NET DVR DVR7004 USER MANUAL Pdf Download - ManualsLib

Có thể bạn quan tâm

× Bookmark added × Added to my manuals

Manuals
Brands
Net DVR Manuals
DVR
DVR7004
User manual

Net DVR DVR7004 User Manual Dvr7000series Hide thumbs 1 Table Of Contents 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83

page of 83 Go / 83
Contents
Table of Contents
Bookmarks

Table of Contents

Table of Contents
Chapter 1 Brief Introduction about the DVR
- Summarization
- Product Introduction
- Playback 5
Chapter 2 Technology Guideline and Main Functions
- Technology Guideline
- Main Functions
- Sequence Cruise 4
Chapter 3 Equipment Installation and Illustration
- Installation Environment and Cautions
  - Attentions on Installing Hard Disk
- Package Checking
- The Back Panel Instructions of DVR
  - The Back Panel Chart
  - Video/Audio Connection
  - USB Backup Interface
  - Network Interface
  - Alarm Input/Output Connection
  - RS-485/Rxconnection
  - Keyboard Controlling
- Front Panel Description
  - Front Panel and Layout Description
- Mouse Operation
- IR Remote Control
  - Remote Controller Layout
- Menu Operation Description
  - Menu Structure Chart
  - Menu Option Schedule
Chapter 4 Device Operation
- Power On/0Ff and Login /Lock
  - Keystroke Unlock/Lock
  - System Login
  - System Lock
  - Main Menu
- General Setup
- Time Setup
- Record Setup
  - Record Parameter
  - Manual Record
  - Schedule Record
- Output Setup
  - Preview Digital Zoom
  - Sequence Cruise
- Alarm Setup
  - Motion Detectiom
  - Sensor Alarm Setup
  - Alarm Output
  - Email Setup
- COM Setup
  - Com
  - Ptz
- Network Setup
  - IP Setup
  - Ddns
  - Pppoe
- Playback
- System Management
  - User Management
  - Backup Management
  - Disk Management
  - Restore Default
  - Password Reset
  - System Information
    - Record Status
    - Alarm Status
    - Online Status
    - Log Information
  - Software Upgrade
    - Client Software Upgrade
  - USB Upgrade
  - Power Resume
Appendix 1 IE Operation Instructions
- LAN Configuration for IE Browse
- WAN Operation Instructions
Appendix 2: Net DVR Q&A

Quick Links

1 Network Interface
2 System Login
3 Network Setup
4 Password Reset
Download this manual

Thank you for selecting our products. We will offer the best service for you wholeheartedly. This manual applies to DVR7000series, and we take 8 channel DVR (DVR7008M) as a sample. In this series, different product models' configuration will have a little difference, and it will work the difference between product function and operation. It is for reference only. We will not provide any new information separately for later firmware update. The updating files will be added into the new edition of the user manual and will also be posted on our website in the download center. This user manual may have some inaccuracy or misprint. We sincerely hope your timely feedback and comments to let us correct and improve this booklet in the subsequent edition. Preface 1 Net DVR Table of Contents Previous Page Next Page

