Material Data Center | Datasheet Xyron™ G703H

Trang chủ » G703h » Material Data Center | Datasheet Xyron™ G703H

Có thể bạn quan tâm

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of XYRON™ G703H - (PPE+PS)-GF30 - Asahi Kasei

Material Data Center offers the following functions for XYRON™ G703H:unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Xyron datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet: Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding Any use of this information falls under the rules of our disclaimer.

Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 117 MPa ISO 527
Flexural modulus, 23°C 7370 MPa ISO 178
Flexural strength 181 MPa ISO 178
Charpy notched impact strength, +23°C 10 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 139 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 40 E-6/K ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.5 mm -
ASTM Data
DTUL @ 264 psi 140 °C ASTM D 648
Electrical propertiesValueUnitTest Standard
ISO Data
Relative permittivity, 100Hz 3.3 - IEC 62631-2-1
Relative permittivity, 1MHz 3.3 - IEC 62631-2-1
Dissipation factor, 100Hz 9 E-4 IEC 62631-2-1
Dissipation factor, 1MHz 15 E-4 IEC 62631-2-1
Volume resistivity >1E13 Ohm*m IEC 62631-3-1
Surface resistivity >1E15 Ohm IEC 62631-3-2
Electric strength 44 kV/mm IEC 60243-1
Other propertiesValueUnitTest Standard
Water absorption 0.06 % Sim. to ISO 62
Density 1280 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 90 - 100 °C -
Pre-drying - Time 2 - 4 h -
Melt temperature 260 - 300 °C -
Mold temperature 60 - 100 °C -
CharacteristicsProcessingInjection MoldingRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.

Từ khóa » G703h