P.S. METAL WORKS CO.,LTD.

Trang chủ » H3300 C1220t-0 » P.S. METAL WORKS CO.,LTD.

Có thể bạn quan tâm

Production Size Rage
THICKNESS OUTSIDE DIAMETER
INCH 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 2.1/2 2.3/4
MM. 6 10 15 20 25 30 40 50 60 70
0.016 0.40
0.020 0.50
0.024 0.60
0.032 0.80
0.040 1.00
0.048 1.20
0.060 1.50
0.080 2.00
0.100 2.50
0.120 3.00
0.140 3.50
Seamless Brass Tubes are available in the following tempers, size-range and specifications: O = Soft anneal     OL = Light anneal      1/2H = Half hard      H = Hard
Standard Classification and Designation
JIS STANDARD POPULAR NAME U.S.A. GERMANY
ALLOY NO. SHAPE CLASS DESIGNATION C.D.A. ASTM DIN
C1220 TUBE COMMON GRADE SPECIAL GRADE C1220T C1220TS PHOSPHORUS- DEOXIDIZED COPPER 122 C12200 SFCu
C2200 TUBE COMMON GRADE SPECIAL GRADE C2200T C2200TS RED BRASS 220 C22000 (B135) CuZn10
C2300 TUBE COMMON GRADE SPECIAL GRADE C2300T C2300TS RED BRASS 230 C23000 (B135) CuZn15
C2400 TUBE COMMON GRADE SPECIAL GRADE C2400T C2400TS RED BRASS 240 C24000 (B135) CuZn20
C2600 TUBE COMMON GRADE SPECIAL GRADE C2600T C2600TS BRASS 260 C26000 (B135) CuZN30
C2700 TUBE COMMON GRADE SPECIAL GRADE C2700T C2700TS BRASS 270 C27000 (B135) CuZn36
C2720 TUBE COMMON GRADE SPECIAL GRADE C2720T C2720TS BRASS 272 C27200 (B135) CuZn37
Chemical Composition
CLASS CHEMICAL COMPOSITION %
Cu Pb Fe Sn Zn AI As Mn Ni P Si Other
C1220 99.90 min. - - - - - - - - 0.015-0.040 - -
C2200 89.0-91.0 0.05 max. 0.05 max. - Residual - - - - - - -
C2300 84.0-86.0 0.05 max. 0.05 max. - Residual - - - - - - -
C2400 78.5-81.5 0.05 max. 0.05 max. - Residual - - - - - - -
C2600 68.5-71.5 0.05 max. 0.05 max. - Residual - - - - - - -
C2700 63.0-67.0 0.05 max. 0.05 max. - Residual - - - - - - -
C2720 62.0-65.0 0.07 max. 0.07 max. - Residual - - - - - - -
Remark: 1. All the size-range and specifications are subject to change without notice 
2. Tolerances applicable to JIS, ASTM and DIN standard
Mechanical Properties
Alloy No. Temper grade Designation Tensile Test Hardness Test
Outside Dia. mm. Wall Thickness mm. Tensile Stregth N/mm2 Elongation % Wall Thinkness mm. Rockwell Hardness
HR 30 T HR15 T HRF
C1220 O C1220 T-O C1220 TS-O 4 & over, up to & incl. 250 0.25 & over, up to & incl. 30 205 min. 40 min. 0.6 min. - 60 max. 50 max.
OL C1220 T-OL C1220 TS-OL 4 & over, up to & incl. 250 0.25 & over, up to & incl. 30 205 min. 40 min. 0.6 min. - 65 max. 55 max.
1/2H C1220 T-1/2H C1220 TS-1/2H 4 & over, up to & incl. 250 0.25 & over, up to & incl. 25 245 to 325 - - 30 to 60 - -
H C1220 T-H C1220 TS-H Up to & incl. 25 0.25 & over, up to & incl. 3 315 min. - - 55 min. - -
Over 25, up to & incl. 50 0.9 & over, up to & incl. 4 - - -
Over 50, up to & incl. 100 1.5 & over, up to & incl. 6 - - -
Over 100, up to & incl. 200 2 & over, up to & incl. 6 275 min. - - - - -
Over 200, up to & incl. 350 3 & over, up to & incl. 8 255 min. - - - - -
C2200 O C2200 T-O C2200 TS-O 10 & over, up to & incl. 150 0 5 & over, up to & incl. 15 225 min. 35 min. Up to & incl. 1.1 30 max. - -
Over 1.1 - - 70 max.
