KonicaMinolta C658 Error Codes

Trang chủ » C0211 Bizhub » KonicaMinolta C658 Error Codes

Có thể bạn quan tâm

Search Error Codes
  • Manufacturers
    • Brother
    • Canon
    • Duplo
    • Epson
    • HP
    • KIP
    • Konica
    • Konica-Minolta
    • Kyocera
    • Lexmark
    • Mimaki
    • Minolta
    • Mutoh
    • OKI
    • Panasonic
    • Ricoh
    • Riso
    • Roland
    • Samsung
    • Sanyo
    • Sharp
    • Toshiba
    • Xerox
    • Zebra
  • Other Tools
    • Scan To Email Tester
    • Auto Installer
  • Contact
  • Go Back

KonicaMinolta C658 Error Codes

List Of Machines Search All Codes

Konica-Minolta C658 Error Code C0211

Error Code: C0211
Description: Manual feed up/down abnormality. • Paper is not turned OFF (unblock) the bypass lift-up position sensor (PS26) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at li
Causes: • Transport motor (M1) • Bypass pick-up solenoid (SD1) • Bypass lift-up position sensor (PS26) • MFP board (MFPB)
Remedy: 1. Check the connector between M1-MFPB CN8E for proper connection and correct as necessary. 2. Check the connector of M1 for proper drive coupling and correct as necessary. 3. Check the connector between PS26-relay CN19-MFPB CN18E for proper conn
Previous Page 1 83 84 85 247 Next❯

Konica-Minolta C658 Top Searches

These results are ranked by popularity.

Error
C1114Description: Center-staple front adjust drive motor malfunction (When FS-534SD is installed) The alignment home sensor (PS4) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the alignment motor (M3) is tur
CD701, CD702, CD703Description: • CD701: Mechanical controller flash ROM writing error • CD702: Mechanical controller flash ROM device error • CD703: FW download communication fault. CD701: A mechanical controller flash ROM writing sequence is interrupted in its mid-operat
93-10Description: The ADU paper passage sensor/2 (PS41) is not turned ON (blocked) even after the set period of time has elapsed after the ADU paper passage sensor/1 (PS40) is turned ON (unblocked) by the paper.
CC213Description: User registration error/Card information setting error. • IC card advanced settings data is not correct when starting-up the authentication device. • Authentication information data is not correct when starting-up the authentication device.
66-11Description: The document registration sensor (PS3) is not turned OFF (blocked) after the set period of time after PS3 is turned ON (unblocked) after the switchback registration started.

Konica-Minolta C658 Common Errors

The most common error codes.

Error
C1114Description: Center-staple front adjust drive motor malfunction (When FS-534SD is installed) The alignment home sensor (PS4) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the alignment motor (M3) is tur
CD701, CD702, CD703Description: • CD701: Mechanical controller flash ROM writing error • CD702: Mechanical controller flash ROM device error • CD703: FW download communication fault. CD701: A mechanical controller flash ROM writing sequence is interrupted in its mid-operat
93-10Description: The ADU paper passage sensor/2 (PS41) is not turned ON (blocked) even after the set period of time has elapsed after the ADU paper passage sensor/1 (PS40) is turned ON (unblocked) by the paper.
CC213Description: User registration error/Card information setting error. • IC card advanced settings data is not correct when starting-up the authentication device. • Authentication information data is not correct when starting-up the authentication device.
66-11Description: The document registration sensor (PS3) is not turned OFF (blocked) after the set period of time after PS3 is turned ON (unblocked) after the switchback registration started.
C2A11, C2A12Description: • C2A11: Drum unit/C new release failure • C2A12: Drum unit/M new release failure. The status with the new unit is not cleared after the new drum unit is set.
C1114Description: Center-staple front adjust drive motor malfunction (When FS-534SD is installed) The alignment home sensor (PS4) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the alignment motor (M3) is tur
CD701, CD702, CD703Description: • CD701: Mechanical controller flash ROM writing error • CD702: Mechanical controller flash ROM device error • CD703: FW download communication fault. CD701: A mechanical controller flash ROM writing sequence is interrupted in its mid-operat
93-10Description: The ADU paper passage sensor/2 (PS41) is not turned ON (blocked) even after the set period of time has elapsed after the ADU paper passage sensor/1 (PS40) is turned ON (unblocked) by the paper.
CC213Description: User registration error/Card information setting error. • IC card advanced settings data is not correct when starting-up the authentication device. • Authentication information data is not correct when starting-up the authentication device.

Từ khóa » C0211 Bizhub