Table of Contents loading

Summary of Contents for Net DVR DVR7004

Page 1 Net DVR Preface Thank you for selecting our products. We will offer the best service for you wholeheartedly. This manual applies to DVR7000series, and we take 8 channel DVR (DVR7008M) as a sample. In this series, different product models’ configuration will have a little difference, and it will work the difference between product function and operation.
Page 2: Table Of Contents
User Manual CONTENT Preface..........................................1 Chapter 1 Brief Introduction about the DVR ..................................6 1.1 Summarization......................................6 1.2 Product Introduction....................................7 Chapter 2 Technology Guideline and Main Functions ................................9 2.1 Technology Guideline ........................................9 2.2 Main Functions......................................10 Chapter 3 Equipment Installation and Illustration...............................14 3.1 Installation Environment and Cautions ..................................
Page 3 Net DVR 3.3.8 Intercommunication Port..................................24 3.4 Front Panel Description..................................25 3.4.1 Front Panel and Layout Description..............................25 3.5 Mouse Operation ........................................... 2 8 3.6 IR Remote Control ........................................3 0 3.6.1 Remote Controller Layout ....................................3 1 3.7 Menu Operation Description ....................................... 3 2 3.7.1 Menu Structure Chart ......................................
Page 4 User Manual 4.4 Output Setup ..........................................4 5 4.4.1 Dispay Setting ........................................4 5 4.4.2 Preview Digital Zoom ......................................4 6 4.4.3 Sequence Cruise ........................................4 7 4.5 Alarm Setup ............................................ 4 8 4.5.1 Motion Detectiom ........................................ 4 8 4.5.2 Sensor Alarm Setup ....................................... 5 1 4.5.3 Alarm Output .........................................
Page 5 4.10.4 Online Status ....................................66 4.10.5 Log Information....................................67 4.11 Software Upgrade....................................68 4.11.1 Client Software Upgrade...................................68 4.11.2 USB Upgrade....................................69 4.12 Power Resume......................................70 Appendix 1: IE Operation Instructions................................71 1. LAN Configuration for IE Browse ..................................7 1 2. WAN Operation Instructions................................72 Appendix 2: Net DVR Q&A....................................75...
Page 6: Chapter 1 Brief Introduction About The Dvr
User Manual Chapter 1 Brief Introduction about the DVR 1.1 Summarization DVR7000 series Digital Video Recorder are designed for video/audio digital surveillance system. They are adopting H.264 compress format, integrate the embedded RTOS and processor to realize all of the functions like video and audio acquisition and compression, storing, remote control, Multi-PTZ control and alarm in a single board.
Page 7: Product Introduction
Net DVR 1.2 Product Introduction DVR7000 series DVR: model D VR700 4 D VR700 4V DVR7008M D VR700 8MV D VR700 8M D VR7008MV func tion Video fo rmat C IF/D1 C IF/D1 CIF /D1 C IF /D1 C IF/D1...
Page 8: Playback 5
User Manual model D VR701 6 DVR7016V DVR7024 DVR7024 func tion Video fo rmat C IF/D1 CIF/D1 Video in pu t 1 6 channels 16 chann els 24cha nne ls 24channel s Video output C VBS/VGA CVBS/VGA CVBS/VGA CVBS/VGA Audio in pu t 1 6 channels 24 channels Audio o utput...
Page 9: Chapter 2 Technology Guideline And Main Functions
Net DVR Chapter 2 Technology Guideline and Main Functions 2.1 Technology Guideline 1. Video parameters Video input: composite video input PAL(25 fps) NTSC (30 fps ) (BNC ,1Vp-p ,75 Ω) Video output: 1 channel composite video output(BNC,1Vp -p,75 Ω)PAL(625 line/frame)NTSC (525 line/frame) 2.
Page 10: Main Functions
User Manual 10. Backup interface: USB2.0 interface 11. Network port: RJ 45 10M/100M Ethernet Interface 12. Matrix:All model DVRs support video matrix (except DVR8004 and DVR8204) 12. Power supply: 220 ± 30% V,50 ± 3% HZ, 110 ± 20% V,60 ± 3% HZ 13.
Page 11 Net DVR u Recording function 1. Support 4 record modes: manual, schedule, motion and alarm recording. 2. Video motion detection function: multi detection areas can be set up to 5 sensitive levels. 3. Support screen shield. Each channel can max setting 4 mask areas, support part area or full screen mask.
Page 12: Sequence Cruise 4
