145 is compatible with most water soluble paints and prevents the formation of craters, "fish eyes" and other surface defects. Working temperature up to 200ºC.
ULTRACHAIN HT 250 SX
250
Synthetic ester-based oil designed for the lubrication of chains, belts and other points working at temperatures of +250 ºC, even higher with proper relubrication. High residue re-dissolving capacity. Specially developed for the lubrication of steel belts, roller conveyors and roller bar chains in continuous board presses of Siempelkamp, Dieffenbacher and Metso-Küsters.
COMPRESSORS AND PUMPS
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
STANDARD CP
46 68 100 150
46 68 100 150
Mineral oils for air compressors with specific additives. High stability to oxidation, preventing the formation of deposits. Comply with the standard DIN 51 506. Category VD-L.
STICK PRESS AG
23
320
Special oil for vacuum and pressure pumps in the Printing Industry. Complies with standard DIN 51 506 / VB-L / VC-L / VD-L.
STANDARD FRI
68
68
Mineral naphthenic oil for the lubrication of refrigerating compressors of ammonia, freons R12 and R22, and propane-butane. Complies with DIN 51503 KAA/KC/KE.
ULTRABAR HC
46
46
Special hydrocarbon based oils for lubricating screw and vane compressors under severe operating conditions. Quality level: ISO 6743/3 - DAH / DIN 51 506 - VD-L.
ULTRABAR HS
46 68
46 / 68
PAO synthetic base oils for long-term lubrication of screw and vane compressors under severe operating conditions. Quality level: ISO 6743/3 - DAJ / DIN 51 506 - VD-L.
NEBULIZABLE OILS
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
NEBULOIL
2
22
Highly refined oil with special additives for optimum pulverization.
SPECIAL HYDRAULICS FOR INDUSTRY
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
PRESOL HM
32 46 68 100 150
32 46 68 100 150
High performance hydraulic oils with anti-wear, corrosion protection, anti-oxydation and anti-foam additives. Demulsifying. Meet DIN 51 524 Part 2 standard and equivalent.
PRESOL TH EP
3 4 5 8
32 46 68 100
High performance hydraulic oils with anti-wear, corrosion protection, anti-oxydation and anti-foam additives. Demulsifying, ash-free, red colour. Meet DIN 51 524 Part 2 standard and equivalent.
PRESOL HV
15 32 46 68 100
15 32 46 68 100
High performance hydraulic oils featuring high viscosity index, with anti-wear, corrosion protection, anti-oxydation and anti-foam additives. Demulsifying. Meet DIN 51 524 Part 3 standard and equivalent.
PRESOL HV PLUS
22 46 68
22 46 68
Refined and microfiltered hydraulic oil, specially formulated for use in systems subject to large temperature variations, due to its very high viscosity index, and where special anti-wear and extreme pressure characteristics are required, great resistance to corrosion and stability to oxidation. Complies with specifications: ISO 6074 (HV) DIN 51524, Part 2 and 3 (HVI) MIL-L-24459.
PRESOL HFC
40
46
Fire resistant water-glycol type hydraulic fluid, featuring red colour and high lubrication and stability.
ULTRAPRESS SC HM
46 68
46 68
High performance hydraulic oils with anti-wear, corrosion protection, anti-oxydation and anti-foam additives. Demulsifying, ash-free. Meet DIN 51 524 Part 2 standard and equivalent.
ULTRAPRESS SC HV
46 68
46 68
Highly refined and micro-filtered hydraulic oil, for use in systems exposed to wide temperature variation, and where requirements of anti-wear capacity, oxidation and corrosion protection are demanding. The product is ashless and free from heavy metals, it has low foam tendency and good deairation and demulsifying capacity.
ULTRAPRESS SCD
46
46
High performance hydraulic oil with anti-wear, corrosion protection, anti-oxydation and anti-foam additives. Detergent, ash-free. Meets DIN 51 524 Part 2 standard and equivalent.
