Materials For Brass Fittings - Gnali Bocia Srl

• Home
• Products
• Certifications
• Where we are
• Contacts
• Blog

ARCHIVE

january 2023 december 2022 november 2022 october 2022 september 2022 august 2022 july 2022 june 2022 may 2022 april 2022 march 2022 february 2022 december 2021 november 2021 october 2021 september 2021 august 2021 july 2021 april 2021 march 2021 february 2021 january 2021 december 2020 november 2020 october 2020 september 2020 august 2020 july 2020 june 2020 may 2020 april 2020 march 2020 february 2020 january 2020 december 2019 october 2019 august 2019 may 2019 march 2019 february 2019 january 2019 december 2018 november 2018 october 2018 september 2018 august 2018 july 2018 april 2018 march 2018 february 2018 january 2018 december 2017 november 2017 october 2017 september 2017 august 2017 july 2017 june 2017 may 2017 april 2017 march 2017 february 2017 january 2017 december 2016 november 2016 october 2016 september 2016 august 2016 july 2016 june 2016 may 2016 april 2016 march 2016 february 2016 january 2016 december 2015 november 2015 october 2015 september 2015 august 2015 july 2015 june 2015 may 2015 april 2015 march 2015 february 2015 january 2015 december 2014 november 2014 october 2014 september 2014 august 2014 july 2014 june 2014 may 2014 april 2014 march 2014 february 2014 january 2014 december 2013 november 2013 october 2013 september 2013 august 2013 july 2013 june 2013 may 2013 april 2013 march 2013 february 2013 january 2013 april 2011

Materials for brass fittings

Brass fittings made of material with high machinability to keep costs down

In the plumbing and heating systems the brass fittings are one of the primary elements together with the tube that can be metallic, and in this case it is screwed directly to the fitting or composite, such as multilayer. And then there is the need to use special brass fittings with an ogive that serve both the seal and the connection. For their construction we start from two materials that are similar in terms of resistance and above all of potability, but also of workability to the tool, which is one of the main processes to obtain the final fitting. These two alloys are the brass CW614N and CW617N also known as OT58, what means an alloy with an average copper content of 58%, For the brass fittings, in case they are made by turning, the CW614N is used, which is usually supplied in solid or perforated bars and from which the particular parts for machining can be directly obtained. But if the brass fittings are made from a forged blank, we use the CW617N as material, which has a slightly higher lead content than the other alloy.   20/12/2018 See also 20/03/2019 Brass fittings: the choice of the alloy 20/01/2013 Gnali Bocia: design of brass fittings Brass fittings are used to connect different parts together, allowing gas and liquid to flow through. 20/05/2014 The importance of lead in hydraulic fittings Lead is an element that enhances the workability in cold conditions of hydraulic fittings and therefore it should be added in small quantities. 20/02/2015 Key features of brass threaded fittings The threads and above all the parameters for the use of brass threaded fittings 20/03/2013 Hydraulic fittings and their usage in various sectors of interest Through the hydraulic fittings water flow is transported from one zone to another, thus reaching the required supply point I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'. 2026 © All rights reserved - Self-managed by Gnali Bocia srl - P.iva: 00572250983 - Glacom®Privacy Policy - Cookie Policy - Whistleblowing