OL C2200 T-OL C2200 TS-0L 10 & over, up to & incl. 150 0.5 & over, up to & incl. 15 225 min. 35 min. Up to & incl. 1.1 37 max.
Over 1.1 78 max.
1/2H C2200 T-1/2H C2200 TS-1/2H 10 & over, up to & incl. 150 0.5 & over, up to & incl. 6 275 min. 15 min. - 38 min. - -
H C2200 T-H C2200 TS-H 10 & over, up to & incl. 100 0.5 & over, up to & incl. 6 365 min. - Over 0.5, up to & incl. 6 55 min. - -
C2300 O C2300 T-O C2300 TS-O 10 & over, up to & incl. 150 0.5 & over, up to & incl. 15 275 min. 35 min. Up to & incl. 1.1 36 max. - -
Over 1.1 - - 75 max.
OL C2300 T-OL C2300 TS-OL 10 & over, up to & incl. 150 0-5 & over, up to & incl. 15 275 min. 35 min. Up to & incl. 1.1 39 max. - -
Over 1.1 - - 85 max.
1/2H C2300 T-1/2H C2300 TS-1/2H 10 & over, up to & incl. 150 0.5 & over, up to & incl. 6 305 min. 20 min. - 43 min. - -
H C2300 T-H C2300 TS-H 10 & over, up to & incl. 100 0.5 & over, up to & incl. 6 390 min. - Over 0.5, up to & incl. 6 65 min. - -
C2600 O C2600 T-O C2600 TS-O 4 & over, up to & incl. 250 0.3 & over, up to & incl. 15 275 min. 45 min. Up to & incl. 0.8 40 max. - -
Over 0.8 - - 80 max.
OL C2600 T-OL C2600 TS-OL 4 & over, up to & incl. 250 0.3 & over, up to & incl. 15 275 min. 45 min. Up to & incl. 0.8 60 max. - -
Over 0.8 - - 90 max.
1/2H C2600 T-1/2H C2600 TS-1/2H 4 & over, up to & incl. 100 0.3 & over, up to & incl. 6 375 min. 20 min. - 53 min. - -
Over 100, up to & incl. 250 2.0 & over, up to & incl. 10 355 min.
H C2600 T-H C2600 TS-H 4 & over, up to & incl. 100 0.3 & over, up to & incl. 6 450 min. - Over 0.5, up to & incl. 6 70 min. - -
Over 100, up to & incl. 250 2.0 & over, up to & incl. 10 390 min.
C2700 & C2720 O C2700 T-O C2700 TS-O 4 & over, up to & incl. 250 0.3 & over, up to & incl. 15 295 min. 40 min. Up to & incl. 0.8 40 max. - -
Over 0.8 - - 80 max.
OL C2700 T-OL C2700 TS-OL 4 & over, up to & incl. 250 0.3 & over, up to & incl. 15 295 min. 40 min. Up to & incl. 0.8 60 max. - -
Over 0.8 - - 90 max.
1/2H C2700 T-1/2H C2700 TS-1/2H 4 & over, up to & incl. 100 0.3 & over, up to & incl. 6 375 min. 20 min. - 53 min. - -
Over 100, up to & incl. 250 2.0 & over, up to & incl. 10 355 min.
H C2700 T-H C2700 TS-H 4 & over, up to & incl. 100 0.3 & over, up to & incl. 6 450 min. - Over 0.5, up to & incl. 6 70 min. - -
Over 100, up to & incl. 250 2.0 & over, up to & incl. 10 390 min.