User Manual 3. Support part area or full screen video mask. 4. Support video parameter adjustment (brightness, contrast, hue, saturation). 5. Support channel auto sequence cruise. 6. Support intercommunication(inter-talk). Storing and backup functions 1. It has the specialized USB2.0 backup interface in the back panel. . 2.
Page 13 Net DVR u Network functions 1. Support TCP/IP protocol (support ARP, RARP, IP, TCP,UDP, PPPOE, DHCP, DDNS). Support PPPOE ,auto reconnect and DDNS function. 2. Perfect network-end control order (Client manager and IE browse can be used to control the DVR, such as setting the parameters,remote upgrade, etc).
Page 14: Chapter 3 Equipment Installation And Illustration
● Heat release fans are placed for cool down, so you should put the device on ventilated place ● The back of Net DVR should be placed 6cm away from the other device or wall while installing ● Moving the Net DVR between two places with high difference in temperature will shorten the using life...
Page 15 ● Video/audio/RS485 devices cann’t be plug or draw when the power is on, or else the equipment will be easily damaged. ● Use the power on/off button on the front panel instead of direct shut off the power directly when turn off the Net DVR, so that the hard disk won’t be damaged.
Page 16: Attentions On Installing Hard Disk
User Manual 3.1.1Attentions on Installing Hard Disk 1. Recommend high speed hard disk above 7200 rpm. 2. The capacity of the single hard disk is above 32GB at least, each HDD can max support 2000 GB. 3. The selection and calculation for capacity: Total capacity= channels number * record time needed (hours) *capacity per hour (M/hour) For example: If you choose the recording bit rate type for CBR 512KB (refer to 4.3 for bit rate types), the HDD Capacity /hour/channel=bit rate (Mbps) * 3600s=512Kbps * 3600s=1800MBb=225MB (1MB=8Mb).
Page 17: The Back Panel Instructions Of Dvr
Net DVR 3.3 The Back Panel Instructions of DVR 3.3.1 The Back Panel Chart DVR7008M : DVR7016:...
Page 18 User Manual Interface Operation Manual VIDEO IN Connect(simulation) video input devices, standard BNC int erface VIDEO OUT Connect monitor, local video signal and menu output AUDIO IN Connect audio input , standard BNC interface AUDIO OUT Connect audio devices, local audio signal output Connect VGA Connect mike for voice intercommunication Connect USB, backup files...
Page 19: Video/Audio Connection
Net DVR 3.3.2 Video/Audio Connection Video output: 1 VGA output, 1 CVBS output. Audio input: User can use our special cable to capture audio. Audio output cautions: If you want to connect sound box for audio output, please use 3.5mm to two lotus flower cable for change.
Page 20 User Manual Alarm sensor connection: Alarm input: The physical connections of the normal on/off mode are the same. And user can select normal on/off mode in the DVR. Typical alarm connection: the sensor power supply is provided by DVR. The fig is as follows: NO/NC C +12V GND Input 1 Input 2...
Page 21 Net DVR If the distance between the probe and DVR is too far, the probe requires a separate power supply: 12V power supply - NO/NC +12V GND Input 1 Input 2 Sensor...
Page 22 User Manual If we parallel connected the sensor, the DVR can not recognize the triggered sensor. User need to have a resistance. +12V GND Input 1 Input 2 NO/NC NO/NC NO/NC Sensor 1 Sensor 2 Sensor 3...
Page 23 Net DVR Alarm output connection: The alarm output side is normal-off and do not have voltage output. The other alarm equipments need the individual power supply. supply the power separately Alarm Output1A Output1B Normally, Alarm’s power usually is much bigger, preferably supply power separately, and do not use the DVR's power to supply.
Page 24: Rs-485/Rxconnection
Attentions for PTZ decoder connection: 1. Confirm that the PTZ decoder and Net DVR are one point ground connected, or common mode voltage might exist to cause the PTZ invalid. 2. Prevent high voltage inroad, carefully dispose connection cables secure thunder proof.
Page 25: Front Panel Description
Net DVR 3.4 Front Panel Description 3.4.1 Front Panel and Layout Description...
Page 26 User Manual S.N. Name Mark Note Power Turn on or off DVR Menu Enter the system main menu 1.Press to enter the record files query interface,press again to cancle Playback(PTZ) 2.Long press to enter the PTZ control mode,long press again to cancle 1.Login and lock the system Lock(Auto) 2.Under PTZ control,it means "Auto"...
Page 27 Net DVR While supplying power to DVR and the system running,this lamp will be POWER lighted to green.When the system is in standby mode,this lamp will be lighted to red.When power supply cut off,the lamp will be off Hard disk indication,it is blink when the hard disk is working,or it will be...
Page 28: Mouse Operation
User Manual 3.5 Mouse Operation Besides front panel and remote controller, mouse also can be used to control the DVR. System also supports mouse hot plug. Right click the mouse: 1. If the system is in login status, right click the mouse,then shortcut menu will display. 2.