ULTRAPRESS SCD HV
46
46
Extreme pressure hydraulic oil, ash-free and with great detergent power. Paraffinic base with protection against oxidation and corrosion, as well as wear reduction. Meets ISO 6743/4: HV; DIN 51.524, Part 3 (HVLPD) and DIN 51.517, Part 3 (CLP).
PRESOL HE FR
46 68
46 68
Biodegradable fire resistant hydraulic fluid. is based on a high flash point biodegradable TMP ester and additives.
ULTRAPRESS HEES
46 150
46 150
Recommended for hydraulic equipment operating in conditions where there may be a risk of incidental spillage or contamination of the environment, such as wind installations, hydroelectric plants, ports, ski resorts, etc. It is also suitable as a fire resistant hydraulic fluid. Working temperatures: from -30 ºC to 90 ºC (with point peaks of +120 ºC).
ULTRAPRESS SC 46 SL
46
46
Refined and "ashless" microfiltered hydraulic oil for systems where oils with high degrees of cleanliness, anti-wear characteristics, oxidation stability and corrosion resistance are required.
ULTRAPRESS SC 46 KM
46
46
Refined and "ashless" microfiltered hydraulic oil for systems where oils with high degrees of cleanliness, anti-wear characteristics, good air separation behaviour, oxidation stability and corrosion resistance are required.
TECHNICAL OIL
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
SIVANO
1 6
22 1
Technical oils for use as plasticizers and auxiliaries in chemical formulations.
WHITE SI
220
Silicone oil with high thermal stability for the lubrication of mechanisms at temperatures from -30 to 200ºC, and as an auxiliary in spinning.
MEDICINAL OILS
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
FARMOL
22 33 55
15 32 68
Medicinal-grade white oils suitable as lubricants and auxiliary products in food processing, cosmetics and pharmaceuticals, etc. DAB 10 and FDA 178.3620 (a) quality level. Certified by NSF as 3H - suitable for direct contact with food.
FARMOL NL
22
White medicinal oil with the same uses as Farmol 22 but not classified as dangerous by aspiration, thanks to its viscosity greater than 20.5 mm2/s.
ULTRAFARM
40
40
Medicinal white oil stabilized with antioxidant, special for dough dividers in bread industry, as a release agent and auxiliary product. Quality level FDA 178.3620 (a), FDA 172.878. Certified by NSF as 3H - suitable for direct contact with food.
ULTRAFARM
VDP-E
32
Vegetable oil with additives, especially for divider-weighers in industrial bakeries. High resistance to heat and oxidation. Certified by NSF as 3H - suitable for direct contact with food.
ULTRASIL CUT
300
1
Food grade emulsion of silicone for lubrication and refrigeration in low severity metalworking operations.
WHITE OIL FILANTE
-
Solid petroleum jelly of medicinal quality indicated for cosmetic and medicinal uses, and as a lubricant in the food industry. DAB 10 and FDA 178.3620 (a) quality level.
HEAT TRANSFER FLUIDS
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
ACEITE TERMICO
3
22
Synthetic thermal fluid for closed circuits. Operating temperature from -20 to + 315ºC.
ULTRATERMIC P
6
32
Synthetic based thermal fluid for closed circuits where a food grade product is required. Working temperature up to 315ºC. NSF H1 and HT1 certifications.
SPECIAL OILS
Product
ISO VG Viscosity (CST at 40° C)
Description and applications
ULTRA PFPE
150 220 460
150 / 220 / 460
Synthetic oils with perfluoropolyether base for Lubrication in extreme conditions, presence of aggressive chemical products, high temperatures and lubrication for life.
ULTRASYNT PG
68
68
Synthetic oil auxiliary lubricant in manufacturing processes of copper and aluminium wires.
ULTRASYNT IF
40
32
Special synthetic oil for lubricating sintered bearings. Very wide working temperature range: -60 to + 150ºC.
This website uses cookies to provide you with the best user experience. If you continue to browse you are consenting to the acceptance of these cookies and the acceptance of our cookie policy.Read moreACCEPTCookie optionsPrivacy & Cookies PolicyClose
Privacy overview
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience. Necessary Necessary Always Enabled
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Non-necessary Non-necessary
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