Dimensions, Weights, and Tolerances in Diameter and Wall Thickness for Nominal or Standard Copper Water Tube To ASTM B88 (All tolerances are plus and minus except as otherwise indicated)
Nominal or Standard Size, in. Outside Dia., in. Avg. Outside Dia. Tolerance, in. WALL THICKNESS AND TOLERANCES, IN. Theoretical Weight, lb/ft
Type K Type L Type M
Annealed Drawn Wall Thickness Tolerance Wall Thickness Tolerance Wall Thickness Tolerance Type K Type L Type M
1/4 0.375 0.002 0.001 0.035 0.0035 0.030 0.003 C C 0.145 0.126 C
3/8 0.500 0.0025 0.001 0.049 0.005 0.035 0.004 0.025 0.002 0.269 0.198 0.145
1/2 0.625 0.0025 0.001 0.049 0.005 0.040 0.004 0.028 0.003 0.344 0.285 0.204
5/8 0.750 0.0025 0.001 0.049 0.005 0.042 0.004 C C 0.418 0.362 C
3/4 0.875 0.003 0.001 0.065 0.006 0.045 0.004 0.032 0.003 0.641 0.455 0.328
1 1.125 0.0035 0.0015 0.065 0.006 0.050 0.005 0.035 0.004 0.839 0.655 0.465
1 1/4 1.375 0.004 0.0015 0.065 0.006 0.055 0.006 0.042 0.004 1.04 0.884 0.682
1 1/2 1.625 0.0045 0.002 0.072 0.007 0.060 0.006 0.049 0.005 1.35 1.14 0.940
2 2.125 0.005 0.002 0.083 0.008 0.070 0.007 0.058 0.006 2.06 1.75 1.46
2 1/2 2.625 0.005 0.002 0.095 0.010 0.080 0.008 0.065 0.006 2.93 2.48 2.03
3 3.125 0.005 0.002 0.109 0.011 0.090 0.009 0.072 0.007 4.00 3.33 2.68
Nominal Outside Diameters and Thicknesses BS EN 1057
Dimensions in millimeters
Nominal Outside Diameter Nominal wall thickness e
d 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.5 2 2.5 3
6 X R R R
8 X R R R
10 X R R R R
12 X R X R R
14 X X X
15 X R R R X X
16 X X X
18 X R R X X
22 X X R R X R R
25 X X X
28 X X R R R R
35 X X X X R R X
40 X X
42 X X R R X
54 X X X R R R
64 X R X
66.7 X R X X X
70 X X
76.1 X R R X
R indicates the European recommended dimensions X indicates other European dimensions
Back to Top
ท่อทองแดง , ท่อทองเหลือง , ไร้ตะเข็บ , โลหะ , อุปกรณ์ก่อสร้าง , ท่อทำความเย็น , ผู้ผลิตท่อ , ท่อประปา , ท่อแก๊ส , ท่อดับเพลิง , ท่อลม , ท่อเพื่อการเกษตร อุตสาหกรรม , PIPE , BRIGHT TUBE , SEAMLESS COPPER TUBE , SEAMLESS BRASS TUBE , COPPER TUBE & BRASS TUBE TO ASTM JIS EN ALLOY C1220 , C2200 , C2300 , C2400 , C2600 , C2700 , C2720 , ASTM B42 , B43 , B75 , B88 , B251 , BSEN 1057 , BSEN 12449 , JIS H3300 , TUBE CUT TO LENGTH , TUBE FABRICATION , OD 1/4” , 1/8" , 3/8" , 2" , 1-1/2" , 1-1/4" , 1" , 3/4" , 1/2" , 2-1/2" , 3” , WALL 0.016” , 0.020" , 0.024" , 0.032" , 0.040" , 0.048" , 0.060" , 0.080" 0.1" , 0.12" , 0.14" , 0.20” , OD 6 mm. – 75 mm. WALL 0.4 mm. – 6 mm. , BRASS TUBE BENDING QUALITY FOR TRAPS , SHOWER ARM , C. P. SUPPLY TUBE, NIPPLES , SLIDING BAR FOR SHOWER , C. P. RAIL FOR TOWEL BAR , TYPE K , TYPE K , TYPE L , TYPE M , TYPE E , TYPE P , OD 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1-1/8" , 1-3/8" , 1-5/8" , 2-1/8" , 2-5/8" , 3-1/8" , TEMPER O , OL , 1/2H , H
Copyright © 2007 P.S. Metal Works Co., Ltd. All right reserved. [email protected]

Từ khóa » H3300 C1220t-0