Page 29 Net DVR Double click left mouse: the division can be switched by double click. Double click left mouse in the input box to enable the software keyboard , right click the mouse to exit software keyboard. The interface is as follows:...
Page 30: Ir Remote Control
User Manual 3.6 IR Remote Control...
Page 31: Remote Controller Layout
Net DVR 3.6.1 Remote Controller Layout Keystroke instruction 1. Power 14. 9WXYZ 27. Menu 2. Mute 15. CALL 28. VGA/TV 3. +, Focus+ 16. Log in/Log off 29. F1 4. -, Focus- 17. Information 30. PTZ 5. Playback 18. Backup 31.
Page 32: Menu Operation Description
User Manual 3.7 Menu Operation Description 3.7.1 Menu Structure Chart...
Page 33: Menu Option Schedule
Net DVR 3.7.2 Menu Option Schedule Menu Instruction 1.Display contrast:from 1:1 to 1:5,the color of background is changed from light to dark. 2.Video format(PAL,NTSC). General General 3.Record overwrite mode(auto,alarm indicate); setup 4.Auto lock setup:1-10 minutes. setup 5.Resolution:800 X 600,1024X768,1280X1024,1440X900 6. Language switching: Support in both Chinese and English switching Time setup Set system date,time.
Page 34 User Manual 6.Video frame rate:PAL 2-25F/S optional;NTSC 2-30 F/S Record Record optional.(D1:2-30 F/S optional.) setup parameters 7.Audio. 8.Network HD, bitrate, quality, audio(corresponding to sub stream). 1.Setting channel name. 2.Video mask area. 3.Channel duplication. Display 4.Date format setup:year-month-day,month-day-year. Setup Output 5.OSD setup:channel name,time,week,temperature. 6.Video parameters setup:brightness,transparence,contrast,Hue.
Page 35 Net DVR 1.Alarm schedule. 2.Motion detect sensitivity:1-5 level(5 is the highest). Motion 3.Set motion detection area. Detection 4.Video lost alarm. 5.Channel duplication. 1.Sensor ID. 2.Alarm schedule. Sensor 3.Relate the recording channel. Detection 4.Recall PTZ preset position. Alarm setup 5.Channel duplication.
Page 36 User Manual Setting server name,DNS server,IP address,network transport ports,LAN IP Setup multicast Network Setup PPPOE Setting dial-up username and password, for PPPOE dial-up DDNS Choose DDNS server Keyboard address,series type,COM device,baudrate,date bit,stop bit,parity COM Setup COM Setup PTZ Setup PTZ protocol,speed,address code 1.Add and delete user account.
Page 37 Net DVR Syetem Display software version, main board serial No.,SCM version, IP address, MAC Information address, file system, video standard and language Recording Display the recording status of each channel Syetem Status Information Alarm Status Display the alarm status of each channel(sensor alarm,m otion alarm,lost alarm)
Page 38: Chapter 4 Device Operation
User Manual Chapter 4 Device Operation 4.1 Power On/off and Login /Lock Power on: After connected up the power cable, the front panel of the DVR will start and enter the standby state. Click the “power” button on the remote controller for 3 seconds to enter the running state. Power off: When the system is under the running state, click “power”...
Page 39: System Login
Net DVR 4.1.2 System Login When the system is in the status of locking “ ”, press the “Login/Lock” on the remote controller or right click the mouse, the figure of login will appear as follows: Input user name and password on the login port(distribute in authority in advance), after you input correct user name and password and press “ENTER”, the sign “...
Page 40: General Setup
User Manual 4.2 General Setup 4.2.1 General Setup Overwrite We suggest that user select auto overwrite mode, when disk is full, the DVR will auto overwrite the earliest recording file. The alarm indicate method: When HDD is full, GUI information indicates whether overwrite the earliest recording files, and stop the recording. Auto locking When you enable auto locking, system will enter the status of locking in fixed time(1~10 min).
Page 41: Time Setup
Net DVR 4.2.2 Time Setup l Time setup After login, user can through “general setup”-> “time setup” to enter the time setup interface. The fig is as follows: This function is used to set or modify current system time, the system adopted the perpetual calendar, the day will change as the date’s change.
Page 42: Record Setup
User Manual 4.3 Record Setup 4.3.1 Record Parameter Before using the record function, it is important to setting the record parameter. It is related to video playback and hard disk capacity, etc. After login, select “record setup”-> “record parameter”,enter the interface as follows: l Channel No.:Customer can select the channel by pressing “+”, “-”...
Page 43: Manual Record
Net DVR l Encoding stream: When compressing the intense moving image, we should make a upper limit of the compression bitrate, there are (unit: bps): 100K,128K,256K,512K,1M,1.5M,2M,3M,4M(Under the CIF maximizing the 1M.Note: the more intense of the movement, the higher bite rate you should set).
