The Massey Ferguson GC2300 is a 4WD sub-compact utility tractor from the GC series. This tractor was manufactured by Iseki for Massey Ferguson from 2005 to 2008. The Massey Ferguson GC2300 is equipped with a 1.1 L (68.5 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (2-range) forward and reverse gears.
The MF GC2300 sub-compact utility tractor used the Iseki engine. It is a 1.1 L, 1,123 cm2, (68.5 cu·in) three-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. This engine produced 22.8 PS (16.8 kW; 22.5 HP) at 2,600 rpm of output power.
The Massey Ferguson GC2300 is equipped with hydrostatic power steering, wet disc type brakes, two-post ROPS, and 20.8 liters (5.5 US gal.; 4.6 Imp. gal) fuel tank.
Following attachments are available for the MF GC2300 sub-compact utility tractor:
Mid-mount Massey Ferguson 2320 54 in (1,370 mm) mower deck with 3-blades
Mid-mount Massey Ferguson 2325 60 in (1,520 mm) mower deck with 3-blades
Front-mount Massey Ferguson 2335 54 in (1,370 mm) blade
Front-mount Massey Ferguson 2340 60 in (1,520 mm) blade
Front-mount Massey Ferguson 2360 50 in (1,270 mm) two-stage snowblower with hydraulic lift
Massey Ferguson 2350 loader
Massey Ferguson GC2300 Specifications
General Specifications
Model
Massey Ferguson GC2300
Length
2,480 mm (97.6 in)
Width
1,165 mm (45.9 in)
Height
1,840 mm (72.4 in)
Wheel base
1,450 mm (57.1 in)
Ground clearance
170 mm (6.7 in)
Weight
620 kg (1,367 lbs)
Fuel tank capacity
20.8 liters (5.5 US gal.; 4.6 Imp. gal)
Battery
12V
Cabin type
Two-post folding ROPS
Engine
Engine model
Iseki
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
3
Fuel type
Diesel
Displacement
1.1 L, 1,123 cm2, (68.5 cu·in)
Bore and stroke
78.0 mm X 78.0 mm (3.07 in X 3.07 in)
Horsepower
22.8 PS (16.8 kW; 22.5 HP) at 2,600 rpm
Starter
Electric
Transmission and chassis
Chassis
4×4 MFWD 4WD
Steering type
Hydrostatic power
Brakes
Wet disc type
Transmission model
–
Transmission type
Hydrostatic
Gears
Infinite (2-range) forward and reverse
Tires
Front tires
Ag, Lawn/Turf: 18×8.50-10
Rear tires
Ag, Lawn/Turf: 26×12.00-12
Three-Point Hitch
Caterogy
I
Control type
–
Lift capacity (at ends)
540 kg (1,190 lbs)
PTO (Power take-off shaft)
Middle PTO type
Independent
Middle PTO speed
2,000 rpm
Rear PTO type
Independent
Rear PTO speed
540 rpm
Hydraulic system
Hydraulic type
Open center
Pump flow
4.1 gpm (15.5 lpm)
Steering flow
2.0 gpm (7.6 lpm)
Total flow
6.1 gpm (23.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
The Massey Ferguson GC2300 is a 4WD sub-compact utility tractor from the GC series. This tractor was manufactured by Iseki for Massey Ferguson from 2005 to 2008. The Massey Ferguson GC2300 is equipped with a 1.1 L (68.5 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (2-range) forward and reverse gears.
