JH Joist Hangers - MiTek New Zealand

LUMBERLOK TIMBER CONNECTORS

Joist Hangers

Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90˚, e.g. truss/joist to beam, or rafter to bearer connection. Joist Hanger 47 x 90 Designed for use where gauged timber of 47mm width and up to 150mm deep. Joist Hanger 47 x 120 Multi-use bracket suitable for gauged 47mm thick timber up to 200mm deep. Joist Hanger 47 x 190 Used for gauged 47mm thick timber up to 300mm deep. Joist Hanger 70 x 180 A special size joist hanger designed for gauged 69mm wide timbers. Joist Hanger 95 x 165 For use on gauged 94mm wide timber or double joists/trusses. Note: Joist Hangers 52mm wide also available for rough sawn timber. All of the above Joist Hanger connections should be fixed using LUMBERLOK Product Nails 30mm x 3.15mm diameter, or Type 17-12g x 35mm Hex Head Screws. Also available in Stainless Steel 304. Refer below for Product Data and Installation. Materials: 0.91mm G300 Z275 Steel Finish: Zinc Coated

Resources

Services

Technical Bulletins

• Joist Hangers product brochure

Installation

• Refer to the product brochure.

Need Help or Have a Question? Contact Customer Service

3-View Product Drawings

MiTek Stock #	Download or View Files
JH47120	DWG	DXF
JH47120DG	DWG	DXF	PDF	View Image
JH47190	DWG	DXF	PDF	View Image
JH47190DG	DWG	DXF
JH4790	DWG	DXF	PDF	View Image
JH4790DG	DWG	DXF
JH52120	DWG	DXF	PDF	View Image
JH52120DG	DWG	DXF
JH52190	DWG	DXF
JH52190DG	DWG	DXF
JH5290	DWG	DXF	PDF	View Image
JH5290DG	DWG	DXF
JH70	DWG	DXF
JH70DG	DWG	DXF
JH95	DWG	DXF
JH95DG	DWG	DXF
Joist Hanger Range	DWG	DXF

Opens in a new window Opens an external site Opens an external site in a new window