Page 44: Schedule Record
User Manual 4.3.3 Schedule Record To enter the schedule recording interface,follow the steps below: 1.Select the corresponding channel No.. 2.Select the recording date(everyday or someday),and set the record deployment period. 3.Set the alarm deployment period ,system supports setting multi-periods. Time period should be selected in chronological order. Tick off the date and then enable the time period.
Page 45: Output Setup
Net DVR 4.4 Output Setup 4.4.1 Display setting After login,click “main menu”-> “output setup”-> “display setup”, enter the interface as follows: It’s used for adjusting the channel parameters, include channel name, video mask, video adjustment, channel name position and OSD setting.
Page 46: Preview Digital Zoom
User Manual l Set by the front panel or remote controller : press direction key to move the cursor, press “OK” to confirm the start position, then move the cursor to select the area you want to mask, press “OK” again to confirm the end position. Press “clear” to cancel the area. l Back to the channel setting interface, click save to activate the setting.
Page 47: Sequence Cruise
Net DVR the mouse to exit the digital zoom. 4.4.3 Sequence Cruise This function is used to cruise different channels, user can select sequence channel No.,sequence division,sequence interval time. The interface is as follows: l Sequence format:1ch,4ch,9ch divisions. l Sequence channel number: user can set the sequence channel number, the sequence channel number must be more than the selected division.
Page 48: Alarm Setup
User Manual 4.5 Alarm Setup 4.5.1 Motion Detection 1.After login, click “main menu”-> “alarm setup”,the interface is as follows: By analyzing the real-time video, the system could confirm whether the video scene has changed or not. If you need record when the video scene is changed, then you can through “Motion Detection”...
Page 49: Sensor Alarm Setup
Net DVR Setting detection area by mouse: Left click a pane as the start position of the detection area, then click another pane as the end position, and the area will shown. Double left click mouse to cancel your choice. Click “return” to record setup interface, click “save” to save the setup.
Page 50 User Manual (3) Choose the sensor type. (4) Choose the sensor number. (5) Set the deployment period (the specific setting please refer to schedule record),left click mouse to set start point then drag mouse to the end point. (6) The linkage record channel can record when alarming, we recommend that each channel correspond with each sensor, so that we can find the alarm record files by channel, the yellow channel button means have linkage alarm record, gray means not linkage to any alarm record.
Page 51: Alarm Output
Net DVR 4.5.3 Alarm Output After login,through “Alarm setup”-> “Alarm output” continuous operations to enter Alarm output interface.The interface is as follows: The “Alarm output” interface have the following options: Sensor type,Alarm to full-screen,Alarm to Buzzer,Audio Alarm,Alarm output Time, Alarm output deployment time.
Page 52: Email Setup
User Manual 4.5.4 Email Setup After login, click “main menu”-> “alarm setup”-> “email setup” ,the interface is as follows: Email setup steps: (1) Enable the Email upload, select the related email. When alarm(video lost, motion detect, sensor detect) triggered, the DVR will send email to user mail account automatically.
Page 53: Com Setup
Net DVR 4.6 COM Setup After login, click “Main Menu”-> “COM setup” ,the interface is as follows: You can do the operation of connecting other serial device to DVR in this interface.DVR provide two pairs of serial connection terminal:RS485 and RX.The two serial port both are full duplex terminal which have receive and transmit function. DVR can be connected to PTZ, serial keyboard and other serial devices at the same time.
Page 54: Ptz
User Manual 4.6.2 PTZ The procedure of PTZ setting: l Set COM type, COM device and baudrate in the “COM setup” interface. l Enter the “PTZ Setup” interface to set protocol and address code (The default PTZ address code is coincide with every channel, for instance, the first channel’s PTZ address code is 1).
Page 55: Network Setup
Net DVR l Multi-preset position sequence (Note: Only enable when system log off) (1) Sequence interval time:0-99s. (2) Preset No.:each channel can max set 16 preset position. (3) Range of preset No.:001-255,255 means closed. 4.7 Network Setup After login, user can through “Main menu”-> “Network Setup” to enter the network setup interface.
Page 56: Ddns
