Is N Mm2 Same As Kg Cm2?

Is N mm2 same as kg cm2?

A pressure measured in newtons per square millimetre is converted into kilograms per square centimetre as follows: 1 kg/cm² = 98066.5 pascals (Pa) 1 N/mm² = 1 MPa = 1000000 pascals (Pa) kg/cm² value x 98066.5 Pa = N/mm² value x 1000000 Pa.

What is N mm2 in KG?

1N/mm2 (newtons per square millimetre) = 10.1972… kg/cm2 (kilogrammes force per square centimetre). Please use this force per unit area converter for other N/mm² to kg/cm² conversions.

How many mm2 are in cm2?

mm2↔cm2 1 cm2 = 100 mm2.

How do you convert kg square cm to N mm2?

A pressure measured in kilograms per square centimetre is converted into newtons per square millimetre as follows:

1. 1 N/mm² = 1 MPa = 1000000 pascals (Pa)
2. 1 kg/cm² = 98066.5 pascals (Pa)
3. N/mm² value x 1000000 Pa = kg/cm² value x 98066.5 Pa.
4. N/mm² value = kg/cm² value x 0.0980665.

What does N mm2 mean?

It should be written as N/mm² , it means Newton per square millimetre, and it is usually used as a unit for stress. It can also be written as MPa, MegaPascal, but as N/mm² it can be envisioned a bit more. Normal steel has a breaking strength of about 420 N/mm², as an example.

How do you convert n mm to kg cm?

ENDMEMO

1. N/mm = 1.019716 kgf/cm.
2. N/mm = 2.039432 kgf/cm.
3. N/mm = 3.059149 kgf/cm.
4. N/mm = 4.078865 kgf/cm.
5. N/mm = 5.098581 kgf/cm.
6. N/mm = 6.118297 kgf/cm.
7. N/mm = 7.138013 kgf/cm.
8. N/mm = 8.15773 kgf/cm.

How do you convert mm2 to cm2?

The conversion factor is 0.01; so 1 square milimeter = 0.01 square centimeters. In other words, the value in mm2 divide by 100 to get a value in cm2.

How do you convert cm squared to mm squared?

Square Centimeters to Square Millimeters Conversions There are 100 square millimeters in 1 square centimeter. To convert from square centimeters to square millimeters, multiply your figure by 100 (or divide by 0.01) .

How do you convert cm2 to mm2?

How do you convert n To kg cm2?

What is conversion from 1 N/cm² to kg/cm²? 1N/cm2 (newtons per square centimetre) = 0.101972 kg/cm2 (kilograms force per square centimetre).

What is N mm2 in tensile strength?

Tensile strength Rm [N/mm2] Determines how much axial load a screw must withstand without breaking. If full size screws are tested, the yield strength can only be approximately established. Under ISO 898 Part 1, the exact yield strength and elongation after fracture can be determined using machined specimens.

Continue Reading

Previous What was the result of war of independence in 1857 AD?Next How old is Koutoubia?