Material Data Center | Datasheet KEBAFLEX H / SPC 55 A.04.1 Black

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of KEBAFLEX H / SPC 55 A.04.1 black - TPS - Barlog plastics GmbH

Material Data Center offers the following functions for KEBAFLEX H / SPC 55 A.04.1 black:unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Kebaflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet: Processing/Physical Characteristics - Mechanical properties - Other properties - Processing Recommendation Injection Molding Any use of this information falls under the rules of our disclaimer.

Processing/Physical Characteristics	Value	Unit	Test Standard
ISO Data
Molding shrinkage, parallel	3.3	%	ISO 294-4, 2577
Molding shrinkage, normal	2.0	%	ISO 294-4, 2577

Mechanical properties	Value	Unit	Test Standard
ISO Data
Stress at 10% elongation	0.6	MPa	ISO 527
Stress at 100% elongation	2.1	MPa	ISO 527
Stress at 300% elongation	4	MPa	ISO 527
Stress at break TPE	6.3	MPa	ISO 527
Strain at break TPE	564	%	ISO 527
Compression set at 23 °C, 24h	28	%	ISO 815
Compression set at 70 °C, 24h	70	%	ISO 815
Compression set at 100 °C, 24h	76	%	ISO 815
Shore A hardness	55	-	ISO 7619-1

Other properties	Value	Unit	Test Standard
Density	1060	kg/m³	ISO 1183

Processing Recommendation Injection Molding	Value	Unit	Test Standard
Pre-drying - Temperature	80	°C	-
Pre-drying - Time	3 - 4	h	-
Processing humidity	≤0.02	%	-
Melt temperature	220 - 250	°C	-
Mold temperature	20 - 40	°C	-

CharacteristicsProcessingInjection MoldingDelivery formBlackFeaturesGood Adhesion, Soft FeelApplicationsAutomotive, Electrical and Electronical, Sports EquipmentRegional AvailabilityEuropeDisclaimerCopyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.