User Manual HTTP port, you should type http://IP:port for IE browse. l Enable multicast: This function only affects UDP stream. l Multiple IP address:Multiple IP address set range is from 224.0.0.0 to 239.255.255.255;The system default is 239.0.0.1. l Multiple port:The default port is start with 8000.Note: If there are 2 DVRs or above in one section of the net, please ensure that the multiple port is unique, or you cannot open the multiple video.
Page 57: Pppoe
Net DVR 4.7.3 PPPOE Select “Network Setup” and click “PPPOE”, and the interface is as follows: PPPOE is one of the mode to connect to the WAN: Connect to the WAN by system via dialing the ADSL directly. l Username:ADSL account user name.
Page 58: Playback
User Manual 4.8 Playback System has two ways to enter playback interface: (1) Enter the playback interface by press “play” button on the front palnel or remote controller . Click yellow magnifier icon to start the accurate time playback,press “playback” again you can switch to the record file inquiry interface. (2) After login, click “main menu”->...
Page 59: System Management
Net DVR l Right click the mouse during playback to use/hide playback control menu. l Support digital zoom when playback by mouse. Operation procedure: Enter the playback image, click mouse wheel to start option,left click mouse for selecting digital zoom start point, then drag mouse to the point where you want to be digital zoom end point. There will be appear an square. Drag any border of the square area to zoom in.
Page 60 User Manual l Modify password:Using the direction key of the remote controller to move the cursor to the user list, press “OK”, then you can get in the interface, or double click the mouse to get in. l Support local and remote rights setting. l Display the user list when login: When login the DVR, use the “+”, “-”...
Page 61: Backup Management
Net DVR 4.9.2 Backup Management There are three ways for backup:(1) Backup the file to remote computer through network. For detail operation please refer to the DVR client user manual. (2) U disk backup,suppot U disk hot-swappable:The backup disk must be FAT32 and capacity is bigger than 512M.(3) Support CD/DVD burnner.
Page 62: Disk Management
User Manual (2) Move the cursor to “ADD” and press to confirm. The added file will appear in the backup files list. For more record files, please select the time period and channel number and add them to the list. (3) After you add all the files, move the cursor to “BACKUP”...
Page 63: Restore Default
Net DVR Disk format: System supports only FAT32 format, the capacity of the HDD is above 32G.System supports only one partition for backup. Format: Select the HDD NO., then focus on the “format” icon and press “OK” to choose the type of the partition (DATA or BACKUP ). The interface is as follows, after you confirmed the partition type, press “OK”, the system will prompt “It’s formatting...”.
Page 64: Password Reset
User Manual Alarm output(1~2);Video area mask(No mask);Preset poll(Closed);Pre-record time(10s);Delay record time(30s). 4.9.5 Password Reset When you forget the system password or the admin’s password, the factory’s default setting can be retrieved by the following operation. The operations are as follows: 1.Shut off the machine and cut off the power supply.
Page 65: System Information
Net DVR 4.10 System Information 4.10.1 System Information It displays software version, IP address etc. The interface is as follows: 4.10.2 Record Status The interface is the right figure above: Quick inquire the current system record status. It shows the record status of each channel’s current record type, record quality,definition and the audio record status(on or off),if in the recording status, the “Type”...
Page 66: Alarm Status
User Manual 4.10.3 Alarm Status The interface is as follows: It shows the alrm type of each channel: Sensor alarm (Red color), motion alarm(Yellow color) and video lost alarm(Blue color). You can clear the alarm through the “CLEAR” button of the front panel or remote controlleror click the “alarm clear” on the menu by mouse. 4.10.4 Online Status It displays the information of outer PC which connected to DVR.
Page 67: Log Information
Net DVR 4.10.5 Log Information The interface is as follows: At the bottom of log information interface will display page No., user can click page up/down to check (The number of the log item is no limited). The log file can’t be recognized on PC,the log information of host side can search and show through client software.Click page up/down key for category search in different pages.
Page 68: Software Upgrade
Ø Make sure the client installation procedure is the same as the system. The procedure is as follows: 1. Connect the Net DVR to PC by coherent network cable or LAN (pay attention to IP conflict). 2. Before upgrading, please confirm the IP address of host computer, then enter client end.
Page 69: Usb Upgrade
