LDO Motors Voron 2.4 350 Kit - 3DJake UK

Print your own 3D printer!

Are you looking for an exciting 3D printing project and want to put your manual skills to the test? Then the Voron 2.4 3D printer kit is just right for you!

The kit contains many high-quality parts, the rest is up to you. Print the missing parts and create your own FDM printer.

This kit is ideal for advanced hobbyists who already have a 3D printer at home and want to delve deeper into the various components. It is recommended to use ABS filament to print the required parts.

Here you can see which parts of your printer you have to print yourself.

About the Voron 2.4

The Voron 2.4 is a well designed open source CoreXY 3D printer known for its reliability, stunning looks and high performance.

With 4 independently controlled Z motors, it is possible, for example, to align the gantry parallel to the printing platform before printing.

The LDO Voron 2.4 kit is available in 2 variants, which only differ in the size of the build space:

• Voron 2.4 300 kit →300x300x300mm
• Voron 2.4 350 kit → 350x350x350mm

Click here for the 300 x 300 x 300 mm version of the Voron 2.4.

► Important note: The LDO kit does not contain a hotend or Raspberry Pi. These components must be purchased separately

► Important note: The components included in the set are designed for use with the Stealthburner printhead. You will also find corresponding designs for your desired hotend in the STL collection. More detailed information on using the Stealthburner printhead can be found here. Under the following links you will find the assembly instructions, firmware, STL files for the mounts of the compatible hotends and much more for the printhead you have selected:

• Stealthburner

Stable performance

All Voron printers are built with CoreXY or CoreXZ configurations to reduce the amount of mass to be moved and allow for greater acceleration and speed.

Download Fusion 360 and get a free license to view the 3D model of the printer. The 3D model is a very useful reference when the manual is ambiguous or unclear.

Once you have finished building your Voron 3D printer, you will receive a serial number here.

Here you will find further important information and instructions:

Assembly instructions

Printed Parts Guide

Cable chain guide

Wiring Guide

GitHub Voron 2.4

Features of the Voron 2.4 Kit by LDO

Coloured aluminium extrusion profiles

You can choose the colour of the aluminium extrusion profiles yourself when you buy them. Several colour variants are available.

Genuine Bondtech Dual Drive Gear Kit

The Bondtech Dual-Drive Gear Kit made of hardened and surface-protected steel has been precisely CNC-milled and ensures maximum filament grip and even extrusion. It is extremely wear-resistant and is therefore ideal for processing abrasive filaments.

Nevermore filters

In the kit, you will find the optional Nevermore Micro V5 internal circulation filter (charcoal pellets not included due to shipping restrictions).

BIGTREETECH Octopus V1.1 motherboard

The Octopus V1.1 mainboard from BIGTREETECH has numerous interfaces and ensures good performance.

Stainless steel linear rails

The stainless steel linear rails do not rust and impress with their durability. If you want to grease the rails you can do that at the end of your build.

Tool head PCB

The kit includes a modified Hartk tool head PCB. A tool head breakout PCB has also been designed to make wiring on the controller side simple and straightforward.

Brass threaded insert application tool

A specially machined brass tip is included for your soldering iron, allowing you to easily install heatset tips. Learn more about the Heatset Insert Tool here.

Pre-cut and pre-wired cables

The kit includes all the cables required, cut to the correct length and pre-crimped or soldered to the appropriate parts. You can find the supplementary wiring instructions here.

Two types of nuts

Both Black Oxide Hex Nuts and Stainless Steel Square Nuts are included in the kit, use whichever type you prefer.

Input shaper tool

The toolkit contains all the necessary parts to help you easily perform Input Shaper calibration.

Several Allen keys

Since 1.5mm Allen keys wear out easily, you will find several of them in the kit. However, you should definitely buy a set of good quality hex wrenches.

2 mm bits

Metric bits may not be very common in some parts of the world so one has been included with the kit. Use it to ream the filament path in your printed extruder parts.