Kia Sportage: Brake System / Hill-start Assist Control (HAC)

Trang chủ » Hac Kia » Kia Sportage: Brake System / Hill-start Assist Control (HAC)

Có thể bạn quan tâm

Kia Sportage: Brake system / Hill-start assist control (HAC) Kia Sportage QL (2015-2026) Owners Manual / Driving your vehicle / Brake system / Hill-start assist control (HAC)

A vehicle has the tendency to roll back on a steep hill when it starts to go after stopping. The Hill-start Assist Control (HAC) prevents the vehicle from rolling back by applying the brakes automatically for about 2 seconds. The brakes are released when the accelerator pedal is depressed or after about 2 seconds.

The HAC is activated only for about 2 seconds, so when the vehicle is starting off always depress the accelerator pedal.

WARNING - Maintaining Brake Pressure on Incline

HAC does not replace the need to apply brakes while stopped on an incline. While stopped, make sure you maintain brake pressure sufficient to prevent your vehicle from rolling backward and causing an accident. Don’t release the brake pedal until you are ready to accelerate forward.

Malfunction indicator
The VSM can be deactivated even if you don’t cancel the VSM operation by pressing the ESC OFF button. It indicates that a malfunction has been detected somewhere in the Electric Power Steering s ...

Good braking practices
Check to be sure the parking brake is not engaged and the parking brake indicator light is out before driving away. Driving through water may get the brakes wet. They can also get wet when ...

Other information:

Kia Sportage QL (2015-2026) Service Manual: Rear Shock Absorber Repair procedures

Removal 1. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...

Kia Sportage QL (2015-2026) Service Manual: Multimedia Jack Repair procedures

Removal Multimedia Jack Put on gloves to protect your hands. • When prying with a flat-tip scre ...

Từ khóa » Hac Kia