Net DVR 6. Waits for 3 seconds, the DVR will display “Transmitting data finished. Updating software ...”. It probably takes 2-3 minutes to update the software. 7. When a window that contains the information of upgrading successfully pops up, it means that the update finished. Then, the machine will automatically restart.
Page 70: Power Resume
User Manual 5. After the system restart, the admin password is the former version's. 4.12 Power Resume If the power is shut down unexpectedly when the system is in standby or working status, system could start automatically restart and resume to the original status after power back.
Page 71: Appendix 1 Ie Operation Instructions
Net DVR Appendix 1 IE Operation Instructions Notice: Please set firewall rank for low or medium, and surf software or net assistant software, etc. should be blocked or unloaded. Otherwise the software may not run properly. Please guarantee to install DirectX 9.0 of Microsoft and confirm the Internet Explorer edition is 6.0 version or above.
Page 72: Wan Operation Instructions
User Manual 3. Please refer to “Client user guide” for further operation. 2. WAN Operation Instructions nIf there is a fixed WAN IP address that can be allocated to the DVR host, the DVR host can directly access wide-area network, and can be visited after set up IP, subnet mask and gateway.
Page 73 Net DVR Take the TP-LINK as an example: [1] After signing up routers, by choosing “Running Status” icon on left side menu of Figure 2, view the LAN IP and WAN IP address of the routers, such as, the LAN IP address 192.168.2.1, WAN IP address 116.30.143.163.
Page 74 User Manual a. When the two ports are default setting, directly input the WAN IP address (116.30.143.163) shown in Figure 2 into client manager, and sign in. After login successfully, the interface is shown as Figure 4. For IE browse, directly input the WAN IP address (116.30.143.163) shown in Figure 2, and input the correct user name and password, you can log in.
Page 75: Appendix 2: Net Dvr Q&A
Net DVR Appendix 2: Net DVR Q&A Thank you for choosing our DVR series products. We will always be at your services. In case you have any difficulty while using the products, please refer to the below frequently asked questions & answers. If you cannot find solution here, or the solution offered here still fails, please feel free to contact us by our hotline and/or technical support E-mail box.
Page 76 User Manual 04: Why does my system restart after self-check? 04: 1.Check the hard disks if they are in FAT32 file format, if not, change to FAT32. 2. Check Color System setting in Record Parameter menu. In case this setting is PAL, while present video input is in NTSC format, which will cause system restart. 3. Please unplug the network cable, to see whether DVRs run normally, since there are serious problems of the network which may also cause the host to restart repeatedly.
Page 77 Net DVR Only connect the case to ground by the screw on the back panel, while no other points connect to ground. 4.Please check camera, monitor and video cables if they are aging. 03: Why both the live display image and playback image are not showing the true color? 03: Please check if you have set the parameters well.
Page 78 User Manual 02: How to make remote surveillance? 02: 1.Install the client manager software, and connect the computer to the network, e.g. LAN, ADSL.2. Set a fixed IP for the DVR:a.In LAN, manually give the DVR an IP, like 192.168.1.188.b.In Internet, you should apply for the fixed IP from Internet services suppliers.3. Client PC should also get an IP.
Page 79 Net DVR Following picture shows computer and 192.168.0.19 DVR connection has been established;Following picture shows computer and 192.168.0. 11 DVR connection has not been established: E. Enter the client software. F. Input the IP, Port, user name, password of the DVR server, and then click login.
Page 80 User Manual (D)Record, video data and backup 01: Why my DVR system can’t record audio? 01: 1.Please check if you have enabled ‘Mute’ function. 2. Please check the Record parameter setup window if you have enabled audio record. 3. Check the audio cable if it is in good condition. 02: Why I enable manual record, but there is no recording data in the file list? 02: 1.
Page 81 Net DVR you are applying motion detection or alarm record mode, as system only records after the motion or alarm happens and lasts for a specific time and stops recording. So the recorded files may be not continuous. 07: Why use client manager software to backup data, click on the backup but not respond? 07: Check if firewall is open.
Page 82 User Manual 1. In case your sensing equipments are of high power consumption, to avoid damaging the alarm output module, please make relay extension connection. 2. In case you are using high frequency equipments, e.g. High frequency lights please make relay extension connection method, or alarm module may not work properly.
Page 83 Net DVR NOTES: SDVR Build20110105...

