N/mm² To Kg/cm² Conversion Table - SensorsONE

• Skip to primary navigation
• Skip to main content
• Skip to primary sidebar

A pressure measured in newtons per square millimetre is converted into kilograms per square centimetre as follows:

• 1 kg/cm² = 98066.5 pascals (Pa)
• 1 N/mm² = 1 MPa = 1000000 pascals (Pa)
• kg/cm² value x 98066.5 Pa = N/mm² value x 1000000 Pa
• kg/cm² value = N/mm² value x 10.1972

Featured N/mm² pressure unit scaled products

• 600 bar, 9000 psi, 60 MPa Pressure Sensors, Transducers & Transmitters
• 350 bar, 5000 psi, 35 MPa Pressure Sensors, Transducers & Transmitters
• 700 bar, 10000 psi, 70 MPa Pressure Sensors, Transducers & Transmitters
• 1000 bar, 15000 psi, 100 MPa Pressure Sensors, Transducers & Transmitters

Enter a pressure in N/mm² below to convert it to the equivalent pressure in kg/cm².

From	N/mm²
To	kg/cm²

Sorry, a graphic could not be displayed here, because your browser does not support HTML5 Canvas.

Featured kg/cm² pressure unit scaled products

• -760mmHg to +20 kg/cm² pressure transmitter with HART coms
• -1 to 20 kg/cm² digital pressure gauge for live computer data acquisition
• 20 kg/cm² range 5Vdc output pressure transducer for potable water
• Diaphragm sealed high temperature pressure transmitter for -1 to 25 kg/cm²

Choose a value between 0 and 1000 N/mm² from the pressure conversion table below, to obtain the converted value in kg/cm².

N/mm²	kg/cm²	🔗

Primary Sidebar

Wirelessly Measure & Log Pressure

Products

• Pressure
• Level
• Temperature
• Interfacing
• Datalogging
• Calibration
• Wireless

Application Selection Guides

• Absolute Pressure
• Air Pressure
• Barometric Pressure
• Compound Pressure Ranges
• Dual Temperature and Pressure
• Hydrostatic Pressure
• Low Pressure Range
• Marine Approval
• Overpressure Protection
• Pressure Calibration
• Submersible
• Suction Pressure

Product Selection Guides

• Data Loggers
• Differential Pressure Sensors
• Digital Pressure Gauges
• Digital Pressure Sensors
• Hydrostatic Liquid Level Sensors
• Millivolt Output Pressure Transducers
• Pressure Transducers
• Pressure Transmitters
• Voltage Output Pressure Transducers

Help Guides

• Determining the hydrostatic pressure range for a tank level sensor
• How to get a 10 volt signal from a 4-20mA output pressure sensor
• Measuring vacuum with negative gauge or absolute ranges
• Pressure Sensor Accuracy Specifications
• Measuring liquid level in a sealed tank with a hydrostatic pressure sensor
• What is the difference between gauge and absolute pressure measurement
• Measuring the difference in air pressure between rooms
• Measurement Accuracy
• Symptons and Causes of Damage to Pressure Transducer Diaphragms
• How to Connect a 4-20mA Current Loop Pressure Transmitter
• Difference between vented and non-vented water level measurement
• Determining water tank volume using hydrostatic pressure
• What is difference between working, burst and over pressure
• Process Connections
• Advantages and Disadvantages of using a 4 to 20 mA Signal
• Not reading zero when pressure is vented to atmosphere
• Measuring the volume of liquid in a horizontal cylinder tank
• Determining calibration error of Bourdon tube pressure gauge
• What is the difference between zero offset and zero drift?
• Why use 4-20mA and 3-15 psi rather than 0-20mA & 0-15psi
• How do you measure the volume of a liquid using pressure
• What is the difference between vacuum and absolute pressure
• What does negative and positive gauge pressure mean
• Measuring negative pressure using a positive differential pressure range
• Measuring vacuum as a negative gauge pressure using a dp sensor
• Measuring liquid level in a tank using a dp sensor
• Measuring density of a liquid using a dp sensor
• Pressure Sensor Technology Comparative Guide

Email Your Enquiry

[email protected] By clicking "OK" or continuing to use this website you are providing your consent to use cookies as described in our Privacy Policy