IPhone 13 Pro Max Lidar Sensor Replacement - IFixit Repair Guide

Skip to main content Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

iPhone 13 Pro Max Lidar Sensor Replacement

Introduction

Follow this guide to replace the lidar sensor on an iPhone 13 Pro Max.

What you need

1. Step 1 Remove the pentalobe screws

   

   • Caution: Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

   • Power off your iPhone before beginning disassembly.

   • Remove the two 6.8 mm-long pentalobe P2 screws at the bottom edge of the iPhone.

   • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

   Edit 3 comments