This manual is also suitable for:

Dvr7008mDvr7004vDvr7016vDvr7008mvDvr7024Dvr7016

Save PDF

Print

Print page 1 Print document (83 pages)

Rename the bookmark

Cancel

Delete bookmark?

Cancel Delete

Delete from my manuals?

Cancel Delete

Login

Upload manual

Upload from disk Upload from URL Thank you for your help!

Từ khóa » Sx-7004h-4

Chapter 1 Brief Introduction about the DVR

Chapter 2 Technology Guideline and Main Functions

Chapter 3 Equipment Installation and Illustration

Chapter 4 Device Operation

Appendix 1 IE Operation Instructions

Appendix 2: Net DVR Q&A

Quick Links

Summary of Contents for Net DVR DVR7004

Page 2: Table Of Contents

Page 6: Chapter 1 Brief Introduction About The Dvr

Page 7: Product Introduction

Page 8: Playback 5

Page 9: Chapter 2 Technology Guideline And Main Functions

Page 10: Main Functions

Page 12: Sequence Cruise 4

Page 14: Chapter 3 Equipment Installation And Illustration

Page 16: Attentions On Installing Hard Disk

Page 17: The Back Panel Instructions Of Dvr

Page 19: Video/Audio Connection

Page 24: Rs-485/Rxconnection

Page 25: Front Panel Description

Page 28: Mouse Operation

Page 30: Ir Remote Control

Page 31: Remote Controller Layout

Page 32: Menu Operation Description

Page 33: Menu Option Schedule

Page 38: Chapter 4 Device Operation

Page 39: System Login

Page 40: General Setup

Page 41: Time Setup

Page 42: Record Setup

Page 43: Manual Record

Page 44: Schedule Record

Page 45: Output Setup

Page 46: Preview Digital Zoom

Page 47: Sequence Cruise

Page 48: Alarm Setup

Page 49: Sensor Alarm Setup

Page 51: Alarm Output

Page 52: Email Setup

Page 53: Com Setup

Page 54: Ptz

Page 55: Network Setup

Page 56: Ddns

Page 57: Pppoe

Page 58: Playback

Page 59: System Management

Page 61: Backup Management

Page 62: Disk Management

Page 63: Restore Default

Page 64: Password Reset

Page 65: System Information

Page 66: Alarm Status

Page 67: Log Information

Page 68: Software Upgrade

Page 69: Usb Upgrade

Page 70: Power Resume

Page 71: Appendix 1 Ie Operation Instructions

Page 72: Wan Operation Instructions

Page 75: Appendix 2: Net Dvr Q&A